How dare you make an informative video in under four minutes? Great info and to the point.

@DIYWithAaron

2 жыл бұрын

I know right... I should have babbled on and on.

@OrlanDave

3 ай бұрын

@@DIYWithAaron Where was the ad for Square Space?

@paullelys161

Ай бұрын

And no annoying background music.

I'm new to drilling. I actually thought I was a failure for failing to drill a straight hole. Nice to know that this problem is so common that products have been made to solve it.

Excellent and well researched advice. Comprehensively explained in clear concise language. Many thanks! 🙏🏼

Since I have a drill press, I drilled a hole into a block of wood, put it on the bench and made sure it was level. Then I chucked the bit into my hand drill and stuck it into the hole. Then I glued a circular level to the back of the drill and made sure it was level. Now, I can free-hand a vertical hole pretty well by keeping the bubble centered in the level as I drill.

Thanks man! High value, straight to the point

Have seen too many videos on this topic and almost gave this one a pass, but then, glad I watched it. Very nice video, no fuss, straight to the point and most importantly, very nice options listed out. Do post more tips&tricks for DIY'ers..

@DIYWithAaron

2 жыл бұрын

Thanks... I'm glad I hit the mark with this one. I'll be sure to keep posting more vids.

@jprevard

9 ай бұрын

Agreed. Best part, no stupid, loud guitar riff intro like most creators use.

Just used the two blocks of scrap wood in the clamp option. Fantastic result. You will make experts of us all 😀

This is why I love youtube. Thanks for posting this.

@DIYWithAaron

3 ай бұрын

You're welcome

Great video. I will make that jig with the 2 pieces of wood but those drill blocks look pretty sweet too.

You are a great teacher! Looking forward to see your channel grow exponentially! 💪👏

A major plus for the drill block you showed is the V shaped cutout in the bottom that allows you to drill crosswise through the centre of a dowel or pipe.

@DIYWithAaron

2 жыл бұрын

Definitely!

The DrillBlock is for me. I appreciate your to-the-point videos minus stupid blasting music and an audition.

The only cutting faces on a drill bit are the two leading edges so once you've got the hole started the rest will follow, so removing the drill block to drill deeper or thorugh a peice is no issue so long as you let the hole guide the bit. Nice post by the way.

Exactly the video I was hoping for. Thanks Aaron.

Excellent video. Great ideas, clearly presented. Very helpful. Thanks.

I've used a drill block for years, and it's great. My top pick.

@DIYWithAaron

2 жыл бұрын

Yeah, I really like them too. Cheap and effective for most tasks.

Excellent info, exactly what I was looking for! Thanks 👍

This is extremely useful. Thanks

The offset blocks are a great idea. Great info!

Thank you for sharing this. I used a speed square with mixed results. A drill block is in my future. Thanks man.

I love the CD trick, I'll try it next time

Super helpful!!! Thanks for putting this out there for us perfectionists…

Short and to the point. I like it. Thanks for the good information.

I have one of those Drill Blocks I bought a few years ago. They work great. Better than trying to eyeball the drill. Yes you cant drill a deep as you would like, but the hole becomes your guide to finish drilling.

That was just what I needed! Thank you for sharing!

Great tips! Have a project I've been working on that stumped me about how to drill some holes straight. Now I know how- Thanks! Liked and subscribed.

Nice video mate, it's really helpful...

You can also use a plunge router to start a straight hole at least. It has the flat bottom plate to align it with the material you want to drill. It functions similar to the alignment tool. Just the travel is pretty limited. .. :o)

Dude, thank you so much. Im here because I made a mistake, more than once. Headed to Lowe's for both a drill block and drill guide.

Great video! Excellent tips.

Holy Shit!!!!!!!!! Excuse the language. I'm in love the the 90 degree scrap trick. Can't wait to try this out. I can do hundreds of holesna week and it has to be spot on. Usually isn't. Will update.

Great video, I subscribed immediately, thanks for the great tips

The clamping together of 2 pieces of wood is a great idea since it is quick and the surfaces can be shifted/re-sawn as they become worn.

