DRIVABILITY OF A CAMMED 5.3 WITH A 3400 STALL CONVERTER ?!
Автокөліктер мен көлік құралдары
In this video I go over the drivability of my 2005 GMC Sierra 5.3 with a btr stage 4 cam and a 3400 circle D stall converter !
Socials
IG / andregarcia5.0
TIK TOK vm.tiktok.com/TTPdkVjWXB/
Пікірлер: 64
Great video, explanation. As I'm teetering on a cam selection on my LS1 Silverado build, I think you just solidified which direction I'm going to go.
I will say that a FTI 3200 stall converter on a stock setup makes the whole truck fill different. It fills like your towing an anchor in first gear but once you get going it feels amazing. Top it with a corvette servo and a shift kit, it’s a sleeper since nothing has been done to the engine yet.
@matthewvarnam4302
4 ай бұрын
If you was to put better rear-end gears in the truck it would take off better.
Very informative brother 🙌🏼 great video as always !
@Andregarcia5.0
Жыл бұрын
I appreciate it brother 🙌🏼
Great, informative video. Thanks.
Nice video man 👍🏻 totally helpful
Very nice truck bro sounds mint to
Great video! Truck Sounds SICK!!! Invest in a steady cam for your phone….
Top notch bro I love it
ive watched this video like 3 times and idk if you never mentioned it or i just missed it but what gas to you run yours on?
wow I love the sound of that camshaft...please give me the name of that cam and all the number of the specs of that camshaft...that is one mean sounding camshaft at idle and going down the street...I would love to see Dyno numbers and track time slips...if time slips look Pretty reasonable I would like to go with that setup of yours and go from there????
What is your average ideal rpms on cold start and when put in drive.
Where did u get ur tune ?
You need your tuner to look at your 1-2 shift. That was a very lazy shift! Since its a 4L60E, you should add a little more torque management so it completes the shift quicker. Ive had to fix soooo many trans tunes from a local performance tuner. Its kind of annoying and now I look for it everywhere... lol
@primosproject1487
9 ай бұрын
I recently installed a 3200 stall converter on my 2003 silverado 6.0 cam stage 2 and TBSS intake but wont shift after 2nd When i had the stock torque converter was shifting good
@primosproject1487
9 ай бұрын
4l60e stock transmisión and 4:10 g80 differential
@AbslutZr
8 ай бұрын
Add more torque or take it away while shifting?
@woadie_5108
4 ай бұрын
Install a corvette servo
@cliffweatherbee6914
4 ай бұрын
@AbslutZr add torque management, which pulls timing during shifting. Only add about 10%, then you can shorten the time needed for the shift. Under full power, I shoot for 0.125 seconds. As long as you gave the pressures and torque management in proper place, that shift is crisp and firm.
Richard Holdener dyno tested this same cam in a 5.3 and it made peak power at 7600 RPM with TrickFlow 245 cathederal ports and a BTR Trinity intake. When you get on it around 7:57 it seems like the tune shifts around 5500-6000. I assume you have stock heads and intake but even so, IMO, it probably needs to rev out more to really eat. That said I can understand the limiting factor currently may be your transmission.
@Andregarcia5.0
7 ай бұрын
Yes that was a limiting factor ! I have a tr6060 manual trans now and she eats ! Redlines at 6500 and I can feel it’s a night and day difference
@IEatMyCatch
5 ай бұрын
@@Andregarcia5.0any reason you didn’t go with a built 4l80? Rebuilding mine as my tranny burned out the other night
Awesome!! Is it the BTR Truck stage 4 or the LS Car stage 4? Thanks !!
@Andregarcia5.0
11 ай бұрын
Truck cam !
I have a 08 Chevy Tahoe with a 5 3 in it and I was thinking about putting a stage 4 cam in it wondering can I drive it daily and will I still be able to have AC
Are you still running shorty headers? If not would you like to sell them if you still have them?
Looking back now. Did you ever think it’ll be manual swapped right now? Haha All you’re missing a torqstorm blower. Just installed mine
Nice truck bro do u still have the same transmission since making this video
@Andregarcia5.0
8 ай бұрын
Thank you bro ! And I do not I now have a 6 speed manual tr6060
Do you have to updraft fueling system at all? As in injectors or pump? also did you have to get it tuned?
@Andregarcia5.0
Жыл бұрын
I don’t it’s all stock. And yes I have a street tune l
🔥🔥
I recently installed a 3200 stall converter on my 2003 silverado 6.0 cam stage 2 and TBSS intake but wont shift after 2nd When i had the stock torque converter was shifting good Its a 4l60e stock transmission 4:10 gear differential g80 and TBSS intake Does the transmission needs to be tuned?
@Andregarcia5.0
9 ай бұрын
Yes I would recommend to get it retuned first and go from there
Quick question do I need to install a high rpm stall on my truck in order for it to be drivable if I just tune it
@Andregarcia5.0
11 ай бұрын
No, only if you install a cam that requires it !
@MrUnclebuc1
10 ай бұрын
I have this same cam with ported heads on my 2011 sierra and drove it with stock converter for over a year with no problems other than brakes felt weird because it did not create enough vacuum at idle but thats it I finally installed a 3200 stall and love it do yourself a favor and just get the converter installed when you do your cam
@panteraklan681
4 күн бұрын
@@MrUnclebuc1do you have the part number from stall bro?
DREZZY!!
@Andregarcia5.0
Жыл бұрын
YOOOOO!!
What rear gear are you running?
@Andregarcia5.0
11 ай бұрын
3.73 !
What causes a car to stall? Mine does it all the time. Same motor and all
@charlieb7165
Жыл бұрын
If you doing have a converter it might be your cam is too big/not tuned properly
@thec.mccshow4840
Жыл бұрын
@@charlieb7165 i called jegs. They said the stage 4 cam with 3300 stall is not streetable. Im so ready to throw in the towel. Like I said before, I have the same setup and you. The guy who did my swap doesnt tune ok the regular. He drove it and sent recordings to someone until the person felt that the car was properly tuned. Still stalls. Sighs
@MrUnclebuc1
10 ай бұрын
@@thec.mccshow4840 what state are you located I have the same set up too but you need a quality tune for it to drive the way you want it too do not get rid of it you will regret it
@thec.mccshow4840
10 ай бұрын
@@MrUnclebuc1 Louisiana
@thec.mccshow4840
10 ай бұрын
@@MrUnclebuc1 how is the drivability for you?
U have a link to that stall converter ?
@Andregarcia5.0
Жыл бұрын
remco-transmission-parts.com/products/rm-01-12-05-2b?variant=40757175648436¤cy=USD&
@1low03_
Жыл бұрын
@@Andregarcia5.0 thanks badass truck 🔥
What gear
@Andregarcia5.0
6 ай бұрын
3.73
Bet your neighbors love you…
What's your gas mileage?
@Andregarcia5.0
Жыл бұрын
I would estimate about 10 mpg hahaha
@alexayala6720
9 ай бұрын
@@Andregarcia5.0I get 11mpg with my 6.0 stock 1500hd 4x4
Shut up and do another pull! Hahaha. Jk bro. But nice pull. It sounds great
Trans sounds like clutches are slipping
@Diego-zy5dc
4 ай бұрын
He literally said it slips 😂
Do the rpm stay low after 50 mph
@Andregarcia5.0
Жыл бұрын
Yes they do