HEY! you guys might be small but i value YOUR reviews more than the bigger guys. Real reviews from real people is where it's at! Keep it up.

@PetrincicBrosRC

6 жыл бұрын

Thanks F. Guys like you makes us going on in the search for the truth. Oh yeah... Big salute to you from Slovenia and stay well my friend. Cheers, Robert

Yes, Capt. Blaz we like listening to the details that Robert shows us.

Capt. Robert, I am just now putting together the Dynam P-61. So far, you are very correct on mounting the rear section to the main unit. I have tried to put the two sides together numerous times hoping there would not be a gap. Only once on one side did it go together tight without wanting to push back out. Inside the main unit tubes is a small square space where the wiring must fit in order for the rear unit to fit flush with the main. But because I could not get the other side as tight, when I backed out the good fit, it didn't want to fit tight again. It is something to do with how the wires rest inside that small space. Even if I get it to fit tight, I still am going to put glue around the space to help keep it together. Flat black paint is the easiest to blend so once the glue is dry, I will paint over it with black touch up paint to blend it in with the rest of the model. And tell Capt. Blaz that sometimes it helps to be "wordy".

@PetrincicBrosRC

4 жыл бұрын

Well, its Dynam my friend. Still Iam happy to have this bird. It looks great in the air. Good luck on your maiden.

THANK YOU MY BROTHERS OF SLOVENIA. A VERY NEEDED VIDEO BECAUSE I AM A NEW RC PILOT BUT HAVE BUILT 25 BALSA PLANES IN THE PAST AND I KNOW HOW THINGS GO TOGETHER. I STARTED FLYING RC IN MAY 2016 AND HAVE FOUND THAT THE CHINESE DO NOT UNDERSTAND HOW THINGS ARE SUPPOSED TO GO TOGETHER WHEN YOU PAY GOOD MONEY FOR THEIR PRODUCTS. I HAVE ORDERED AND ASSEMBLED 1 APPRENTICE, 3 TIMBERS, 3 PULSE 15e, 1 EDGE BLUE 540, 1 ZAZZY AND 1 ASW 28. I HAVE FOUND THAT ALL OF THESE FOAMIES REQUIRE...AS THEY SAY "SOME HOBBYING"...OR IN SOME CASES, A LOT OF HOBBYING!!! THANK YOU MY FRIENDS AND "OOOHHHHHHHH YYYYEEEAAAHHHHHHH...!!!!!!"

@PetrincicBrosRC

6 жыл бұрын

Hey Johnny, like you said. But in 2017 something like this must just not happen. But I will forgive Dynam if the baby will fly well. I really hope for some good low flybys. Oh yeah... Good to haer that you also enjoy this beautiful RC world. Stay well and see you soon, Robert

Thank you so much for putting out this honest review. I was actually considering this plane until I saw all the problems you showed. Who wants to pay $270 for something that's impossible to assemble? And from watching the reviews of other Dynam planes, this is not a unique experience.

it's a good thing you guys were putting this one together, not sure if the average guy could .. you made it look nice when the craftsmanship was so poor, i cannot believe the way the carved the foam under the engine cowl, they should be embarrassed .. i would pay 300 bucks for that prop shaft you guys made before this! bravo.

Many thanks for all of this information It is very interesting

Hi Guys, You have done a fantastic job putting that together. she looks great and I cant wait to see you take her up,

@PetrincicBrosRC

6 жыл бұрын

Thanks George. Me too. I will forgive Dynam if we can fly this baby and film some low flybys. Oh yeah... Cheers, Robert

Well done Robert and Cap Blaz! I hope this video forzed the Dynam to work better in the future!

@PetrincicBrosRC

6 жыл бұрын

Oh yeah Andrea. We just had to show this plane to the RC lovers. But like I said, I will forgive Dynam if the baby will fly well. So thanks for stopping by and see you soon, Robert

Thanks for the detailed review! Thumbs up!

@PetrincicBrosRC

6 жыл бұрын

Oh yeah Attila. We just had to film this review becouse of all mistakes on the plane. But I really hope for a good maiden and I kind of like this baby. Its not the planes fault to be like this. Stay well my friend and see you soon, Robert

You guys make a great pair. You should have a tv show. Captain Blagh is very entertaining with his camera work and I love it when you argue.

