e142: MIP 17160 Ball Differential installation in Tamiya Hotshot
Фильм және анимация
Thank you for watching my video! This is the information you will need to pre-order the MIP Hotshot Super Ball Diff.
Here are the links to the MIP parts featured in this video:
Hotshot:
www.miponline.com/Tamiya-1-10...
BigWig:
www.miponline.com/Tamiya-1-10...
Please, visit my sites:
Facebook: / amproengineering
Instagram: / amproengineering
Many of my designs and threads can be located at
www.tamiyaclub.com/forum/index...
If you enjoy the music featured on my videos, please visit Blue Pinto’s official site here:
/ bluepinto
www.reverbnation.com/bluepinto
I always enjoy constructive criticism and would love to know what you think about my designs.
Please subscribe as I have hundreds of other upgrades for many, many other cars, rc cars, toys, and anything else that I think needs upgrading!
**I have no tolerance for disrespectful posts, foul language, cyber-bullying, sexism, homophobia, racism and anything else that has no place in society. This is a family friendly channel so I have soap next to me for every time I say a bad word. Any foul or abusive post will be removed and you will be reported to KZread.**
Пікірлер: 75
Hopefully they get them back in stock soon
@AMPROEngineering
Жыл бұрын
That is a good question. I dont know if this product is out of production or not.
I have one for my bigwig that I plan on installing one day.
@AMPROEngineering
6 ай бұрын
Nice. I like the big wig.
you sir are a pro!!!
@AMPROEngineering
2 ай бұрын
Hahah! Thanks!
Just got my kit ,chasing my custom parts before I start the build
@AMPROEngineering
4 жыл бұрын
That’s what I do. Get all your aftermarket parts and then build
This MIP product / upgrade is the best thing for the Hotshot. Thanks so much for sharing. 😎👌🏼
@AMPROEngineering
3 жыл бұрын
Anytime John!
Very detailed instructions. All such videos should be this good.
@AMPROEngineering
5 жыл бұрын
That is kind of you!
How come you don't offer a gearbox case with larger hole for this MIP ball diff? So no needed to drill holes on the stock ABS gearbox case. Also, nylon Is more solid than ABS for suspension mounting issue
@AMPROEngineering
3 жыл бұрын
The case would cost upwards of $250 for the print.
Great instructional video! The Hotshot is one of my all time favorite RC cars ( I'm kinda addicted to em' ) and cant wait to see how it performs. I wouldn't hesitate to put this on my Re-Release, but couldn't bring myself to hacking into a MK1 :)
@AMPROEngineering
6 жыл бұрын
I agree. This vintage one is a wreck so it didn't bother me at all but a minty vintage one? no.
Oh man Steve Shen is gonna be excited about this one! Awesome MIP is quality!
@AMPROEngineering
6 жыл бұрын
I do love MIP!
Excellent!
@AMPROEngineering
6 жыл бұрын
Thank you!
I really love watching your video
@AMPROEngineering
5 жыл бұрын
Thanks Jared.
Just been watching it again that is really a great hop up for the hotshot.
@AMPROEngineering
6 жыл бұрын
Thank you! I really like it.
Any running video bud?
@AMPROEngineering
2 жыл бұрын
Weirdly no. I need to make one. It transformed the car.
great work as always
@AMPROEngineering
6 жыл бұрын
Very nice of you to say!
great video!
@AMPROEngineering
6 жыл бұрын
Thanks!
love the videos man!
@AMPROEngineering
6 жыл бұрын
Thanks so much!
😊👍Very nice how to!
@AMPROEngineering
6 жыл бұрын
Thanks man!
Nice work.Really good info and tips
@AMPROEngineering
6 жыл бұрын
Thank you! Glad you liked it.
@robertrosson1990
6 жыл бұрын
AMPRO Engineering just built the same with my grandson at 5yrs old he loves wrenching with me lol
@AMPROEngineering
6 жыл бұрын
That's awesome! I build everything with my little one and she loves it. Kids need to learn that you can work and build with your hands still. They aren't just for playing video games.
That will go like a rocket ship especially if it's brushless
@AMPROEngineering
6 жыл бұрын
That's for sure. I think I have a 14T brushed motor in it. I have a complete set of printed suspension coming in soon.
Great video Alberto!
@AMPROEngineering
6 жыл бұрын
Glad you like it!
@AMPROEngineering
6 жыл бұрын
Thank you! I little boring this one...
Great work man😀👌👍
@AMPROEngineering
6 жыл бұрын
Thanks man.
