His aunt did an amazing job on the seats!

@WillometMotorFab

3 жыл бұрын

No doubt!

Beautiful Chevy Pick up .....nice work ! Thanks for sharing ....love from Germany

@WillometMotorFab

2 жыл бұрын

Glad you enjoy it! Thank you.

Had I not known the Cummins was never an option in that truck I would have assumed it's factory. So clean, the winch is slick too. I love how well thought out this build is.

@WillometMotorFab

4 жыл бұрын

Oh yeah, super clean. He did a really nice job.

What a great guy and so young! AND...what a great guy!

A dream vehicle of mine is an M1028 that looks mostly stock with maybe an early generation Duramax. Or even a Dodge M880 with a 12V Cummins. Anyway, this is a beautiful build top to bottom and I love the M81 Woodland seat covers!

OMG... It's beautiful. (with tears coming down my eyes)

The bored when you're done I've had that feeling .love the square body GM's . Beautiful Rig .

@WillometMotorFab

3 жыл бұрын

Dave did a good job on this. Real clean.

Love seeing Gambino's Cummins-powered square

@WillometMotorFab

4 жыл бұрын

It's a looker, for sure.

Dream truck

Thanks Dave for the help and info, bought my ox locker with his help.

@WillometMotorFab

4 жыл бұрын

👍

I've ALWAYS wanted a 12V/stickshift CUCV Blazer, but regrettably lack the space/know-how (or time and money to learn) to build one myself. I can work on stuff, but a full drivetrain swap is more than I can handle. As soon as I find a shop whose work I trust, I'm going on the hunt for the right Blazer and donor truck and making it happen. Excellent build!

@WillometMotorFab

4 жыл бұрын

Great plan - go do it!

Nice walk around! Dave did a great job on his truck.Gets the ideas flowing 👍

@WillometMotorFab

3 жыл бұрын

It’s loaded with good ideas for sure

That truck is so frickin sweet

@WillometMotorFab

4 жыл бұрын

It's a fave for sure

That truck is amazing

@WillometMotorFab

4 жыл бұрын

It's a good piece of gear.

Dang, now I'm really pissed we didn't get further on Flat Iron with you guys! Next year... Kick ass CUCV too. Great walkaround.

@WillometMotorFab

4 жыл бұрын

There’s a good chunk y’all would have enjoyed, and walked all over. I’d love to see Things 1 and 2 doing some high speed stuff.

Love the build. Square bodies are hard to come by make sure you take care of it. My 86 is my daily when I get another daily I can start working on her

@WillometMotorFab

3 жыл бұрын

They’re pretty great trucks for sure.

Awesome build

@WillometMotorFab

4 жыл бұрын

Yeah, Dave did a good job.

Saw this stuck at the Mjt truck show last year. Very clean build

@WillometMotorFab

4 жыл бұрын

It's a looker

I want your seat design bro!! Lol. Awesome build. Keep them coming.

@WillometMotorFab

3 жыл бұрын

You got it!

Well done.

@WillometMotorFab

4 жыл бұрын

Thanks!

I have the same truck with a 5.3Ls. With the original TH400. It hauls the Mail!!! I build a new 6.0 LS with a mild cam and a 4l80e that will go in its place. I stole his idea of the upholstered seat and Love it. It would be cool to see how this truck drives with a Cummins. I have been following his build for a while and it is cool to see it here on YT.

@WillometMotorFab

3 жыл бұрын

It's a good one for sure

Awesome 😎

@WillometMotorFab

4 жыл бұрын

It's a good truck

Great Truck...Wish i could do a ride at Moab , too ! Gerold, Germany

@WillometMotorFab

4 жыл бұрын

We are extremely lucky to have these large stretches of public land. It’s a one of a kind experience.

Nice rig

@WillometMotorFab

3 жыл бұрын

He did a good job for sure

Literally the exact truck I want to build, I already have a 85 3/4 square, 94 p-pump 12 valve, all I need is a nv4500 and a lot of patch panels.......... wooooo gotta love Canada rust....

@WillometMotorFab

4 жыл бұрын

It's a really good one.

@xmo552

4 жыл бұрын

I have a similar truck I'm trying to get going. It's a c30 wrecker going k30 with a lift. I have almost everything except the lift. I need clearance and capacity. I have 37s for it. It seems if I go with 6" up I'll still have to trim the fenders. 8" seems like too much lift. I'm leaning more to 4"-6" and fender trimming or reshaping. What would you guys do? It's a shame my fenders are SooOoOooo virgin, rust free, perfect, and pretty. 😩😁😂

@warpillow8775

4 жыл бұрын

X Mo personally I decided to go with 35s so I don’t have to cut haha, and If your doing a k conversation I’d look into a 52, 56 spring swap and shackle flip for the lift to get max performance from the suspension

@xmo552

4 жыл бұрын

@@warpillow8775 Remember I have to carry a load and drive on the streets also. You don't think that setup may be too flexy?