@Salty_reviews

6 жыл бұрын

BassmasterBling It's Captain Blaz I think

@PetrincicBrosRC

6 жыл бұрын

Thanks B. We just want to tell the truth to RC lovers. And we love planes so much. Oh yeah... So stay well and see you soon, Robert

wow what a shame for Dynam to turn out work like that ! but you done a great job on the build . you guys are the best !!!!!!

@PetrincicBrosRC

6 жыл бұрын

Thanks Rex. We always tell the truth about the planes. But this time I really hope for a good maiden flight. Nevertheless this baby still looks great. Oh yeah... Cheers, Robert

Still looks like a beauty, would love to see her fly.

@PetrincicBrosRC

6 жыл бұрын

Like you said Mark. I will forgive Dynam all if this baby will fly well. Oh yeah... Cant wait to test it. Be well and see you soon, Robert

I appreciate your channel immensely. Great info, great enthusiasm,awesome tips for success great flights great non landings too lol. The bird flies great from other reviews same quality issues for build though .dynam step up quality and training please your planes look great, Fly great , are tough but fiddly to make correct .2 out of 3 aint bad hahaha

Man, I knew that it would be rough, but that's crazy, come on dynam get it together!

@PetrincicBrosRC

6 жыл бұрын

I just hope for some good flying and zooming ;) Cheers, Robert

@matthewbrothers2823

6 жыл бұрын

Robert Petrinčič they do fly well, hopefully this one will fly well after all you had to do

Good work fixing Dynam's quality problems Captain. I look forward to seeing the maiden flight, hopefully it's not the last flight!

@PetrincicBrosRC

6 жыл бұрын

Like you said M. I really hope for a good maiden too. It still looks awesome and I can just imagine this baby at low flybys. Oh yeah... Stay well and see you soon, Robert

I am going to cancel my order for this one also!! You guyz are saving me lots of money! Thanks for a job well done

@elpunto231

6 жыл бұрын

Dick the Diver this is the point to tell our friends what to expect when they buy a certen plane....

@dickthediver5525

6 жыл бұрын

Absolutely! Dyman planes tend to be on the very cheap side and I don't like them

@PetrincicBrosRC

6 жыл бұрын

Hey Dick. Dont worry. Like I wrote, they have stopped selling the planes like this. They will fiy all this problems before they release it again. And I can tell you that if MotionRC will be selling this baby you can trust them that the baby is good for the money. They didnt want to sell this plane just becouse of all this mistakes. So wait for avile, maybe the V2 will be like it must be. Stay well and see you soon, Robert

You guys make me laugh my ass off! Keep up the good work. With this hobby sometimes you get a lemon and that's exactly what you got there bud.

@PetrincicBrosRC

6 жыл бұрын

Like you said R. But in 2017 something like this just must not happen to RC lover. But I hope for a good maiden flight and maybe I will forgive Dynam for this. Oh yeah... Stay well and see you soon, Robert

Thanks for your support to Dynam plane. The suggestions from everyone are important to us. In fact, we solved these assembly and disassembly issues like installation gap, the placement of servo wires in the new consignment of P-61 planes.Beside, we replace the 8×6 main wing carbon tube with 10×8 size to increase the strength of wing and reduce the installation gap. For more stable, we increase the number of carbon fiber plates.We also made some optimizations to increasing the joint strength between landing gear and fuselage which means the possibility of landing gear damage is effectively reduced. We will post some pictures about P-61details on facebook when our R&D staffs arrive at the factory. We alway hope that we can provide the better plane for everyone who like Dynam :)

@PetrincicBrosRC

6 жыл бұрын

Hey Dynam. Thanks a lot for the answer. I must tell you that I really like the plane and I respect that you decited to make this awesome plane in foam version. But like you were able to see in this video something with this mistakes must just not be on a new plane. I know that you will fix this things and you will put on the market awesome, awesome plane. I have your Dusty, beautiful plane and I have recenetly bought A-10 and Grand Cruiser. Those two I must assemble first. I know that you are trying hard and if you want we can test your planes before you put them on the market. We will tell you the truth if the plane is OK or not, or what to fix. So thanks again for the reply and we wish you all the best in the future. Greetings from Slovenia, Pilot Robert

I hope Dynam sees this! I love their planes and want to get one and I don't want this quality!!!! Juts had my first experience putting a plane together and it was a 64mm edf f-18 blue angels by Force Rc! Was easy as pie!