Excellent info thanks

Very helpful video! Thank you!

Excellent. While I am sure that drilling straight into a block of wood siting on your bench maybe easy for some, these tips have really helped me drilling straight into wood where I have very poor access. A small scrap wood 90o jig was a brilliant idea. Thank you.

#4 works great. They even make ones for drill and tapping holes in pipes that had a curved base.

There is hope for my project. Thank you.

Best video on the subject.

Thanks fot demonstration. I already subscribed.

well finally --never knew there was such a gadget as a drill block ==love your two wood guide for straight drilling --90 degrees -----thankyou --many of us cannot afford a fancy drill post guide ----well done--- from the poor artisans club !

Great info, thanks

Thank you! The portable drill guide looks perfect for drilling horizontally - it's so easy to get this wrong if the hole is a different height than you are, or if drilling into brick etc. Off to buy one now.

@DIYWithAaron

11 ай бұрын

Glad it helped!

Nice video. Very helpful!

Great tips! Thank you!

Thanks for the video, very informative and helpful; will try finding a precision drill guide.

Thank you very good job

Trick no 3 is GODLIKE!

thanks for the tips!

Really useful, thanks man

Thank you for your video. (That scrap wood jig has worked well for me. But I think I'd like to graduate to a drill block. I may purchase one soon. Thank you again for your video). God[Bible] Bless.

Nice tips!

New to the channel, but based on how great this video was, I will be checking out more of your content!

@DIYWithAaron

Жыл бұрын

Awesome, thank you!

Thanks for this you are a top man! 👌😀

Great tips!

Thanks for the video

this is really helpful for guitar builders on a budget, thank you so much

@DIYWithAaron

Жыл бұрын

Happy to help!

great video, used your link and bought the drill block

@DIYWithAaron

2 жыл бұрын

Awesome, thank you!

Great video man

CD was interesting to say the least. Thank you

Very nice

Wow a speed square actually works really well, thanks

Great video bruh❤🔥

Love the content bro!! First time watching, definitely subbing and smashing the bell!!🤙

@DIYWithAaron

2 жыл бұрын

Appreciate it!!

Big gator tools drill guides, they make a few varieties. I use them for attaching door hardware either mag locks or door holders.

Most useful video!!

@DIYWithAaron

4 ай бұрын

Glad it was helpful!

Great video brother. Good job!

@DIYWithAaron

Жыл бұрын

Appreciate it!

Excellent 👌

You can start with drill block then use the wood blocks to keep you straight. 🎸. Great video. Thanks. I'm putting handles on cabinets not sure if a portable drill press is necessary. If holes are less than 1" inch deep then ill be okay without a press.

This video helped a lot. I'm building an end table and I realized after doing the glue-up that it's not going to fit in my drill press. I have an old Craftsman drill guide with drill permanently attached drill but it has the smallest jacobs chuck I have ever seen and can't take the bit I need.

This is how videos should be done.

Thanks a lot!

For the second con of the drill block (drill bit not matching the hole), you can drill a hole one size smaller, and then widen it with a bigger drill bit.

#3 is awesome

Drill blocks are used expensively in the aircraft industry but with a little foot on each corner to accommodate the curvatures

@DIYWithAaron

2 жыл бұрын

I did not know that... you mean extensively not expensively right?

@davidwilliams5942

2 жыл бұрын

@@DIYWithAaron yes extensively I used them nearly everyday as aircraft Fitter with Airbus

DUDE... Thia video is exciting ! Thanks fir the tips.... this old man 74 can use etc. make more video's please ! Mike Hendershot, Beaumont, California. Oct. 23. 2021

@DIYWithAaron

2 жыл бұрын

Thanks Mike! Glad you liked it... I'll try to get more vids out soon.