@warpillow8775

4 жыл бұрын

X Mo for that application I’d still go with a shackle flip for the better ride but I wouldn’t worry about trying to stuff 52” springs up front, I’d definitely look into adding bags in the rear but the c30 rear springs should be more then enough, also for the shackle flip diy4x makes a really good kit for it which gives 4-6 inches of lift depending on what shackles ya go with using the stock springs

GAMBINO!!!!!! Wallingford boys 😂😂

@WillometMotorFab

4 жыл бұрын

They repped the northeast quite well.

Great classic diesel off-road truck, lad.

@WillometMotorFab

3 жыл бұрын

Indeed it is!

Anyway you could do a follow up video with a parts breakdown and build details? Would love to see what went into this, seems like he built it right.

@WillometMotorFab

2 жыл бұрын

I'll probably see him again in Moab in 2023. Could be worth catching up. Go find him on IG in the meantime.

Great work. I have a dually m1028. Does aunt do covers for other vehicles? I live in VT. Also, do you have a link for the rockhound rock sliders? Do they interfere with the gas tank?

@WillometMotorFab

4 жыл бұрын

You can get a look at the sliders at www.rockhoundoffroad.com/. I'll defer to David Gambino for the balance of your questions. Thanks for watching!

Its like totally cool brah

@WillometMotorFab

3 жыл бұрын

👍

Hey man, really love the truck great job you did with it, just a quick question, I own the same truck, do 275mm tires fit on stock rims without spacers?

@WillometMotorFab

Жыл бұрын

I don't know the stock wheel size, but guessing it's around 16x7. I've seen 285s on those.

Please correct me if I'm wrong, but I believe I spied 6" springs with an zero rate and high steer swap? Very nice build, and roughly the same direction I have planned for my '86 m1028.

@WillometMotorFab

3 жыл бұрын

It's a 6" spring with a shim to correct the caster. I think that's what looks like a zero rate.

What is that engine from? Thanks in advance.

Have people just not caught up to you yet!? Only 197 Subscribers?! Fantastic video!

@WillometMotorFab

4 жыл бұрын

The channel is new (2 weeks old), so I’m just starting out. I’ll keep putting out my best quality, and hopefully that warrants an audience.

@rockymtnredneck4888

4 жыл бұрын

Willomet Motor & Fab it will, you are doing great work.

Just curious, any estimate on how much was spent on the build? It looks incredibly clean and I'm dreaming of doing my own build some day.

@WillometMotorFab

3 жыл бұрын

Find him on IG and ask!

Too bad you didn't do a full walk around on everything including setback & engine mounting to run a stock mechanical fan, intercooler setup & AC pump to frame mounting. Exhaust is interesting around the Pam to avoid driveline hitting too.

I think it would look better in desert sand but the green works too

@WillometMotorFab

Жыл бұрын

NATO green tickles me for nostalgia, but I'm a sucker for flat dark earth, too

I live in Panama i love thats car iwant one pichup like this

@WillometMotorFab

3 жыл бұрын

It’s a good one

what is the model number of the Superwinch you have installed ?

@WillometMotorFab

3 жыл бұрын

Hit him up on IG for sure

What transmission does he have in it?

@WillometMotorFab

3 жыл бұрын

I think he said it's an NV4500

@masynuhlenkott7291

3 жыл бұрын

Willomet Motor & Fab oh cool I think that’s what I’m gonna put in mine when I do the swap

Different kind of life over the water. Here everything is bit too uptight for nice things like this.

Hey what type of brush guard is that

@WillometMotorFab

2 жыл бұрын

I think that's just the standard CUCV guard.

@jackpearcy5571

2 жыл бұрын

@@WillometMotorFab thanks bro

Does he want to sell it now since he’s bored with it?

@WillometMotorFab

4 жыл бұрын

I’m pretty sure Dave will get a renewed sense of interest with a freshened up engine, and the tweak on that P pump.

@rangerismine

4 жыл бұрын

I had a tan one I lifted and swapped a NV4500 into. Wouldn’t mind having another.

Someday when my 47 year old ass grows up!!

👍♥️♥️♥️😍😍😍🙏💰🚙🇺🇲👍

Anything is better than the turd 6.2. I put a 454 in mine

@WillometMotorFab

4 жыл бұрын

It's a swap done well.

@xmo552

4 жыл бұрын

@@WillometMotorFab I thought I saw a video where you had a 6.2 and you liked them because you're familiar with them.

@jackdangers3292

3 жыл бұрын

I'd wanna do the same thing eventually. what is needed specifically other than the engine?