OUR WEB SITE www.coperacing... ANDY WOOD / channel MARSHALL SANDERS E4OD 4R100 TECH VIDEOS www.youtube.co...
Жүктеу.....
Пікірлер: 44
@FarNorth12vАй бұрын
I think I’ve seen you post on a couple 4r100 pages/fummins pages on FB… I’m going to be stoked to have this in my 24v ppump fummins. Finally get to ditch the US Quick Shift and go all manual! You are a genius
@chrishorst6993 Жыл бұрын
This would be great. That means street driven can have overdrive and the ability to hold more power. Thank you for doing this. I wonder why no one else tried this until you figured it out
@themacgyverinstitute5340 Жыл бұрын
Thinking is the hardest work you can do….. now it’s the fabrication and setting it up . I absolutely love the stand alone non computer reliance .
@BigBlock402 Жыл бұрын
Im excited to see this go into production. I have a 4R100 in my 2008 F150 and I have had it apart and back together twice. Its a great transmission and I love the way it shifts. The ability to have this all manual and with a brake is just unreal. I think this is a huge market just waiting to be fed. Thank you John for looking at this> I would run a 4R100 in multiple vehicles if possible. Coan Racing builds 9" converters for the C6 , Maybe they could do one for a E40D.. .Be worth asking
@bbkr7910 Жыл бұрын
Found your transmissions looking for a solution for my 360LA build and now may get to have a solution for my 460 BBF build. Thank you for all of your ingenuity and hard work!
@SmithRacing623 Жыл бұрын
I am ready to buy one as soon as they are ready, reverse manual, trans brake not needed for me
@jesusisalive322711 ай бұрын
I want one for my 1970 f100! I'm putting an efi 460 in it and would love to use the tranny that's bolted to it (e4od) but I'd rather have a zf5. This would be the best of both worlds.
@bcbloc02 Жыл бұрын
Figuring it all out to make it how you want it will make for an awesome piece in the end.
@craigchiddo2794 Жыл бұрын
Is there any way to get rid of the electronic control and keep it automatic or can you run a manual valve body on the street
@michaelcoger462611 ай бұрын
Have you checked with Allen Pope converters out of FL.
@coperacingtrans
11 ай бұрын
I have not
@masonmoyer4592Ай бұрын
Is your valve body finished yet I am interested in one for a project that my girlfriend and I are starting? When I was young my father had 69 mustang with a 351 Cleveland that was built by Jerry Hartman who owned Hartman’s driveshaft in Reading Pa and the car had a c4 with a manual value B&m and it was awesome and I would like to be able to have the same but in a 95 f150 4.9 e40d. Thank You
@coperacingtrans
Ай бұрын
@@masonmoyer4592 yes it is
@droppedf100 Жыл бұрын
Very cool to see. I have one truck with an e4od and one with a c6.
@kevinharrington490710 ай бұрын
The second you get these out I’m going to have one on order!! You would open up a huge market for 7.3 guys and even people who want to do a Cummins swap on their ford, I hear of people who have a hard time tuning the trans to work right with the Cummins swap, this would be the best thing instead! I’m excited!!
@1991tommygun3 күн бұрын
If you can help me make the E4OD in my 1991 Bronco with a 351w fully manual so i can go carburated i have the Money ready!!!$$$$ ive been searching for something like this for so long! Im done with solenoids and computers!
@coperacingtrans
3 күн бұрын
www.coperacingtrans.com/?product_cat=ford-e4od-4r100 It is all listed here
@1991tommygun
2 күн бұрын
I sent you an email. I need a few more things! @@coperacingtrans
@bbkr7910 Жыл бұрын
Several companies that might be able to build a high stall E4OD/4R100 torque converter: Roadrunner Converters (Phoenix, AZ) Pro Torque (Yeadon, PA) RevMax (Charlotte, NC)
@d.collier_8280 Жыл бұрын
This sounds like the perfect trans for my 400hp 85 F150 with a AOD trans.
@hankclingingsmith8707 Жыл бұрын
There is a market for what you are doing. Diesel guy like it to
@redbeaver1006 ай бұрын
The website says April 1st huh? I’d like to get my hopes up but seems a little fishy🤔
@coperacingtrans
6 ай бұрын
Fishy how ?
@redbeaver100
6 ай бұрын
@@coperacingtrans I’ll be waiting for someone to yell “April Fools!!” In all seriousness, I’d love to put one in my 7.3.
