No video
DUCATI 848/1098/1198 easy and fast cambelt change , only used a crankshaft tool.
also used a microphone for the hertz measuring for the cambelts.
always follow the specs of the manual.
before setting the cambelts to specs rotate the engine a couple of times. so the belt finds its way. now set it to spec tension about 100 to 110 hertz .
rotate the engine again a couple of times and see if its still in specs. by rotating it may vary a bit , but as long its within specs dont worry.
Пікірлер: 41
thank you
nice video Dad..! how do you measure the hertz? do you touch the belts, like a guitar string, so they can generate a wave? sorry about my ignorance on this, but I´m about to replace my belts. thank you ...!
@TheGrimmReaper1
2 жыл бұрын
Exactly. Play it like a guitar
Without the tool to free the cams pulleys I think you may get a different tension in between them compared to the tension between the crankshaft and them 😢
@TheGrimmReaper1
Жыл бұрын
And how would that? Cause you measure after rotating with a hertz meter. And every rotation you will measure a lower or more hertz. As long as it is between 100 and 110 hz
@thelensguy6050
Жыл бұрын
@@TheGrimmReaper1 well, think about it, the wheels have teeth, so does the belt, so the tension will differ if the wheels are fixed, no matter how much you tension the belt, between the cam wheels you will have fixed different tension because of the teeth, if the wheels are free, they can even out when you rotate the engine, they wouldn't go to so much trouble allowing you to have the cam wheels free while fixing the cams, to me it makes perfect sense
@TheGrimmReaper1
Жыл бұрын
What do you mean with freeing the camshaft pulleys? I hope not the 3 bolts of the camshaft .
This is an amazingly helpful video thank you...crank tool was really necessary?
@TheGrimmReaper1
2 жыл бұрын
To be on the save side yes. But i can do it also without the cranktool. As long as you mark them like i showed. There is absolute no problem. If the markings are on the same spot while taking the old of and placing the new ones. You are good to go. 😁😁
Thanks for the video, quick question. Did you take out the plugs or just put in 6th gear and use the tire to rotate the engine?
@TheGrimmReaper1
Жыл бұрын
Both ways are possible. I did it in 6th but without plugs its easier!
Hello, Can you please let me know microphone did you used and what application on your laptop?
@TheGrimmReaper1
2 жыл бұрын
The program i use is from jp diag. Search it and download it. Microphone i use is specialy for mhz . But any good microphone will do, even a program for mhz measurement on your mobile works. With the build in mic from your phone. Hope it helps you. Below the link. jpdiag.akress.com/
Hey Ducati dad vraagje die krukas tool is die egt nodig ? Ik heb deze niet bij mijn m900 had ik het niet nodig kan de 848 ook zonder ?
@TheGrimmReaper1
2 жыл бұрын
Neehoor heb je niet nodig. Als je timing as maar op tdc staat. En je de camshafts gemerkt hebt geen probleem. 😁
do you have the reding to in put to tensioner tester tool Mass Span and Width? thanks
@TheGrimmReaper1
Ай бұрын
Those bikes are set with hertz. Easy to do even with hertz meter on your phone. . Tension tester is not used with 848/1098/1198.
Well done, and dealers charge how much?? I just bought an 1198sp with 15k on it so belts and valve adjustment is my next project. Appreciate your video.
@TheGrimmReaper1
2 жыл бұрын
Thx 😁 price here for a belt change about 450 and 650 euro. . As a former car mechanic i did it myself. On the easiest way i could think of. used oem ducati belts about 80 euro per belt. I used oem because of the tension in hz . As i wrote between 100 and 110 hz. When fitted rotate a view times and measure again. Of it stays within 100 and 110 hz youre good to go for a view years.
Cam locking tools?