@PetrincicBrosRC

5 жыл бұрын

Me too my friend. But I think that they just dont care. And that EDF is really one good looking baby. Oh yeah.

Nice review my friends on the p-61. Dynam seems to have some planes that are badly assembled. I have a Dynam warbird , i dont think I'll ever buy another one from them. Great work you did on her , lets just hope she will fly as good as she looks. !!!!!!

@PetrincicBrosRC

6 жыл бұрын

Hey Sean, like you said. I was really surprised by this quality or what ever we can call this. I still have A-10 and Grand Cruiser to assemble. I hope that those two will be better. But I really hope for a good maiden flight with this baby becouse it does look awesome in that black paint. So stay well my friend and see you soon, Robert

Hope that this does not fall from the sky because of the bad quality, because then it could better renamed to widow maker ... thank you very much for an objective video again. You can also learn a lot from your knowledge! 👍as always.

@PetrincicBrosRC

6 жыл бұрын

Thanks Louis for kind words. We just had to show the viewers this. And I really hope for some good flying with the baby and some good low flybys. Oh yeah... Be well my friend and see you soon, Robert

Nice work btw with the home made prop adapter :-)

@PetrincicBrosRC

6 жыл бұрын

What to do. I broke it, try to find another but no way to get it in my country. But this will do and it really doesnt look so bad. It fits perfectely. Oh yeah... Cheers, Robert

I know you were a awesome machinest. nice work on the prop shaft. I'm jellous. I break those things alot. would be cool to make my own. Robert I wanted to tell you that I got a second hand plane today for 70 dollars a 1200mm. hobby king Corsair and it is really nice and I can't wait to put my maiden flight on her sorry to see the shotty dynam product. I have been down that road too you just have to grin and bear it buddy. the plane I got had exactly the same instructions. I laughed when I saw your set another good honest opinion. good work guys 😎

@PetrincicBrosRC

6 жыл бұрын

Thanks Roy. And I wish you good luck on your maiden with your new baby. I didnt know that HobbyKIng has Corsair. Interesting... So stay well and see you soon, Robert

Robert my man, you should have shortened the wing spars just a few milimetres and the wings would fit a lot easier! The tail booms fit better if you had just cut a little piece of foam to make more room for the wiring inside.

@PetrincicBrosRC

6 жыл бұрын

Well M, it is like it is. But I really hope for a good maiden flight and some low flybys. Oh yeah... Stay well and see you soon, Robert

спасибо капитан!

Good looking warbird! Too bad you had so many problems with it.Looking forward to the maiden flight.

@PetrincicBrosRC

6 жыл бұрын

Like you said Don. Even with all the problems this baby still looks awesome and I really hope for a good maiden flight and some good low flybys. Be well my friend and see you soon, Robert

I just got my P61 yesterday and Dynam Has NOT changed anything, same gaps same problems. I spent alot of money. I need to get ahold of Dynam...

@PetrincicBrosRC

6 жыл бұрын

Oh yeah? They have good ideas for the planes but the quality is just sick. I will fly mine again as soon as I fix the landing gear but I wouldnt buy any of the plane that I bought from them again. They are just not worth it. But at the end like I always say as long as we have fun. But their planes are not for someone who will have only two or three planes. I really dont know why they dont contact us and gives us the planes to test them first. I really dont know who is doing the reviewes for them and tests. I wish you all the best my friend. But if you will get the bird in the air you will love it. It flyies really well and it looks awesome. But it is different story if you look at it at close. Its the same thing with Gloster EDF. Beautiful plane, but at the end you pay 400$ for just foam becouse all the rest you must change... Big salute to you my friend and greetings from Slovenia, Robert

sounds like a real pain. You did a good job considering! I think ol Captain could do with a zoom lens too.

@PetrincicBrosRC

6 жыл бұрын

It was crazy. Assembley should be joy not the pain. But it is assembled now and I really hope for some good flying and filming. We will zoom this baby at low passes no matter what. We must. For all RC lovers all over the world ;) Stay well and see you soon, Robert

That plane was way too expensive to be so problematic. You really did a great job making it look good

@Timsfpvshow

6 жыл бұрын

That's awesome that you can mill the metal that way..

