15 minutes? 🤔 for all you diy’ers there’s point cleaning all that dirt out if you’re not going to clean the pads properly. They need to be cleaned on both sides until the water draining from them is clear because going by how much dirt is in the bottom of your unit the pads will be full of dirt too and the water coming off them will be basically muddy water.

Why placing the cooler on the roof?? It can't be fun carrying tools and climb to clean or inspect the cooler.

PS I have an electrician who would do the job but he is getting on a bit and I don’t want him on the roof for long if it is a complicated job. Thanks

Awesome video, thanks for the content ! Easy to understand and covers all the basics. Recently purchased a place with a coolair swamp cooler.. noticed that the ducts either have quite a hefty dust build up on the inside or black mould may be the culprit... going to attack a general service for the unit on the weekend.. but suspect new ducting will be the next step. Any advice on dust/mould in evaporative aircon ducts?

Hi, my breezair evaporative cooler won’t turn on. The diag light is green but the sal light is red and flashes twice. Any ideas

Great video. How do you stop the dust and particles blowing into the house once you have cleaned the blades?

Hey mate. We've got a Brivis L51 and it's starting to smell like mold. Can we clean the pads with a mold killer or would the pads need to be changed?? We've had them changed once but the new ones didn't last as long as the older ones and I have my concerns about mold spreading through the house if we run the unit. Thanks in advance.

Nice video. Mine has water leaking out one of the corners constantly into my gutters. Most likely the float maybe not shutting off so water is constantly being pushed in via the tap you reckon?

Great video, thanks. Just noticed that my breezair was dumping water all night, would this be the drain valve stuck open? The unit was off, I isolated the water as soon as I noticed.

Great video, thank you mate! As a bit if a novice, you mentioned isolating the fan before giving it a brush out. I hope not too silly a question, but how do I do this?

No nonsense video. Just cool professional explanation.

Fantastic video! Thank you for creating!

Nice, now onto your troubleshooting guide.

Thanks mate you saved me $$$ from your video I could tell my fault was dump valve stuck open. Simply gave it a clean and a spray of wd40 and it became unstuck .I also gave the unit a bit of a clean while I was up there . Thanks again

Chees for this mate....your a bloody legend

This is amazing thank you!

Thanks for the video :) very helpful :)

Exactley what I was after - A no BS clearly articulated to the point walkthrough, of course it took an aussie sparky to do so! 😊

Thank u

Thanks heaps mate, you're such a legend! My cooler is around 10 years now, is there any parts I should replace to keep it running smoothly?