Nice to see you again Stuart. I am/was a long-time HobbyKing customer. Unfortunately my flying days are over. On May 4, 2021 I suffered a right-side cerebral stroke which paralyzed my left-side. I am slowly recovering but as with any cerebral stroke, where no two are never alike; it's anyone's guess as to what I may get back. Take care of your health - that's the most important thing. You won't know it until you lose it !

Very glad this has returned, and a big thanks for the UK shipping discount. Looking forward to the video 😁

@HobbyKingOfficial

Жыл бұрын

Glad to hear it Robert and thank you for your order. If you could post about how you ordered on some of the community UK facebook pages too that would be a great help in spreading the word.

@scottwells7797

Жыл бұрын

@@HobbyKingOfficial Hi Robert....I used to buy alot of HK planes ...i think the planes are great ...its a disaster that they closed the UK warehouse....i live in uk and saw your post regarding shipping and thought i would also get one as i thought that there was going to be a reasonable discount that would off set the cost of delivery,but the discount hardly covers the cost of the letter u wil recieve from Parcel force £11 for paying the import duty.....The discount HK gives is £17.....the shipping is £48 then add the UK vat including the shipping cost which is 20% of £174 say £34 and the £11 for a wonderfull letter from parcel force...total cost for this plane will be around £219....Beware all UK shoppers!!!!!....Stuart i love your videos but please be as honest with your UK buyers....

So happy this has come back!!! I have 3 of them and will do what I can to add this one to my fleet as well. Thank you Hobbyking!! 🙏🙏

@HobbyKingOfficial

Жыл бұрын

Well its in stock now in Hong Kong Warehouse and we have much improved international shipping rates now so please take a look.

@AussieRCPlayground

Жыл бұрын

@@HobbyKingOfficial one thing you didn't improved is the ESC, these should really come with at least a 50amp ESC. I've had the 40amp tap out after a few full throttle bursts and have had to land "dead stick" more than once as a result. That little 40amp ESC struggles big time on 4S. Might be ok on 3S, but on 4S it definitely runs way too hot and can thermal cutout. My preferred setup is a 60amp ESC and a 7x3 Master Airscrew prop. The bigger prop gives you more torque and basically unlimited climb and you can reach speeds upwards of 200kph on 4S. If it were me, that's how I would've made the V2. 😉

@mach9908

Жыл бұрын

@@HobbyKingOfficial Why don't you consider include maritime transport shipping option?

Nice Stuart. Looking forward to putting some rockets in the back of this one !

Still have V1, been flying it six years and it never gets boring and every flight is a blast! Bought the other two versions red one and the Japanese for backups, but never built them.

I didn't get an earlier Me-163, but I did just order this one. Excited to get it, as I'm also a model rocket guy. Thanks, Stuart, for continuing to bring us new and/or improved warbirds! [Oxotnik, on RCG]

Very nice addition to the Durafly family. This V2 is awesome!! Great job Stuart as always👊🏼👊🏼

@HobbyKingOfficial

Жыл бұрын

Thanks 👍

Looks like a great Me 163B, well done Durafly H King, Jeff in LA USA

Great video again Stuart! Absolutely love this format which is both very informative and a joy to watch.

@HobbyKingOfficial

Жыл бұрын

Many thanks!

Looks great! Hoping to see the BF-110 come out with a V2 now.

Nice video, I does have 2 units of original version 🤭, the red version, and the very early release of the original green army painted version, I like both of these and always a great but enjoyed challenge on takeoff 🤭. Btw, I were flying both of those on 4S 2200mah Love to see this new V2 version, will sue going to buy a unit of it to complete my collection 😂.

Great little plane Stuart! Love it. Quick...

@HobbyKingOfficial

Жыл бұрын

Yes indeed!

Nice Stuart, you just made me take out my Durafly Me-163 again! It was really cool meeting you again in Tongeren unexpected! I'll work on your P-51 vid this week. Greetings*/Geert

Nice you brought out a V2, looks and flys great 👍🏻

@HobbyKingOfficial

Жыл бұрын

Thanks 👍

sweet new plane!!

@HobbyKingOfficial

Жыл бұрын

We think so too!

@dutchloveRC

Жыл бұрын

@@HobbyKingOfficial nice that it has a rudder too

Great video presentation. Well Done Sir.

@HobbyKingOfficial

Жыл бұрын

Thank you kindly!

I have the red version of Durafly with the rocket engine ignition switch and a larger one with a gas engine in GRP from the 80's. The Durafly model flies well and you don't need a bungee cord to launch it. The price you are asking is too much for me , but everyone has to know that for themselves.Meanwhile, I build my own models out of wood again and no longer buy foam models, and if so, then at most used ones.My larger ME 163 was built at the end of the 80s, flown a lot and is still beautiful.That's nice sustainable and cheaper in the long term.

Looks nice HobbyKing!! Great fun at good price. I've never had one, so I may have to get one 👍. Stuart and cameraman (forgot name), great flight and video. AirHammer out!!

@HobbyKingOfficial

Жыл бұрын

Thanks AirHammer, Andries is our cameraman, and a great job he did too of keeping up with this thing!

Its a great plane. One day would love to see a larger one available.

Could the Easter egg be your sons DOB as the tail number 🤔

awesome! always was looking for the original durafly 163 so im definitely picking this up.

