ماشاءالله عليك ❤❤❤❤

@DiYSpanner

Ай бұрын

Same to you

Dude made it look easy, you need the forearms of a gorilla to move the tensioner with a tiny spanner like that.

@DiYSpanner

4 ай бұрын

Thanks dude

More 2kd-ftv DIY maintenance please. Change filters, egr manifold throttle body cleaning, change oil and coolant and more. More power.

@DiYSpanner

2 жыл бұрын

Thanks

Thank's

@DiYSpanner

2 жыл бұрын

👍👍👍

Thank you sir

@DiYSpanner

3 жыл бұрын

Thanks too sir

Thankyou po sir

@DiYSpanner

3 жыл бұрын

👍👍👍thanks too sir

Are there no rough timing marks I should look out for?

@DiYSpanner

2 ай бұрын

Nothing

A

@DiYSpanner

3 жыл бұрын

Thanks

sir same lang ni sa hilux g 2015?

@DiYSpanner

2 жыл бұрын

Basta d4d same lng sir

Sir same lang ba sa 1kd ftv na engine

@DiYSpanner

2 жыл бұрын

Same lng sir

Does da kd1 engine use same drive belt as the kd2 engine?

@DiYSpanner

2 жыл бұрын

Yes sir

Same sa 2015 fortuner ba yan?

@DiYSpanner

3 жыл бұрын

Same lng sir

@daddyjer3044

3 жыл бұрын

Salamat

Mga idol inig Kahuman ug ilis sa Timing Belt sa 2KD-FTV Engine unsaon man pag wagtang aning migawas sa Panel Board nga T-TIMING BELT nga sign? Migawas dihang miabot ug 150,000km idol pls answer idol...salamat

@DiYSpanner

2 жыл бұрын

Kini lang sunda nga instruction sir. To reset the timing belt indicator: Turn on the ignition. Adjust the display so that it is showing the TRIP B reading. Turn off the ignition. Press and hold the trip meter button and turn on the ignition. Continue to hold the trip meter button for 5 seconds or more ensuring that the timing belt warning light is flashing. Release the trip meter button then within 5 seconds press it once. You now have 5 seconds to select the interval to the next timing belt change. turn the trip meter button to advance through the interval options. Note: the interval options will be a two digit number representing the kilometres multiplied by 10,000 eg: 15 = 150,000 Km’s Or if not changing the interval hold the trip meter button for 5 seconds or more. The display returns to the Odometer reading and the Timing Belt light will turn off To reset the Timing Belt reminder message without the Multi Information Screen. Switch the ignition ON and set the TRIP meter RESET knob (located on the lower right hand side of the cluster) to display the Odometer reading (not the trip meter reading) and then turn the ignition OFF. Press and hold the TRIP meter RESET knob and turn the ignition ON. Press and hold the TRIP meter RESET knob for a further 5 seconds, release it and then hold it in again within 5 seconds. Enter into the SETTING MODE and change to T-BELT DISPLAY MODE. Press and hold the TRIP meter RESET knob for a further 5 seconds. The display now changes to TRIP B and the warning light turns off indicating reset procedure is complete. Release the knob and turn ignition to OFF.

@reynantegascon4312

2 жыл бұрын

Salamat sir