What's your favorite way to fill mags? ▶ WHERE TO BUY GELLET DEPOT - amzn.to/3Udvhib

@masonandterrance103

Жыл бұрын

❤❤❤❤

Here's the secret. You have to physically tip the depot so it faces slightly up so you don't crush gels in it. And you also should shake it when you're draining the water.

@engineerable

Жыл бұрын

Thanks for tip, I do tilt and shake for draining, and that works well.

I have one, and it's really cool that it can be used like a funnel on it's own. It makes reloading both the standard 400 round magazines and the 1200 round (modded, thanks!), srb400 mags. Especially nice because my first srb broke a gear or more in the gearbox, meaning I now have 2 standard mags and a drum mag to fill. Still waiting to hear on if brand name gel blaster gearbox assemblies (lightning etc) can be put in to fully replace the gearbox on the srb400.

Cool Video! Really like the channel intro with the stop animation of the cassette tape. Clever!

that's pretty handy. I use those squeeze water bottles with the pour spout (or the condiments squeeze bottle, just exacto knife the tip to size for gellets; also I prep orbz in a bucket and transfer them to the squeeze bottles) or scoop from bucket and car oil funnel (although some you may have to use wire cutters to clip the tip to size for orbeez)

RIP to the bug at 6:50 😂 *At the back of gel container

@thepeskyone

Жыл бұрын

Bro got demolished 😭

I love my Depot. Thinking about ordering a couple more.

absolute must have.

1. They shoulda put a vent on the lid 2. Make easy to open valve 3 Angled the bottom of the bucket or Valve so the balls want to fall out. 4 Make valve more narrow at the tip or flexible tube on tip 5 Make valve that dosen't crush some of the balls when turned off

@engineerable

Жыл бұрын

All great ideas. I'm going to 3D print a flex tube that you need to pinch open to load gels. We'll see how that works.

@neonsurfer3217

Жыл бұрын

You cant except all of that for a such low price be happy.

@billted3323

Жыл бұрын

@@neonsurfer3217 You don't know how much it costs to make.

@RVDL

10 ай бұрын

@@engineerable Did you manage to find the time to create that flex tube yet? And is the 3d design available for purchase already?

6:40 - 6:50 that poor little bug got slammed 😭🤣

@engineerable

Жыл бұрын

RIP 🐜

I love mine way better then my old ones and I picked mine up at target along with my starfire xl

heres a tip i do for mine, just tip the bucket back when you are done filling your mags to avoid smashing

I need this I getting a gel blaster for Christmas

I love your intro! 😮

cool product. execution on that latch/drain leaves a lot to be desired.

Serial commenting at this point, I have noticed that any of the brands of gel balls you can buy at normal retailers like walmart, in the US, are all prone to having pre busted orbeez in the pack.

@engineerable

Жыл бұрын

Good to know. Hardened gel balls don't seem to have this issue.

The ants said “I wanna watch too”

thats realy cool

very satisfying

@Staypositive_qoutes

Жыл бұрын

How long to put them in

In Aus we all just use the black speed loader bottles for loading mags

@engineerable

Жыл бұрын

Unfortunately, we don't have those here, unless we order them from Zhenduo.

Dang those line on the orbes

I just used a ziploc bag to soak em a collapsible colander best way to strain, any bowl big enough to hold both the mag and your hand to scoop will suffice less money spent at the store

@gothamsfinest7317

Жыл бұрын

Anybody else try the old fashioned speed loading way airsofters do it?

Quick question can you replace the splat gun gearbox with a v3 metal airsoft gearbox?

@engineerable

Жыл бұрын

In theory yes, however there are some modifications required and replacing some parts with Gel blaster specific parts.

5:11 im calling the ant bobithy and the ant on the bottom at 5:19 is going to be named jeb

Hi, got a question do i really need to buy the official ammo from the Splatrball site for my splatrball gun? And if not can i buy other brand ammo or does it effect the fps in sort of way?

@engineerable

Жыл бұрын

You can use any 7.5mm ammo. Higher quality, harder ammo will perform better than Splatrball's fairly generic ammo.

@ZedricVa

Жыл бұрын

Thanks.

far out man!😃

Can I use the brand gel blaster beads on my splatrball

@engineerable

Жыл бұрын

Any 7.5mm ammo will work (7-8mm)

I got a black red slr m4 cqb can it also fill that one

@engineerable

Жыл бұрын

Probably yes

Oh that's what this is for. I have been putting hair gel in mine.🤔🤭

@engineerable

Жыл бұрын

Gel balls also make good hair gel

@franksworld9922

Жыл бұрын

@@engineerable only LA looks for me.

