No video

DRZ400SM K&N Air Filter Install!

Пікірлер: 45

  • @joshwatts6287
    @joshwatts6287Ай бұрын

    I did a No Toil filter and man I couldn't wash that filter grease off even with gas lol, stuff is stiiiiicky!!! I agree about the exhaust having the largest impact on all around performance, from low speed cruisin in a higher gear to off the line take offs, night/day! I went with the Yoshi carbon system, it was a tough trigger to pull but after 10 miles worth of riding even without the jet kit installed I can honestly say MONEY WELL SPENT, I'm sure yours was the same way!

  • @linksgarage1985

    @linksgarage1985

    Ай бұрын

    Hell yea. Jet it and it’ll be a different machine!

  • @hpd6881
    @hpd68812 жыл бұрын

    Did you notice a decent boost in performance after all the mods? I just picked up a 2022 DRZ. Thanks, Jared. Keep up the great work and videos.

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    First of all thank you! I appreciate it! And the filter, not so much. The biggest difference came in the jet kit and the exhaust. Completely different bike after that.

  • @elis51501
    @elis515019 ай бұрын

    Just received the same air filter:)

  • @linksgarage1985

    @linksgarage1985

    9 ай бұрын

    Sweet!

  • @GODSWORD11
    @GODSWORD116 ай бұрын

    Thanks once again for the informative video, helping people like me do these installs that would normally cost me hundreds of dollars altogether. I’m doing my Barkers exhaust, 3*3 (or 1*3) and k&n filter myself, maybe tomorrow if it’s warm enough out. All thanks to you, bro. I’m probably not going to attempt the jet kit. I’m not confident enough in my mechanical abilities or lack thereof. Do you think it would be okay to run it a few hundred miles w mentioned mods w/o jetting? Thanks again, man. Shop here is $165/hr. They want an hour for exhaust alone!!!! You’re seriously a life saver.

  • @linksgarage1985

    @linksgarage1985

    6 ай бұрын

    All good brother. Yea you could run it without the jet kit. It will run lean though. It will have all the air, and exhaust, but no fuel. Shouldn’t kill anything. As long as it’s very limited. Good luck dude!

  • @GODSWORD11

    @GODSWORD11

    6 ай бұрын

    @@linksgarage1985 thanks again man!!

  • @blanemccurdy566
    @blanemccurdy5662 жыл бұрын

    Show us a video of the Tusk stand and a link! Having a 21 drz I like watching your videos and I used your rejetting video great content!

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    Hell yea! Thanks man! I have some more videos filmed and ready to go. The bike changes a lot!

  • @CraigSmith568
    @CraigSmith5682 жыл бұрын

    My 22 model just hit 200 miles and I already had one of the axle sliders fall off and one of the bar ends fall off. Not a big deal since I'm putting on hand guards and different sliders, but it is disappointing. Love the bike so far though. Mine is the white instead of the black though.

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    Keep in mind, this is. It a Suzuki problem. These bikes come disassembled. So those items that fell off, are installed by the dealer. That’s a dealer problem, not a Suzuki problem.

  • @CraigSmith568

    @CraigSmith568

    2 жыл бұрын

    @@linksgarage1985 Yea, I don't blame Suzuki, at least for the bar end. The axle slider is another thing. It actually bounced up and hit me on the shin so I was able to get it. Tried to reinstall it and it won't tighten up any more. It is a bad design. May actually be made by someone other than Suzuki though. Works similar to a bar end except it is a rubber piece that swells up to hold it. Has a spacer to keep from overtightening it, but it doesn't allow you to tighten it enough. Not a big deal for me since I'm replacing both items though. I'm sure my dealer would work to fix it if I asked.

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    @@CraigSmith568 my 2022 didn’t even come with the sliders.

  • @liampariso2143

    @liampariso2143

    2 жыл бұрын

    One of my bar ends fell off really fast as well

  • @Bobsadventures58
    @Bobsadventures58 Жыл бұрын

    How does that air filter clean up? Make a video on that. I've only used twin air filters on dirt bike so wasn't sure. Thanks.

  • @EscapePlanSkateboarding
    @EscapePlanSkateboarding Жыл бұрын

    Does your filter fit snug around or kinda has some wiggle room?

  • @linksgarage1985

    @linksgarage1985

    Жыл бұрын

    Pretty snug. Minimal wiggle. Thanks for watching I appreciate it!

