Good review, thanks.

@RichManPoorTech

3 жыл бұрын

Thanks for the comment, I glad you liked it

Here is a 30 min trick that takes this sander to a whole new level 1.Remove sanding disc. 2.Apply a MIRKA sanding disc to it matching up the few holes . 3.NOW !!!! using a 10mm drill bit. drill through all the holes in the Mirka disc .Or just map out rings of holes etc Re fit disc to machine 4.The machine now will be able to use Abranet etc sanding sheets and have 4 times the level of dust extraction.

@RichManPoorTech

2 жыл бұрын

thanks for the comment

@Naughty_Squad

Жыл бұрын

You can drill holes like that in any sandpaper, but have to watch out sometimes the drilled holes leave a mark as soon as you start to sand.

@carforumwanker

Жыл бұрын

@@Naughty_Squad learn to read you tomato No one said drill the paper . You only drill the head . To allow a better paper to be used . You one of Joe Bidens kids ?

@jessejameson154

4 ай бұрын

I have a 5 second way of improving the evolution sander. : 1. Take sander and throw in recycling pile. With any luck it will be recycled into a tool that isn't the biggest waste of time ever manufactured. Even if it gets melted down into a plastic container....it will still be 400 million times more useful than the disaster of a tool that it is.

@carforumwanker

4 ай бұрын

There is nothing wrong with it for the money @@jessejameson154

What grit sand paper did you use

Cheers mate. Even for one large room, I'd buy that tool at the Screwfix price - and sell it on after. Got a freshly plasterboarded large area to tape and joint - been looking for a low dust method of sanding.

@RichManPoorTech

2 жыл бұрын

They are more useful for tape and joint, but I didn’t have any to film at time, that’s why I showed on filling where electrics were moved, a good tool to have in your arsenal thank you for your comment

Am from Kenya can get the machine

Wonder if anyone could help me, build my garden bar about a year ago, I painted it to quick before the plaster had dried properly now all the paint is peeling off! I know I'm going to have to sand it all but what I want to know is will I have to do the half white half water coat first or can I just paint it the colour I was going to? I'm an idiot I know! 🤪

@RichManPoorTech

Жыл бұрын

i presume when you say plaster you mean render otherwise you will continue to have problems, just clean off and apply a good quality masonary paint, check the paint for any prep needed

If you put halogen 500 watts or any other source of light beam directly on the wall or ceiling - does it really look perfect or still needs some little corrections here and there (before or after painting)?

@RichManPoorTech

3 жыл бұрын

I would say it all depends on the wall quality to start with, on this wall shown is was skimmed plasterboard originally, the electrical work was done and filled, and those paint ridges all sanded, I’m a perfectionist and the smallest imperfections annoy the hell out of.me, the wall is lit with Philips hue lights that would also show imperfections and there is no difference than a new build wall, however I did spend my time making sure the prep was done right, hope this helps

@5084204

3 жыл бұрын

@@RichManPoorTech It does immensely. Thank you.I was tackling Artex removal: scraped about half of its height, primed and applied gypsum type finish. As it is a lot of sanding and dirt when doing it manually - I decided to ..Evol..utionise the job.

@5084204

3 жыл бұрын

@@RichManPoorTech I did it! I must admit that the surface looks absolutely smashing! Thank you for the review that really aided the decision to purchase it. My few comments: 1. the tool is heavy and sanding 30m2 of ceilings really doest take its toll on the wimp like me. 2. the tool comes with a few sanding discs, replacements are inexpensive on Amazon (about £20 for a box of thirty pads of various density (www.amazon.co.uk/gp/product/B08R645S78/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) 3. Con - suction design is very, very inefficient. I have connected the sander to my Karcher WD2 and it was a drama: gypsum particles just stayed in the guard. Each time I lowered the tool - a huge amount of gypsum was coming out. 4. Tool looks of good quality, but ... my swivelling head guard is very loose. It is attached with the four screws to the aluminium body, tighten well, but it is still loose - you can see the nearly 2mm play on the screws if you move the guard. 5. It looks like, the guard with brushes was designed to have removable about a quarter of its circumference (to aid in sanding the corners), but you will not be able to take it off without breaking the acrylic. Overall? This tool does the job.

Hi there, question I’m hoping you can assist with. So I have a similar drywall sander. I’ve recently been using it on previously painted walls to get them nice and flat and smooth. Ended up using 80grit as another higher was taking forever! Worked up to the highest speed and slowly but surely it’s getting the millions of little divots out but in the process of the higher speed and 80grit it’s kind of polish the surface and I’m worried the first top coat wonder stick! I’ve done another pass with the same 80grit (tried 150grit too) on the lowest speed hoping it’ll re-Roughen up the surface with a fresh key but it doesn’t seem to be working! Just keeps polishing it almost. Any advice on any of the above?