6:50 R.I.P ant

so from what im seeing in this is that its not really the containers problem it is the place you are using it on, i mean if you were to use it on a plastic table you could move the mags in different wats, the way it crushes the beads on closing it sucks though, would buy it

@engineerable

Жыл бұрын

Even when I use it on a table, I end up pulling it out such that it balances on the edge, and shaking it a little.

@ivanfigueroa2990

Жыл бұрын

@@engineerable dang they might need to make a v2 with a longer exit piece

I wish i woulda thought about it first prolly gonna make millions

Hey j have a question my slatrball will skip some bullets like i shoot and it shoots but it skips some i did let the ammo for 4 hours what can i do

@engineerable

Жыл бұрын

Full auto, single fire, or both?

@jorgeayon5636

Жыл бұрын

Both. When i shoot in single it takes a lo g time to shoot a bullet out and when its on full auto it skips some bullets it shoots but it skips them do you know what i can do?

One tip I would say is to leave some water to make the dispensing smoother

@engineerable

Жыл бұрын

The water self drains, and the balls stay wet on the surface. You don't want excess water in your mags or hoppers. All the water should be drained before dispensing. Otherwise it can damage your mag or blaster.

@Famous0pp

Жыл бұрын

@@engineerableright

I bought one and it does NOT close at the bottom all the way, i can store gel balls in here but you CANNOT grow them in here... i guess it varies if you get a good one or not. mine leaks like crazy.

@engineerable

Жыл бұрын

@Rashad Howard That sucks, it sometimes happens to mine when they sit with the valve closed for a while. The rubber seal on the door has come off. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video

@rashadhoward3903

Жыл бұрын

@@engineerable got mine from Walmart yesterday and fresh out the box it leaks

@engineerable

Жыл бұрын

@@rashadhoward3903 That sucks, it sometimes happens to mine when they sit with the valve closed for a while. The rubber seal on the door has come off. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video

What do I do mine won’t stop leaking from the bottom

@engineerable

Жыл бұрын

I recently noticed that the gasket can get stuck to the opening. Pull it out with your finger and reseat it on the door. Seems like a major flaw, because it will continue to happen once in a while.

The ants be like: OHH WOW WHAT U GOT HERE… oh thats a can and a GEL Mag so bigg

Do you service gel blaster for people ?

@engineerable

Жыл бұрын

Sorry, no, I only make videos of modding.

He killed the ant!

@engineerable

Жыл бұрын

Rest in power 🐜

:O High Capacity Magazine-Clip.

For its price it’s not worth it, maybe if it was like 5$ but it’s nothing special and anything else has just the same speed and consistency tbh. just my op tho 🤟

@engineerable

Жыл бұрын

What do you use?

@lebthot5787

Жыл бұрын

@@engineerable water bottles 😂 work great and are portable, you can also drain em easily and squeeze the air out them so they don’t crunch and rattle while you running💯plus the small back pack i run with already has 2 water bottle slots for quick reload

@engineerable

Жыл бұрын

@@lebthot5787 Makes sense for personal use. I hope this bucket will be better for gel blaster party with friends who are novices and make a mess with bottles. I've had a lot of spills when playing with friends. Maybe I'll put a 5 gallon bucket under this to catch F ups.

@lebthot5787

Жыл бұрын

@@engineerable good call fr, i’ve personally just never played a style where i’d be able to retreat to a fixed position to reload with one of these. new people do be spilling a whole bottle in the car

@kill3rgamingxd114

Жыл бұрын

@@engineerable bottles are better

2:55 so.. what you're saying is.. is that the bucket can get knocked down, just to get back up again, and that you're never going to keep it down? (cues Chumbawumba song)

@engineerable

Жыл бұрын

😂

How long does it take to get 10K to 6-8 mm

@engineerable

Жыл бұрын

Let them soak for 4 hours.

my mag doesnt have a top open part only of the sides

@engineerable

Ай бұрын

That sucks.

I have this and it is very hard to open and close

@engineerable

Жыл бұрын

The dispensing flap? Yeah, I mention in the video that it's not as easy as it should be.

I can’t believe gel blasters are illegal here in australia They’re quite literally just little bits of jelly, and not to mention, they are a kids toy, how does that work out?

@engineerable

Жыл бұрын

Yeah, that sucks.