  • @sujeewajayanath2364
    @sujeewajayanath236411 ай бұрын

    Great vedio. Thanks bro

  • @linksgarage1985

    @linksgarage1985

    11 ай бұрын

    No problem. Thanks for watching I appreciate it.

  • @JeanFrancoisDufour-bp5si
    @JeanFrancoisDufour-bp5si Жыл бұрын

    Nice video thanks !

  • @linksgarage1985

    @linksgarage1985

    Жыл бұрын

    Thank you! I appreciate you watching!

  • @flipmafioso1851
    @flipmafioso18517 ай бұрын

    Whats good 👍 ,,,,do i have to oil the filter because I've seen videos where some did oil it But u didn't...

  • @linksgarage1985

    @linksgarage1985

    7 ай бұрын

    Follow the manufacturers instructions. If it calls for it, do it. Or it doesn’t, don’t. A lot of k&ns come pre oiled. But you have to the oil after cleaning.

  • @flipmafioso1851

    @flipmafioso1851

    7 ай бұрын

    @@linksgarage1985 thanks bro👍

  • @Auto-Minute
    @Auto-Minute2 жыл бұрын

    I did this mod 10 years ago and it's crazy seeing this again on a 2022 model year haha oh Suzuki. It's a great lil mod especially since you already have the bike jetted. I can't say I noticed a performance difference, but it was nice knowing the bike was "breathing" a little better :) Did you end up futzing around with the air/fuel mixture after these mods?

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    I did not. I didn’t notice any difference. So I left it alone. Thanks for watching I appreciate it!

  • @napper1496
    @napper14969 ай бұрын

    K&n are not as good as you would think. Bmc have a bit better flow. On my r6 and r1 the stock paper filter actually did better than the k&n. A university graduate did a study on flow and bmc came top of the list,then stock then k&n. Unreal eh

  • @nickjordan7095
    @nickjordan70952 жыл бұрын

    Have you had an issue with the plastics getting dull and losing their semi shine? I can’t decide if I’m buying the white one or the black one

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    Nope. My stuff looks good. Then again, it’s a 22. White looks awesome 2.

  • @goshacroitor8805
    @goshacroitor88052 жыл бұрын

    Would you recommend a re-jetting with the KN air filter for the DRZ? I already have the JD Jetting, and 3x3 mod.

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    Well, I’ve ridden about 200 miles since the filter, and I don’t really notice a difference. I don’t think a rejet is necessary. Just my opinion

  • @187_Hannibal
    @187_Hannibal Жыл бұрын

    Great video! If I changed the filter and took out the snorkel do you think I’d still have to rejet?

  • @linksgarage1985

    @linksgarage1985

    Жыл бұрын

    You could try it. Is the exhaust stock?

  • @187_Hannibal

    @187_Hannibal

    Жыл бұрын

    @@linksgarage1985 yoshi exhaust my issue is when it’s in first with clutch fully engaged the bike lurches and if I tap my foot brake the engine stalls

  • @linksgarage1985

    @linksgarage1985

    Жыл бұрын

    @@187_Hannibal I should have asked this first. Have you jetted it at all yet? If not, yes, it needs to be rejetted. Especially with a full exhaust and the air filter.

  • @liampariso2143
    @liampariso21432 жыл бұрын

    Do you have to tune these bikes after all these parts

  • @linksgarage1985

    @linksgarage1985

    2 жыл бұрын

    Jetted, exhaust, and airbox mod.

  • @moisesalfonso1619
    @moisesalfonso1619 Жыл бұрын

    you need bigger bike my bro

  • @linksgarage1985

    @linksgarage1985

    Жыл бұрын

    I’ve had bigger ones. I like this one. Thanks for watching!

  • @pucknhusker9426

    @pucknhusker9426

    8 ай бұрын

    Why?

  • @GODSWORD11

    @GODSWORD11

    6 ай бұрын

    @@pucknhusker9426 if you’ve never ridden a super moto, you probably don’t get it. I’ve had over 30 bikes, all rockets and Harleys before my ‘24 DRZ400SM. This IS the funnest bike I’ve ever been on. Super Moto life is where it’s at.

  • @pucknhusker9426

    @pucknhusker9426

    6 ай бұрын

    Think you replied to wrong guy, im the same had other bikes and sumo is the only bike i need mow. I was asking the guy why you need a bigger bike.@@GODSWORD11

  • @GODSWORD11

    @GODSWORD11

    6 ай бұрын

    @@pucknhusker9426 oh I gotcha bro, my bad