Great video! Thanks for sharing bro. I have a little recommendation to save some money. It will either be for free pretty much or really cheap! and all it takes is a little effort and scrap metal. you can make your own drill blocks! if you already own a drill press, mill or even a metal lathe or maybe can get access to one of the above. All you really need is a scrap piece of steel, cast iron, Aluminum, possibly bronze or even a hard wood a could work in a pinch. So bring your most used drill bit sizes with you. Simply drill a series of all your most used Drills and then you have a drill press accurate Drill block that works great! And youll save alot of money! The gator brand drill blocks are pretty pricey for all sizes. so i did this to save money. I had some scrap metal so i didnt spend a dime on it. You may ask why would someone need this if you have a drill press? Well the short answer is the portability of the drill block. Sometimes i have to go to sites and need to drill fairly accurate holes but only have a power drill. So this works great for those situatuons, Or maybe you just need one hole and dont want to go in your shop to drill it lol (ive been this lazy many times!) Lol anyways its useful and youll find yourself using it almost anytime you need to drill holes. If you use hardwood it will not last as long or stay as accurate as steel, cast iron or even Aluminum or some other harder metals maybe even softer like bronze could work for a while. Well good luck everyone and i hope you all have a nice day. Thanks for reading my free book lol

@DIYWithAaron

2 жыл бұрын

Thanks for the positive feedback. I totally agree that making your own drill block is a lot cheaper if you already have a drill press. I was specifically thinking of those who didn't have a drill press and needed to be able to make a straight hole on occasion. Good tips though for making a drill block for those times when a drill press is unfeasible or inconvenient.

Some really gd tips thks. I’m currently making some bookshelves out of some tongue and groove flooring and need to glue several boards edge to edge. I’m adding some dowels to the edge joins for extra strength as the tongue and groove on its own is a bit loose. I found it really challenging drilling straight dowel holes into the edges of the boards / that’s even with using a dowelling tool. Any suggestions? The tips presented assume you have a flat face on the material perpendicular to the drill but drilling holes in the edges of boards doesn’t.

@DIYWithAaron

2 жыл бұрын

Do you have extra T&G boards that you could build into a jig? If you were able to use the T&G to create something that interlocked "well enough" with your workpieces and you cut the other side to a flat face for your dowelling tool to sit on that might help. Hard to know without seeing it, but that's my first thought.

@abbbee8918

Жыл бұрын

I would use shorter dowels. Half the length is half the inaccuracy. They are mainly for maintaining alignment, ie resisting shear more than strength, but just use more if you want to use them to resist tension/separation forces.

Cool !!!

Great guide! I am wondering , if there is a home-made jig for a forstner drill bit at all?

@DIYWithAaron

Ай бұрын

You could make a 90 degree scrap jig with a notch at the bottom for the bit head to fit. As long as the shaft of the drill bit is nestled in the corner, it would probably work.

Great video. Can any of these techniques be adapted to drill straight & centered into the end of a wooden dowel or a chair leg? (If not, how would you do it without a drill press?)

@DIYWithAaron

Жыл бұрын

Every technique can be adapted somehow, just depends on how easy it is. I had a situation where I adapted the 90 degree angle trick to drill straight holes into the ends of two long slim pieces of metal in an epoxy repair that I wanted to reinforce with a steel bolt. See it at: kzread.info/dash/bejne/g2SXxqyelKbXlbg.html You're going to need to figure out a jig of some sort to line things up.

Thanks

@dle7725

2 жыл бұрын

Wish i had seen this before drilling a peep hole in my door 🚪. Its slightly off but the only people who will notice are just happy to have the peep hole,😂

Great video help. I tried one of your methods and struck oil.

I use an drill block or guide made by Big Gator Tools. It has the v shape cutout on the bottom for drilling in round pieces. It works very well. I bought it online from USA. And this purchase has a little funny story. At customs office when I received the package and opened it for inspection the customs dude was stunned. He had never saw something lile this until then and called a coleague to look at the guide, to make sure it's not a firearm part. I was prepared for that and I pulled out an drill bit from my pocket and showed them how it works. They asked why I bought it from USA, because there are some taxes I have to pay. I told them that their reaction to seeing it is the answer. There was nothing like that guide, to be found on Romania's tools market, and the EU sellers asked more than double the price in the US. This happened more than 10 years ago. Now there are several options to buy, locally, but all are polymer body with metal bushing, not solid hardened steel like the Gator guide.