@PetrincicBrosRC

6 жыл бұрын

Hey Tim. Like you said. In 2017 something like this must just not happen. But the baby does look good now and I really hope for a good maiden flight. Cant wait to see the baby at low passes. Oh yeah... Stay well my friend and see you soon, Robert

I would bore a hole to the back hatch tidy up the wires with velcro. And Black Silicone all the gaps, then fly the snot out of it...Not perfect, but it still looks good...

@PetrincicBrosRC

6 жыл бұрын

Like you said Steve. Not perfect but I hope good enough for some good flights and low flybys. Oh yeah... Be well and see you soon, Robert

just dont fly at night ROBERT OH YEAH

@PetrincicBrosRC

6 жыл бұрын

Like you said Corbin. But this baby does have good navigational lights. I hope that they will work ;) I still hope for a really good maiden flight and some good low flybys. Oh yeah... As soon as I solve the problem with wires. So stay well and see you soon, Robert

You guys are craftsmen. Most Dynam planes are disappointing. I don't buy them anymore because of all the mistakes in them. I hope they are smart enough to watch your channel and maybe see that they have to improve their product. FMS is also losing some of their quality, and better improve or they will start losing sales. It is good that you guys point out the flaws in these kits so the viewers become aware of them . Your channel does an important service for the RC world by educating the public.

@PetrincicBrosRC

6 жыл бұрын

Thanks Richard. We always tell the truth. MAybe becouse of that some people dont like us, but why to lie that something is great if it is not. But I will forgive the Dynam for this if the baby will fly well. I really hope for a good maiden flight with this awesome warbird. Stay well and see you soon, Robert

Hey Pilot Robert,I have seen a couple of different videos on the Dynam P-61 and on some the wings are like yours and on others they have dihedral like the guy was commenting to you a few days ago.I think the quality of the Dynam P-61 is not very consistent.Some of the wings maybe warped a bit and need straightened out.With all of the problems you had doing the build the wings could be off a bit but on the ones that looked more like your wings,they flew really good so maybe you won't have any problems. I am still waiting for Capitan Blaz to zoom the pics on the wall!

@PetrincicBrosRC

6 жыл бұрын

Hey Don. Like you said. I think that they should be like this. And I have puted the reciever in today and I must tell you that I cant wait for the maiden flight. This plane looks so good now with awesome navigational light and all that I cant tell you. And everything works perfectely. If the plane will fly as good as it looks now this will be the plane to buy... Stay well my friend and see you soon, Robert

That is so disappointing guy's , Dynam has really let you down , thanks for sharing , and great lathe work .......

@PetrincicBrosRC

6 жыл бұрын

Oh yeah Scott. But like I said, I will forgive Dynam for this if the baby will fly well. I really hope for a good flight becouse even with all mistakes this plane still looks just awesome... Cheers, Robert

Thanks guys, looks like poor quality from Dynam! Great detail and information in this video. Thanks!!!

@PetrincicBrosRC

6 жыл бұрын

Oh yeah George. The truth and nothing but the truth. We just had to show this to all RC lovers... Be well and see you soon, Robert

Welcome to Dynam :) Sam sem zaključil z Dynam 2 leti nazaj, ker kar oni naredijo je samo za gledat - neuporabno!! Me pa zanima, kako bo letel, lep je ko hudič, samo me skrbi :) Pa velke pohvale, da povesta resnico, svaka čast! LP, Mitja

@PetrincicBrosRC

6 жыл бұрын

Hej Mitja. Kot praviš, kljub vsemu je resnično lep in res upam, da bo v redu letel. Imam še A-10 in Grand Cruiserja od Dynama. Upam, da bosta boljša od tega. Je pa Dusty, ki ga tudi imava čudovito letalo. Zato je zanimivo kaj so razmišljali, ko so dali na trg to letalo. Hvala za obisk pa se vidiva kmalu. Lep pozdrav, Robert

And all the wiring in the battery can be easily stown in the big belly of the plane

@PetrincicBrosRC

6 жыл бұрын

Thanks M. I will try to do that. Cheers, Robert

I think we are looking at this from the wrong angle, with all the mistakes perhaps its only safe to take it out at night, or from 100 yds away,it will only need to touch the wing on landing and it will dissasemble

@PetrincicBrosRC

6 жыл бұрын

Oh yeah S. This will be the first self dissasembley plane ;) But I really hope for some good flying with this great warbird. Cheers, Robert

I hate that guys! Sounds like the meteor story I told you before. I haven't EVER bought Dynam since.