Those expensive but second to none MIP Hotshot diffs, should of been fitted to a new rerelease Hotshot or Super Hotshot, BigWig & Boomerang buggies. Not a brittle 35 year old vintage Hotshot! I would like to see a brushless MIP Hotshot or one of the other buggies above.. In a running Video 😊
@AMPROEngineering
4 жыл бұрын
I totally agree. That is why i threw so much of this into the recycling bin.
Well, I liked the comic relief you inserted here and there at the HotShot’s expense 😝, 2-3 weeks to tear down, I could do it in about 10 minutes. The drilling scared me to death though, have to admit that. Good to see “ole 62” is still kicking, even if it doesn’t have its lid 😱. Is it just me or did the one bearing on the front gearbox not seat all the way in?? It looked a little off
@AMPROEngineering
6 жыл бұрын
Hmmm, maybe I didn't push it in all the way for the video. They are all seated though. Yeah the car is back and alive again!
Great video, very good explanation of all the steps for installing the MIP diffs. I know I'm a little late to the party, but I just bought an MIP diff set for my re-release Super Hotshot, and so far I've built both diffs and installed the rear one. I noticed that there's quite a bit of play in the rear dogbones, enough to make them slide up into the diff outdrive and bind a little when the suspension is decompressed. Should I be fitting an o-ring in the diff outdrive in this case?
@AMPROEngineering
3 жыл бұрын
I am assuming you installed the MIP bones right? If so, yes, add an o-ring on the diff side but ensure there is no binding.
any luck with the King Blackfoot front differential that holds the wheels on
@AMPROEngineering
6 жыл бұрын
Nope. You will see it on instagram and FB when i am working on it.
Awesome video bud 😊👍👍
@AMPROEngineering
6 жыл бұрын
Thanks Christopher!
HEH its like the makings of a SUPER superfly
@AMPROEngineering
6 жыл бұрын
That's the truth...
7:33 🤣
@AMPROEngineering
Жыл бұрын
Yeah more parts than im used to!
Hi your videos are very informative! I have a question...I’m getting ready to start the hotshot build and while studying the assembly manual I notice there’s a washer that is marked as “B6” on page 5 step 5. I don’t see it listed anywhere in the parts pages located at the end of the manual. Would you be able to help me figure this out?
@AMPROEngineering
6 жыл бұрын
Hmmm, B6? Well it tells me it is on the "B" Tree right? ISomeone asked me to 3d print some a while ago but when I built the last 2 from the MIP diff build, I did not even use any of them. Here is the part I made but Ill need to find out where they go. The FB hot shot group is a great place to look. www.shapeways.com/product/64GPBBWHU/047003-01-hotshot-b6-disc-spacers?optionId=65699041
@ss9c1
5 жыл бұрын
It is part of the left roll cage tree, or "B" tree.
If I were to buy a re release hotshot or bigwig and power it with a mild brushless, just as a car to have fun with, no track racing, would there be any reason to get one of these diff sets? Btw, a thoughtful and educational video as always.
@tairikuookami4949
6 жыл бұрын
The base kit is set up for a Tamiya GT Tuned motor at best, if you want a brushless setup no matter how mild I'd get the diff, brushless motors just have so much more torque. If that diff is anything like the super ball diff for the Blackfoot it's going to be awesome!
@AMPROEngineering
6 жыл бұрын
The main reason for this is to tighten up the open diffs. These cars are bad in turn when the inside wheel unloads and all the power goes to them making the car basically stop in its tracks. This eliminated that! Even with no track racing you will love the set. Thank you so much for your kind words Nick.
@AMPROEngineering
6 жыл бұрын
It is the same diff as the BF with a different diff gear and dog bones so yes, it is awesome!!! Haha!
Will these work with the rerelease Super Hotshot as well?
@AMPROEngineering
6 жыл бұрын
I do not know. It depends on what diffs they have from stock and I know little about the HS family. Sorry.
@rcalltypes8230
4 жыл бұрын
Yes it will, the Super Hotshot is a Hotshot with all the factory Hop-Up’s.
👍
@AMPROEngineering
4 жыл бұрын
Thanks!
I'm getting ready to buy a hot shot original found in a basement by somebody that doesn't know what it is. What is a fair price to offer for a unrestored, front broke a arm missing lights. Basically what's a fair price to give? And I do need an answer by tomorrow.Thank you for your time.
@AMPROEngineering
6 жыл бұрын
Jeez... $50? Really depends on a lot. Most likely it need both trans cases and all the arms.
Show,,,,,,,,,,
@AMPROEngineering
4 жыл бұрын
It is covered here.