@DIYWithAaron

2 жыл бұрын

Wow... I didn't realize the drill blocks were so hard to get in other countries. If I had to go though all that hassle to get one at a reasonable price I would have went for an all metal one too. Good thing you thought ahead and had a drill bit handy for explaining it to customs.

The drill guides usually have a V shaped groove in the base so you can put a pipe or other cylinder in it to drill centered holes.

@DIYWithAaron

Ай бұрын

Good point... I probably should have mentioned that in the video. The portable mini drill press also has a V machined into it's base for the same purpose.

i use the chin metod its pretty reliable

Very good 👍

I bought a Cheap drillpress 14 years ago, 30 euros, 350 Watts; still fine and accurate, wood or metal, semi_pro use. Cheaper than your handbill and lots of fiddling

@DIYWithAaron

2 жыл бұрын

Wish I had a cheap drill press, but I still don't have one. Spent too much on my drill I guess.

I glue a small round bubble level to the back of the drill. Not perfect results but helps a lot if I want to quickly drill free hand

@DIYWithAaron

10 ай бұрын

That's a good idea. I used to have an old drill with a level in built into the head although it was vial style so no side to side accuracy unfortunately. I could see your way with a bubble level being much more useful then what I had.

The two pieces of wood clamped together, save me! Thank you

CC is a good thing...

Angle brackets works.

I epoxied two 1 inch spirit levels to my drill. One for level and one for plumb. Or I use a drill guide.

Drill Block obscure drilled material, how do you land hole exactly where you want it?

@DIYWithAaron

2 жыл бұрын

You can pull the block up on the bit and then you can see the tip of the drill bit in order to place it. You can also use an awl or nail to make a dimple in the wood that you can use to see/feel where the right spot is with the bit before you use the drill block.

how well do they(portables) perform with hammer drill function?

@DIYWithAaron

2 жыл бұрын

Assuming your talking about the portable mini drill press, I don't think it would hold up to a hammer drill setting. Never tried it myself though.

@aphleesegurtra2820

2 жыл бұрын

@@DIYWithAaron yes, as I'd love to have something that would also work well on tile, concrete, etc. The main reason to purchase (imo) is for consistancy reluctant to ask the sales rep... as they usually don't have the requisite experience. I'd like to hope I'm wrong but history..

Howdy. Bewilders me that drill manufactures have not thought of furnishing drills with bubble levels ... Regards.

@DIYWithAaron

Ай бұрын

I have an old Ryobi with spirit levels built into it. Not a bubble level, but adding levels did cross at least one manufacturer's mind.

You have the skills to make jigs. I would like to see a gadget to make pocket holes with differents angles, like adjustable, at any angle. Those we buy aren't ajustable.

@DIYWithAaron

8 ай бұрын

Interesting idea, but why would you need different angles for pocket screws?

Plunge routers work really well too, if you have one that is.

@DIYWithAaron

2 жыл бұрын

Good call!

I’ve always wondered why manufacturers don’t include.a flat surface to the top of their machines which lies parallel to the axis of the drill bit? This surface could then be lined up with anything that would give the required straight hole. Also a spirit level, perhaps two lying at right angles to each other could guide when drilling holes in walls.

@DIYWithAaron

Ай бұрын

I know some manufacturers, like Ryobi, have added bubble and/or spirit levels to their drills in the past to help you line things up. Drilling perfectly perpendicular holes to a work surface is a pretty specific requirement most cordless drill owners probably won't care much about when buying a drill so I'm not surprised manufacturers don't focus on it much.

I'm building a custom dog crate, and I'm using wooden dowels for the bars, I have the perfect drill bit for them to fit snug, but I can't drill a hole or insert a screw with any resemblance to straight. I didn't know drill blocks existed, but I'm heading out to buy one now! Thanks! I totally wasn't going back to the Home Depot already because I didn't buy enough lumber... who would suggest such a thing? (ok, yes I am).

@DIYWithAaron

3 ай бұрын

A drill block is real handy to have around. Should make your life much easier. Good luck with your project.