@PetrincicBrosRC

6 жыл бұрын

Well it is like it is. Now I just hope for some good flyimg and low flybys. Oh yeah... Cheers, Robert

Now I know this may sound stupid....BUT are you sure that you have the wings on there correct sides ?? because it looks to me as if you have anhedral on the outer panels (drooping down).I looked at the video of the other model flying and I could not see that.I hope that i am incorrect! Happy Landings Chris...

@shelbyseelbach9568

6 жыл бұрын

britinozoz i believe you are correct, looks like wings are on wrong side, they certainly don't look right.

@shelbyseelbach9568

6 жыл бұрын

britinozoz but thinking about it, i don't see the servos, so they must be on the bottom of the wing. I can only assume this would be correct. Something definitely doesn't look right about the outer wing panels though.

@britinozoz

6 жыл бұрын

Thank's Shelby... Correct sides but something is WAY out !!

@PetrincicBrosRC

6 жыл бұрын

Hey Chris, they are correct. I was wondering the same thing when I assembled them, but then I checked the picture on the box and they are like this. The midle part of the wings is going up and then the outer panels level. Maybe it was like this on original plane or maybe Dynam just screw up this too. Anyway you cant assemble them in any other way. I cant wait to see if this bird can actually fly... Cheers, Robert

@britinozoz

6 жыл бұрын

OK Robert....Even when I look at the T/E of the wing by the aileron (not happy with that) It's just that it makes me think that it may be just a bit twitchy.Good luck with the flight and as always..Happy Landings Chris...

If this model was released ten years ago it would have been acceptable. Just. But companies like Horizon Hobbies (Parkzone, E-FLite etc) have raised the bar leaving Dynam well below the standard we now expect in a foam model. If I had spent 300 dollars on this I would be be VERY disappointed at the appalling fit of parts. And how did those useless decals slip through the net? (Though, being English, it's nice to see it in RAF markings!) Most, if not all, Dynam planes fly well (I have their yellow Tiger Moth and it's brilliant) but if they continue to turn out crap like this they do not deserve to survive. Their quality control is non-existent.

@PetrincicBrosRC

6 жыл бұрын

Like you said Grahame. I really didnt expect something like this in the box in 2017. Planes are getting better and better and then this. Maybe they are trying the best they can but you cant sell something like this to RC lover. But still I really hope for a good maiden flight with this awesome warbird. I just have to solve the problem with wires and then up she goes... Stay well my friend and see you soon, Robert

Its fucked up how the airplane arrived... P for puzzle 😂

@PetrincicBrosRC

6 жыл бұрын

Like you said. And this assembley really looked like I was doing the puzzle ;) Cheers, Robert

I think I would load it with fireworks & fly it one last time & let it go out with a bang oh yeah!!!

Was this a pre production model? That sucks!

@PetrincicBrosRC

6 жыл бұрын

Well it really looked like one. But I really hope for a good maiden flight and some good zooming. Oh yeah... Stay well and see you soon, Robert

I know I wont be buying that plane. Dynam you are starting to drop the ball on this plane. What can you do? If they make a mistake like that will cost them money. Sounds like you had quite the time screwing with that plane.

@PetrincicBrosRC

6 жыл бұрын

Like you said. But today I have puted in the reciever and set the baby and I must tell you that Iam really impressed. Everything works perfectely and the navigational lights are just the cherry on the cake. If this plane will fly as good as it looks now it will really be the plane to buy. The Dynam is fixing this mistakes now and after it will be released again it will be amazing two engine warbird. We will film maiden flight soon and we will see how this baby flyies. Oh yeah... Stay well and see you soon, Robert

This is such a dissapointment, 300$ plane with so many flaws. Dynam should return your money. And as I can see in video, right wing is not straight as the left one. Good luck on maiden flight.

@PetrincicBrosRC

6 жыл бұрын

Hey Gorazd. This plane was the last one in Europe. But like I said, I will forgive Dynam if the baby will fly well. I wonder that very much but we will try no matter what. We must. Oh yeah... Stay well and see you soon, Robert

Junk!

@PetrincicBrosRC

6 жыл бұрын

Well I just hope for some good flying and slow and low flybys. Oh yeah... Cheers, Robert