@TheGrimmReaper1
Жыл бұрын
Not used. No point in doing that. Waiste of money. Basicly you can change the belt without the tools. Just mark them out. Camshaft timing i only do when i removed the camshafts or place new camshafts to time them with the special tools. When they are timed previous with new belts . There is no point on doing it again when changing the belt. Timing wise nothing has changed!!
what is the angle that you left example the horizontal cylinder is at 3 o'clock and the vertical for the video you left in 5 hours approximately that's it, Thanks, I have a 848 year 2010 and I'm having trouble getting it right
Awesome video. Is there a way to check if all is good timing before turning the bike on? Like spinning the wheel or turning the crank manually? Thanks
@TheGrimmReaper1
Жыл бұрын
When you have marked the camshafts and crankshaft before you took the old belts of. And everything comes back on the markings after manually turning the engine( put it in 5 or 6 gear and turn the wheel. ). What you already did when checking if the hz of the belts stay between 100 an 110. Then ot runs like before. 😁
@FranciscoGalicia
Жыл бұрын
@@TheGrimmReaper1 thanks so much. I did that of the marks. Then measure the Hz at 90+/-5 as it is a 1262 and that is what the book say. Then I turned the crank several times and all good. Now the marks are everywhere and the tension change depending on the angle. I will do the 5th or 6th gear to rotate it easier and just keep checking all is good. Best regards. What is your Facebook?
@TheGrimmReaper1
Жыл бұрын
facebook.com/ronald.stam.58
@FranciscoGalicia
Жыл бұрын
Hi. Is safe to say that if the motor spins freely is time ok? I just want to make sure . I rotated the motor manually several times and good. Next is to start it. Thanks
@TheGrimmReaper1
Жыл бұрын
@@FranciscoGalicia yes if it turns freely. And its getting back on its marks . You can start it and it will run
Wie hast du das gemessen? Mit was kann man das als Laie machen?
@TheGrimmReaper1
2 жыл бұрын
My german isnt that good . Explain Laie machen. Machen i know but Laie?? Beats me.
@TheGrimmReaper1
2 жыл бұрын
Aha figured that out. If you follow the video its possible even for a noob to do it. Not point in marking the belts . Just mark the camschafts as shown. And the timingshaft as shown. Before you remove the belts. . Put new belts on and make sure the markings you have set are the same as you have taken them of. . Only thing to do then is use a hertz app on your mobile phone ans set the tension of the belts to 100 to 110 hertz not lower and not higher. Everthing in between is just fine. Good luck 😁😁😁
@JannisLAA
2 жыл бұрын
@@TheGrimmReaper1 man I’m sorry I thought you were German 😂 I don’t know why but it seemed to me like you were one of my Sith 🫡 Thanks for the quick response. I’ll do my best to make it work. If it’s not working I need a new bike I guess 🫣
@TheGrimmReaper1
2 жыл бұрын
@@JannisLAA you can always reach me thru facebook messenger. . When ypi get stuck or dont trust it. Contact me. Np.
@JannisLAA
2 жыл бұрын
@@TheGrimmReaper1 thanks for the offer but I’m not into Facebook neither instagram. I’ll just get back at you on KZread
I really cannot see the point in these speeded up videos. People want to learn how to do these jobs properly. No way could this be useful to anyone about to tackle this job on their bike
@TheGrimmReaper1
2 жыл бұрын
If you have the slightest idea of timing you do. If not dont touch it. Really bad idea. Btw it shows the markings . And, hey pausing might help. I can make a hour long video if you want. Lolzss 😁😆😁
@CORZER0
2 жыл бұрын
I actually seek out sped-up vids like this. I don't need an hour to learn something I can figure out myself for the most part if I can just see it done.
@stuartberrie7334
Жыл бұрын
I agree with Ducati Dad. I spent a lot of time researching mis information and the positive stories like this are what build confidence in tackling a job like this on your own. It might not be the premium 100% proven method but it will work for the 99% without all the ducati special tools, and providing timing on cam sprockets was previously near perfect or little wear.