@RichManPoorTech

11 ай бұрын

When i did the wall your looking at it was smooth like marble, i wiped over with a slightly damp cloth to remove any dust, waited until thoroughly dry approx 1hr from starting to wipe clean and then rollered dulux emulsion straight on and did the panel wall as in the thumbnail and other vid again using dulux emulsion. This was about 2 years ago no sign of paint coming off, and wall has been wipe in a few places

@richardrobinson7645

11 ай бұрын

Use a 60 or 40 grit?

@antb3334

11 ай бұрын

@@richardrobinson7645 wouldn’t go above 80 for a smooth finish

Thanks 😊 nice review 👍 Do you have the link we're I can purchase. Thanks again.

@RichManPoorTech

2 жыл бұрын

Hi the link is in the description as always but here is the link Evolution R225DWS amzn.to/3tAPoty

Does it include a dustbag? Is a vacuum cleaner necessary for attachment? Thanks in advance.

@RichManPoorTech

2 жыл бұрын

it dose not include a dust bag, vacuum cleaner is for collecting dust, it will work without the vacuum cleaner but you will have more dust

What vacuum will it fit. And I didn't hear vac on so is it switched off.

@RichManPoorTech

Ай бұрын

It should fit a universal shop vac, in not you can get universal adapters. I used a Karcher or Kärcher WD3p wet and dry vac in the video but make sure it has the paper dust collection bag fitted, I use it now with a Festool dust extractor as it has a alarm if its getting clogged. if on a large site then that complies with H&S but both work fine

Thanks for the video mate, Do you know if that plugs into a Henry hoover?

@RichManPoorTech

2 жыл бұрын

it is pretty universal fit, and i use them on 3 different vacuums without problems, if it didn't fit then the are rubber reducers that can be purchased from most diy shops for connecting power tools to vacuums, but as i don't have a Henry i can comment for sure, if your doing a lot of this then you may want to look at adding a cyclonic dust extractor you can make one yourself look at this video from Charlie diyte kzread.info/dash/bejne/iadrttJrgcrIn5c.html

@arnaudbouchot9620

2 жыл бұрын

@@RichManPoorTech I went ahead and bought the Sander, I can confirm it won't fit my Henry hoover but strong duck tape is doing the trick just fine. Thanks again for your time and video.

@RichManPoorTech

2 жыл бұрын

@@arnaudbouchot9620 you can buy these tool adapters for a few £'s they are made from tubber and push on, you can cut to desired size if need be amzn.to/3v3eQLH

How does the hose connect to the karcher hose?

@RichManPoorTech

Жыл бұрын

From memory it pushes in then you tighten a collar

Can it be used for buffing tiles?

@RichManPoorTech

5 ай бұрын

I would use a dedicated buffer for tiles

I want one like it, where can I get it and how much is it?

@RichManPoorTech

2 жыл бұрын

you can find them on amazon amzn.to/395AB5M and other diy tool retailers currently £149

Which company invented the dry wall sanding machine

@solarmagister

5 ай бұрын

Flex ;)

Does the hose go into a bag, or a vacuum?

@RichManPoorTech

2 жыл бұрын

as shown in the video i have it into my karcher vac

What would you do if there is a massive bow In your wall?

@RichManPoorTech

2 жыл бұрын

if it is a massive bow i would get the wall re-plastered

Pls How much is this sander

@RichManPoorTech

3 жыл бұрын

here is a link to the latest prices Evolution R225DWS amzn.to/3tAPoty

Donde la puedo comprar

@RichManPoorTech

2 жыл бұрын

por lo general, se pueden encontrar en línea como amazon, y en tiendas de herramientas de construcción más grandes

@Laurel-503-drywall

2 жыл бұрын

@@RichManPoorTech Amazon no la tiene y me gustaría comprarla porque tengo una similar y seve vien esa y muchas gracias

hi would this be good for artex ceilings

@RichManPoorTech

2 жыл бұрын

i haven't tried it myself yet, i will be later on on a full property renovation that i am due to start anytime waiting for a sale to go through

@mozki1

Жыл бұрын

If its proper old Artex it should not be sanded as contains asbestos

كام السعر

@RichManPoorTech

2 жыл бұрын

لدي رابط للأسعار في الوصف في الوقت الحالي ، فهي تقارب 149 جنيهًا إسترلينيًا

I bought but I'm disappointed. Ceiling sanding is a nightmare due to electric motor that make the sander unstable when moving

This is the worst drywall sander on the market. Drywall Sanders are generally rubbish anyway, and are a complete faff, but this one even more so. It's too far too heavy for overhead work. The on/off switch is so annoying and awkward to use that it will test your patience not to smash the tool in two halves over your knee. The corrugated hose holds all that lovely fine plaster dust in its grooves.....so as soon as you disconnect it , it will cover the floor with the dust you tried so hard to avoid. In fact the hose will annoy you and hinder your progress in every way because of the way it's connected. It feels awkward to grip , to hold, and to work......badly weighted. I did one room with mine from new , then sold it for a fraction of what I paid for it....just to get it out of my sight ( if it didn't sell I was going to give it away free to someone regardless).

@slippyg

5 ай бұрын

Actually you're right it's bloody heavy as