@chezlordtheinevitable5726

Жыл бұрын

Oof you must not live in Queensland because you can get them here

@MobileDecay

4 ай бұрын

Lollipops are next on the chopping block! 🤯

Imagine if someone made a mod with this was the ammo storage of a top magazine gel blaster

@engineerable

Жыл бұрын

That would be crazy! Crazy heavy!

@holycrusader3119

Жыл бұрын

@@engineerable Mounted turret mode: Activated.

a sealed tab in front of the spout that slides upwards wouldve been a much better way to control the gel balls.slide it a little up to only let the water out, then slide it out fully to finally let the balls themselves out. then you can just slide it back down to close it with no loses. That tab is just asking for an eventual snap

@engineerable

Жыл бұрын

Yes, I also found out that the gasket will sometimes stick and come of the flap which causes it to leak until replaced properly

Anybody have a link for better quality gellets?

@engineerable

Жыл бұрын

Here's a list of the best gel balls www.engineerable.com/single-post/best-gel-ball-ammo-for-gel-blasters-7-5mm-or-7-8mm-diameter

@baseball_fanatics1293

Жыл бұрын

@@engineerable thank you

Unfortunate, this wouldn't work on our Aussie magazines, they have a much smaller fill hole. Otherwise this looks like a mad little gadget. Back to the good ol' milky whites in a 2L orange juice bottle for me then!

@engineerable

Жыл бұрын

I've heard the bottles you all use for filling the mags are better/faster. The issue I have is draining and getting the gels in those bottles without spilling a ton. Maybe I should use the Gellet Depot to fill the speed loader bottles.

This is for adults?

@engineerable

Жыл бұрын

Depends on the blaster. The pistol blasters are weaker and good for kids. The rifle sized blasters are stronger and good for teens and adults.

@markw.4679

Жыл бұрын

I have a gel blaster to play with my boys. They will remember it for the rest of their lives. I also own two Hasbro lightsabers to battle with them too. Great fun!! 👍

its biodegradable?

@engineerable

Жыл бұрын

What, the ammo?

@AdrenalineRushMX

Жыл бұрын

@@engineerable yes

Tips over the entire bin 3-4 times 'Something I noticed is that some of the balls are already broken'

@engineerable

Жыл бұрын

The gel balls are not that fragile. If they were, it would be a problem.

3:10 “slams contraption into table. (Not even a minute later) “so it seems that some of them are already broken since being grown”

@engineerable

Жыл бұрын

😂 the gels are not nearly that fragile...

@thegamingweeb3890

Жыл бұрын

@@engineerable it was a joke

@engineerable

Жыл бұрын

@@thegamingweeb3890 ahahaha, got it, others have commented that and I think some are seriously thinking it did break the gels. Sarcasm is hard to read.

A water bottle does the same thing for a fraction of the fraction of the price

I didnt het a funnel with mine

@engineerable

Жыл бұрын

Sucks, but should be easy to make with some thin plastic. Cut and bend the plastic window from product packaging to make your own funnel

Can I have a joe blaster

what you need is the black bottle gel speed loader you can pour the gellets into the bottle and use the spout to load the gellets whithout loseing any.

@engineerable

Жыл бұрын

I'm gonna make the 3L bottle version of that, otherwise it's go crazy refilling that little bottle. We go through 10,000 gels in no time.

I just use soda bottles

I see no reason to buy this why I would need it, can’t i just use a bottle and have an extra bottle cap that got drain holes that aren’t big enough for the gel balls?

@engineerable

Жыл бұрын

You can, and I used bottles before this. This just simplifies the whole process.

Was i the only one watching the ants die

@engineerable

Жыл бұрын

Nope, I never noticed it myself, until a ton of people started commenting about being an ant killer

Gel blasters have changed my life and not in they way you’d think You think I’m going to say ( they changed my life so things are fun) No what I mean is when someone tells me to touch grass I can’t the moment I go outside the entire neighborhood shoots me with those guns and it hurts worse then a nerf gun and you might say well it’s just some kids Here’s the thing they go around the neighborhood passing theses guns out to shoot I’m not risking a day in the hospital to bruises and injuries

@engineerable

Жыл бұрын

WTF bro?

SEE 1200

cant you just make your on diy one with one of those wine thingies

@engineerable

11 ай бұрын

Sure

@Wyrm_The3rd

11 ай бұрын

@@engineerable cool

Are gel balls like this dangerous to the environment? I know people assume they aren’t, but I’ve also heard of issues where a bunch go down a drain and clog a neighborhood’s sewers, or places where they’re left in fields and when it rains they swell up and animals eat them. Are we SURE they degrade over time? I thought it was like, a weird crystal,

@narutofox2100

6 ай бұрын

There bio degradable and they burst on impact 👍

Mine leaks

@engineerable

Жыл бұрын

The rubber seal on the door has come of. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video

@rashadhoward3903

Жыл бұрын

@@engineerable tried that and it won’t properly seal all the way I’ve pushed it on as hard as I can it still leaks… kinda sucks

@engineerable

Жыл бұрын

@@rashadhoward3903 when I said push, I mean that the seal needs to go over a mushroom like piece of plastic to lock it in place on the door. If it's not seated properly it will continue leaking.

