Hey bro after using 14 teeth front sprocket did you noticed any difference? Has the ride quality improved? What about Jerkiness in slow speed ? Is that removed ?? Please reply

@gopalkrishnaambig5791

6 ай бұрын

Not

thanks, ver helpfull for my data acceleration

@RevRides

2 жыл бұрын

Cheers dude ❤️. Im happy that my video helped you ❤️❤️ Do subscribe and share ❤️

Hi bro, i want asking now i using duke 250 2017 and the problem is, that time i go change sprocket set rear and front but that shop no stocks of size 46 then he tell me.. them only got 44, then i ask them back will got side affects or not to engine.. them say no..

@azalisyafiqaofficial5638

2 жыл бұрын

But just now i wash my bike.. i see the size not 44, but is 43, and front sprocket is 15Z

@azalisyafiqaofficial5638

2 жыл бұрын

And that will got affected to engine or not..

@RevRides

2 жыл бұрын

It wont affect on engine. Im using 250 front sprocket on my duke 390 since a year. I can see improvement on mileage and acceleration as well

Excellent video thanks for video

Am planning to change it to 14T... Great info.. thanks

THANKS

So whats the best sprocket to use for Duke 390 bro,Front and Rear for best performance to improve acceleration?

@RevRides

2 жыл бұрын

I would suggest if u some extra cash. Go for Piggyback Ecu , its the best upgrade for performance. ( Note - Cant expect more engine life on this). Upgrading rear sprocket also a better choice but still it will cost you some where btw 3.5k to 6k. Upgrading front sprocket is budget friendly, you will get it for under 300rs and Initial power increases and gears will short as a result decrease in top speed and if you Cruze at 100 - 110 , excellent average of 32-34kmpl. Hope this helps you. Do subscribe and share ❤️

@kartikwondo6690

Жыл бұрын

@@RevRides where do you buy sprockets seperately

@rvaidy51

Жыл бұрын

Have you done 120 to 130 with dront sprocket change? How does it perform in 1st and 2nd gear?

Which front sprocket better for wheelie..13t or 14t bro

@RevRides

2 жыл бұрын

For wheelie we need more initial torque. 13t will be the best option. I suggest keep front sprocket as stock and upgrade rear sprocket with bigger one like 47t or 49t. Upgrading rear one with bigger sprocket you will get more torque compared to front one. Its like 1:2 ratio. Stock front is 15t and rear is 47t so U need to upgrade to 49t with 15t and ,47t is ok with 14t. Hope this information helps you ❤️ Do subscribe and share ❤️❤️

@karmakencho4622

2 жыл бұрын

Thank u brother..

@Mugeshathlete_46

3 ай бұрын

Brother I have duke 250 I planed to change front sprocket 14 - 15 teeth sprocket but it's increase pull or top speed

@greenblue980

2 ай бұрын

​@@RevRides thanks for this!

good video bro. You recommend 48t rear than 14t front for better torque, Can i ask why?

@jeremyst.george6711

Жыл бұрын

Small front and lager rear lowers your final drive ratio making the bike feel more powerful, while lowering it's top speed.

Is this 14T sprocket the same part from Duke200?

@bamboostick5

2 ай бұрын

Duke 250

Bro can i used in mt15

@RevRides

Жыл бұрын

Im not sure for MT15 bro. Do subscribe and share ❤️

I guess 390s will go from 0 to 100kmph under 6 sec right ? This took almost 7 to 8 secs....either a heavy rider or a slow launch ! The video was great tho !

@RevRides

3 жыл бұрын

Yes ur right Bt i think launch is slow , need to practice that. I will improve. Thanks ♥️ Do subscribe and share ♥️

@boxingchamp630

3 жыл бұрын

@@RevRides sure bro did ✌ keep doing good content

@pedroplatzerdamotta

3 жыл бұрын

@@RevRides Make sure to change the gears before the red line. You will gain a feel milliseconds

@Samarth916

Жыл бұрын

With undergearing, you need more gearshifts to reach 100 kmph, around 3 to 4 shifts, vs 2 gearshifts on stock setup. Gearshifts always cost you time. So, undergearing always doesn't give better 0-100. 0-60 it might give better...

@boxingchamp630

Жыл бұрын

@@Samarth916 it can be negated with quick shifter to an extent tho..!! But yes.. A smaller rear sprocket will get the job done

I want 15 t and 13 T plz

@RevRides

3 жыл бұрын

15t comes stock with duke 390 nd Adv 3900 nd rc 390. 14t comes stock with Duke 250. 13t is too low , it may harm engine , It will change Gear Ratio. Hope it helped you ❤️ Do subscribe and share 🤗❤️

@ramwax

2 жыл бұрын

@@RevRides bro where should I get 13t sporket?

Same i am planning to change, but worried about mileage, i heard that it will reduce.. 😭 How much mileage ur getting bro???

@RevRides

3 жыл бұрын

Properly I dint calculate. But on dash its showing around 25-26 kmpl on city and 30-32 kmpl on highway. But one con is that engine rev up fast compared to stock. Hope you got some idea. Do subscribe and share ♥️

@catal7504

3 жыл бұрын

Mileage will be less. I tried it already . Your engine is revving around 7k always.. you will get 23km/ltr

15T sprocket. From where we can buy it?

@RevRides

3 жыл бұрын

15T Sprocket is duke 390's stock sprocket. You can get in any in KTM service center and cost around 200rs. Do subscribe and share ❤️

@ajaykrishna9044

3 жыл бұрын

Bro can we fit 390s 15t in duke 200?

@harelildis8515

2 жыл бұрын

@@ajaykrishna9044 No, their size is different

Will 15t harm duke 250 bs6 ??

@RevRides

2 жыл бұрын

Its not harmful for engine or for clutch or for gearbox. But you will miss that Initial Torque on 15t. And You Cant ride Slow in higher gears. Hope this info helps you ❤️. Do subscribe and share ❤️

in first 0-130 u started late

@RevRides

3 жыл бұрын

Yes a bit. Thanks for the comment, I ll improve that. Do subscribe and share ♥️

@kushgowda7240

3 жыл бұрын

bro i am planning to buy rc 200 bs6 wt should i do

@RevRides

3 жыл бұрын

@@kushgowda7240 I Suggest you to go for Duke 250 , its powerfull then RC 200 and comfortable too. Take a test ride of both and decide.

@kushgowda7240

3 жыл бұрын

tq beo

@kushgowda7240

3 жыл бұрын

bro

Bro i need 15 teeh where to buy

@RevRides

11 ай бұрын

You will get 15 teeth sprocket in duke 390 as stock.