@coperacingtrans
6 ай бұрын
@@redbeaver100 not a joke. Look at some of my videos
@redbeaver100
6 ай бұрын
@@coperacingtrans Just went down the rabbit hole, looks awesome. Keep up the good work 👍🏻
@DougsterWolverineGarage Жыл бұрын
Cope! I got faith in you my brother! You can do it! 🥔🥔🥔🥔
@coperacingtrans
Жыл бұрын
Thanks Doug. 🥔
@1959nickd Жыл бұрын
very cool
@johnwilburn Жыл бұрын
Getting rid of Ford’s horrible column shift is selling point all by itself! Transbrake solenoid on the “top” of the valvebody?
@coperacingtrans
Жыл бұрын
on Top of the valve body when the trans is on the bench
@adamsorell4851 Жыл бұрын
Not all worm passages are the same between early and late e40d and 4r100
@cncfabrication Жыл бұрын
I sent you a message via FB messenger awhile back on tests one of these for you.
@coperacingtrans
Жыл бұрын
I am making one protype, from scratch. I will be testing it in my transmission dyno, then if all is good, a F250 truck. Once I have this all tested and everything is tweaked, and I have a 100% working Protype, I then will test it in something fast.
@UnfinishedProjectDartSport Жыл бұрын
All of this voodoo, he’ll still be able to give an excellent description of JMJs taillights to a sketch artist 😂 🥔
@coperacingtrans
Жыл бұрын
lmao
@gradyfarrer5146 Жыл бұрын
There are multiple transbrakes out there for the e4od/4r100 Some of them have been prototyped and only a small circle knows Some of them have been published/marketed even in magazine articles this year already Best of luck on your design, it will join the others already out there
@coperacingtrans
Жыл бұрын
I have seen Ethan's prototype, I have looked on line and did not find any trans brakes out there from any company. If you have links to them, it would be much appreciated.
@gradyfarrer5146
Жыл бұрын
@@coperacingtrans I have been involved with a beta design, and I know there is one more that I wasn't involved with...besided Ethan's These are based on stock castings and they remain autoshift
@coperacingtrans
Жыл бұрын
@@gradyfarrer5146 Well, I have seen none on line, none in production, none for sale. Just like my 48RE valve body, this 4R100 valve body will be like no other.
@chuckvanvleet1268
Жыл бұрын
A1 transmission experimented with it a while ago I've been waiting and wanting one for a lighting if you get it working I'm definitely going to be in line to order
@richardmoerke9329
Жыл бұрын
DAM!!!!! You are going to be a hero!!! Ford people will be at your feet kissing them. I can’t believe someone has not done this already. It seriously takes a man like yourself to do this. I really hope you get this done. Be really cool to see you and Andy working on this project together.
Пікірлер: 44
I think I’ve seen you post on a couple 4r100 pages/fummins pages on FB… I’m going to be stoked to have this in my 24v ppump fummins. Finally get to ditch the US Quick Shift and go all manual! You are a genius
This would be great. That means street driven can have overdrive and the ability to hold more power. Thank you for doing this. I wonder why no one else tried this until you figured it out
Thinking is the hardest work you can do….. now it’s the fabrication and setting it up . I absolutely love the stand alone non computer reliance .
Im excited to see this go into production. I have a 4R100 in my 2008 F150 and I have had it apart and back together twice. Its a great transmission and I love the way it shifts. The ability to have this all manual and with a brake is just unreal. I think this is a huge market just waiting to be fed. Thank you John for looking at this> I would run a 4R100 in multiple vehicles if possible. Coan Racing builds 9" converters for the C6 , Maybe they could do one for a E40D.. .Be worth asking
Found your transmissions looking for a solution for my 360LA build and now may get to have a solution for my 460 BBF build. Thank you for all of your ingenuity and hard work!
I am ready to buy one as soon as they are ready, reverse manual, trans brake not needed for me
I want one for my 1970 f100! I'm putting an efi 460 in it and would love to use the tranny that's bolted to it (e4od) but I'd rather have a zf5. This would be the best of both worlds.
Figuring it all out to make it how you want it will make for an awesome piece in the end.
Is there any way to get rid of the electronic control and keep it automatic or can you run a manual valve body on the street
Have you checked with Allen Pope converters out of FL.