I have one... I made the mistake of leaving it open the first time I used it and lost 5,000 gels 🤦🏾‍♂️🤦🏾‍♂️🤦🏾‍♂️

@engineerable

9 ай бұрын

Whoops, yeah it would be nice if it was spring loaded shut

@donaldmott4213

9 ай бұрын

@@engineerable have you tried the softien gel blaster yet? If so can u do a review on it? because I've been thinking about buying it

@engineerable

9 ай бұрын

@@donaldmott4213 I recommend buying something better quality. Check out this list www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023

@donaldmott4213

9 ай бұрын

@@engineerable I seen a couple that I liked, the unlox v2 pistol seems good, I didn't see the vector on there though, I wanted to get it too but it looks gas powered, and I don't want to hurt someone

It’s not flowing because you don’t have it opened all the way.

Maybe... and hear me out, maybe... some broke when you repeatedly knocked the container over onto the table!?

@engineerable

Жыл бұрын

They're not that fragile.

rather buy the black bottle, cheaper

some smashed maybe because you kept dropping the damn thing on the table? lmfao

@engineerable

Жыл бұрын

😂 if the gels we're that fragile...

THE BUG GOT KILLED RIP 😢

You forgot the SRB-375!!!!!

@engineerable

Жыл бұрын

Would probably work fine.

Bro has inf gel balls

@engineerable

Жыл бұрын

This is nothing...

I wonder why they’re already smashed you were literally knocking the thing over

@engineerable

Жыл бұрын

😂 the gels are not that fragile.

3:24 they are broken probably cuz you slammed it over a bunch

@engineerable

Жыл бұрын

Gels are not that fragile. Throw one at the ground, and it will just bounce. Many don't even burst on impact. Those are broken from the package.

Tilt it back an it wont smash the gel balls

Tons of user error in this video

or they could have smashed when you were throwing them around like a rag doll

@engineerable

10 ай бұрын

They're not that fragile

def not work the price

or you could just buy a speed loader from tactical edge 💀

@engineerable

Жыл бұрын

The speed loader bottle is probably faster to load a mag, but you still need to grow the gels and strain them. This is an all in one solution. Also, why don't they make the speed loader bottles clear so you can see how much is in there?

@KeysNoE

Жыл бұрын

@@engineerable I dunno, I think the black is just for asthetics tbh

@KeysNoE

Жыл бұрын

@@engineerable I wonder if there is a clear 3d printing filament that you could make one with

@engineerable

Жыл бұрын

@@KeysNoE I was thinking about 3D printing a nozzle that fits over a clear soda bottle's cap. Still have to soak, drain, and get the gels into the soda bottle though.

@KeysNoE

Жыл бұрын

@@engineerable what if you did it inside the soda bottles? Maybe had a little slider to drain and stop gels from getting out

$289 No thanks!!!!!!

This is cap Mine leaked immediately

@engineerable

Жыл бұрын

Sucks! I noticed that the gasket on the door flap can come off. I never had the issue, but others who didn't know what they were doing managed to get it to come off. Check that.

all right now shoot every single round that you loaded

@engineerable

Жыл бұрын

That's what your mom said... 😂 (username ✔️ out)

This is such a waste of money

6:50 damn ant killer

One of my splatrballs is fuckedup. Every time I shoot the gel balls break

@engineerable

Жыл бұрын

Maybe a problem with the tappet plate. Could be bent, but that usually only leads to not firing. First thing to try is hardened gel balls like the Warinterest 3.0

@cityoftrees9953

Жыл бұрын

@@engineerable thanks I’ll try those. And it came out the box not firing.

@engineerable

Жыл бұрын

@@cityoftrees9953 If it did that from new, then it's likely a dud. I had one that didn't shoot consistently and returned it. Later I figured out that it's the tappet plates are already bent sometimes and doesn't pull the nozzle far back enough to load a gel ball.

@cityoftrees9953

Жыл бұрын

@@engineerable man it said don’t return to the store or I would have. Now I’m stuck tryna make it work smh. May just try to return to the company.