Very cool machine. Great video as always Stuart. I would go for the magnetic release so the gear isn't laying out there in the middle of a busy field for someone to run into on landing.

@HobbyKingOfficial

Жыл бұрын

Good call!

Beautiful!

@HobbyKingOfficial

Жыл бұрын

Thank you! Cheers!

@hobbyKing , i still have the Version 1 in red (in one piece, lol). Take off from gras was a 50/50 game. After a handfull flights the right elevator/ aileron got lost and of course the problems that @Aussie RC Playground describes i had too. Durafly has a reasonable quality normally but Version 1 had a couple of issues. Sure i like the new design but waiting for some vids from other KZreadrs if Version 2 will shine or not is the way to go imo. Best regards RC TOM .

Great plane! I still have my original. So fun to fly

@icin4d

Жыл бұрын

Agree. I still fly my V1. And while it's a bear to take off from my field, flying it gives me a different kind of smile watching it scream low and fast runway passes. I've never considered 4s power. Must be getting old. 🤣

@dieselguy62

Жыл бұрын

@@icin4d i tired mine on 4s. The manual shows it rated for it. Honestly not enough more to notice. I started hand launch mine. It was hell taking off from asphalt runway. I have the rocket and it's a cool effect. No real noticeable boost in power but it's a crowd fav at the fly in

I still have a heavily abused V1 that flys great. It's an amazing airframe, one of my favourites. I picked mine up in a sale for under $100. Not sure if I could swallow paying the current amount though, $288AUD+Shipping 😔

Always a fun flyer, and the rocket will absolutely wake up everyone at the flight field.

@vespizzari

Жыл бұрын

Also, great tail #'s

Just checked, no surprise magnet not available

@HobbyKingOfficial

Жыл бұрын

Yes sorry its sold out. But as you can see on the ETA on the page for this optional part, its due back in by end of October so please check back again soon.

I did the tailwheel mod to my older one, it's almost needed on hard surfaces to help keep it straight.

my lads just got me one 4 xmas

Hello. I am going to guess the special edition to the marking scheme is the squadron insignia of Squadron 2./J400 a Komet Me163 unit. The insignia says "Like a Flea, but Oho!" translated to English from German. The "Oho" means it is much worse than a fleas bite. It portrays a flea flying through the air with rocket exhaust coming from its rear end. I think your son likes the Flaming Flea! This is a reference to the springing into action at high speed to harass allied bombers like fleas harassing a dog. This quick response and high speed attack was supposed to be an advantage for the Me 163. Let me know if I am correct. Thanks Ed

Bravo

Looks a lot of fun I guess it's an expert plane only flown 400mm with safe so far . Warbirds. Volatex & Echine.

We would all like to see that rocket and magnetic dolly uptional upgrade in action...

Nice. I'd buy one of these. Is the egg the shield sticker?

@HobbyKingOfficial

Жыл бұрын

Its not, that's a scale unit marking actually. But the egg has been found by another already (DoB on the tail).

Any chance of the skysword 70mm pink v2 with upgraded trailing link nose and inrunner edf ??

How did you manage to have no throttle when you were doing safety check as you did not appear to have disconnected the battery ?

@HobbyKingOfficial

Жыл бұрын

Stuart had 'throttle cut' programmed in on his radio.

Great flying plane, but Hobby King is constantly out of stock on all replacement parts for this Me-163, now my ME-163 sits on a shelf, since the motor it came with burned out after 5 flights, and no replacements are ever in stock

No battery straps?🤦🏾‍♂️ How is the battery supposed to hold on in place during high G maneuvers?

@HobbyKingOfficial

Жыл бұрын

With the velcro provided. Note that the battery now slides under the wing spar and is held firmly in place. Don't worry its firmly in place and secure.

Is the only difference from the v1 version is the dolly? The tail gear is also visible.

Two questions. How well does it hand launch. and are there any suggestions for wing tip skid protectors. Some of us will be landing on pavement. Let me know please. THANKS.

@HobbyKingOfficial

Жыл бұрын

Hand launch is possible, but ROG is recommended. On the underside of the wing there is raised foam bumps at the tips that give some degree of tip skids. These could be further enhanced by adding clear tape covering them. Additionally some small slots can be cut in raised foam vertically for some clear plastic skids to be glued in. Would be a worthwhile mod if you are only flying from hard surfaces.

@HermyH66

Жыл бұрын

I have hand launched my ME163 V1 on 3s a few times, that works as long as there is some wind. On 4S it should be even easier.

is this a sneak peak of a upcoming rumpler taube? in the slow flyer cameo ?

I'm gonna guess the easter egg is the tail number is your sons birthday?

@HobbyKingOfficial

Жыл бұрын

Correct, but unfortunately you were not the first to guess it. We'll have to make it harder next time!

It's very fast. Is it a basic PNP with 3 cells?

Quiero uno!

Can you hand launch it?

Couldn’t you hand launch this model too?

Handlaunch-able?

Easter Egg? Your Son's B-Day hidden within the tail code? April 12th, 2015?

YA SOUND LIKE A FAMOUS D.J. (WESTWOOD)

Bought this model, first flight motor mount screws came undone and the motor fell off. This is a factory fitted motor! Warranty claim rejected as the model is 'crashed'. It crashed because the motor fell off due to poor manufacture, I didnt have a hand in fitting the motor, the manufacturer did!!! Absolutely shocking customer service. First and only Hobbyking purchase