@coperacingtrans
11 ай бұрын
I have not
Is your valve body finished yet I am interested in one for a project that my girlfriend and I are starting? When I was young my father had 69 mustang with a 351 Cleveland that was built by Jerry Hartman who owned Hartman’s driveshaft in Reading Pa and the car had a c4 with a manual value B&m and it was awesome and I would like to be able to have the same but in a 95 f150 4.9 e40d. Thank You
@coperacingtrans
Ай бұрын
@@masonmoyer4592 yes it is
Very cool to see. I have one truck with an e4od and one with a c6.
The second you get these out I’m going to have one on order!! You would open up a huge market for 7.3 guys and even people who want to do a Cummins swap on their ford, I hear of people who have a hard time tuning the trans to work right with the Cummins swap, this would be the best thing instead! I’m excited!!
If you can help me make the E4OD in my 1991 Bronco with a 351w fully manual so i can go carburated i have the Money ready!!!$$$$ ive been searching for something like this for so long! Im done with solenoids and computers!
@coperacingtrans
3 күн бұрын
www.coperacingtrans.com/?product_cat=ford-e4od-4r100 It is all listed here
@1991tommygun
2 күн бұрын
I sent you an email. I need a few more things! @@coperacingtrans
Several companies that might be able to build a high stall E4OD/4R100 torque converter: Roadrunner Converters (Phoenix, AZ) Pro Torque (Yeadon, PA) RevMax (Charlotte, NC)
This sounds like the perfect trans for my 400hp 85 F150 with a AOD trans.
There is a market for what you are doing. Diesel guy like it to
The website says April 1st huh? I’d like to get my hopes up but seems a little fishy🤔
@coperacingtrans
6 ай бұрын
Fishy how ?
@redbeaver100
6 ай бұрын
@@coperacingtrans I’ll be waiting for someone to yell “April Fools!!” In all seriousness, I’d love to put one in my 7.3.
@coperacingtrans
6 ай бұрын
@@redbeaver100 not a joke. Look at some of my videos
@redbeaver100
6 ай бұрын
@@coperacingtrans Just went down the rabbit hole, looks awesome. Keep up the good work 👍🏻
Cope! I got faith in you my brother! You can do it! 🥔🥔🥔🥔
@coperacingtrans
Жыл бұрын
Thanks Doug. 🥔
very cool
Getting rid of Ford’s horrible column shift is selling point all by itself! Transbrake solenoid on the “top” of the valvebody?
@coperacingtrans
Жыл бұрын
on Top of the valve body when the trans is on the bench
Not all worm passages are the same between early and late e40d and 4r100
I sent you a message via FB messenger awhile back on tests one of these for you.
@coperacingtrans
Жыл бұрын
I am making one protype, from scratch. I will be testing it in my transmission dyno, then if all is good, a F250 truck. Once I have this all tested and everything is tweaked, and I have a 100% working Protype, I then will test it in something fast.
All of this voodoo, he’ll still be able to give an excellent description of JMJs taillights to a sketch artist 😂 🥔
@coperacingtrans
Жыл бұрын
lmao
There are multiple transbrakes out there for the e4od/4r100 Some of them have been prototyped and only a small circle knows Some of them have been published/marketed even in magazine articles this year already Best of luck on your design, it will join the others already out there
@coperacingtrans
Жыл бұрын
I have seen Ethan's prototype, I have looked on line and did not find any trans brakes out there from any company. If you have links to them, it would be much appreciated.
@gradyfarrer5146
Жыл бұрын
@@coperacingtrans I have been involved with a beta design, and I know there is one more that I wasn't involved with...besided Ethan's These are based on stock castings and they remain autoshift
@coperacingtrans
Жыл бұрын
@@gradyfarrer5146 Well, I have seen none on line, none in production, none for sale. Just like my 48RE valve body, this 4R100 valve body will be like no other.
@chuckvanvleet1268
Жыл бұрын
A1 transmission experimented with it a while ago I've been waiting and wanting one for a lighting if you get it working I'm definitely going to be in line to order
@richardmoerke9329
Жыл бұрын
DAM!!!!! You are going to be a hero!!! Ford people will be at your feet kissing them. I can’t believe someone has not done this already. It seriously takes a man like yourself to do this. I really hope you get this done. Be really cool to see you and Andy working on this project together.
🥔