Excellent review Matt. Not something I could justify buying. ❤❤

@MattCarves

8 ай бұрын

I would say buying burrs is more of a priority. 👍

@davidwillard7334

3 ай бұрын

I Didn't buy one Either ! Like l stated on the DREMEL u.k website ) there's a much simpler idea if you want that to be in the fixed position !

Great video, thank you. I subscribed :) The earrings are lovely. I use the Dremel in the press with a cutting tool, also it makes a great little drum sander if you stick the tiny little drum sander bits in it, for rounding corners on small parts or curving edges, or sanding a little bevel edge into a straight piece that you would normally do on a router table. For fine drilling there's a bit of play. There are a lot of tiny and bigger screws and hex nuts hidden all over the drill press, that aren't mentioned in the manual, for helping fix wobble. KZreadr JettaMan Designs has two great videos for setting it up for accuracy and shows all these screws (which can be very loose straight from the factory). The video is: 'How to set up your Dremel ...' (ps I don't know him). Well, it's not cnc standard but I think it's good for the price.

@MattCarves

3 ай бұрын

Cheers for that info. will check that video out. Yes definitely not CNC standard but good enough for the price. 👍🙂

nice video!

Great review Matt. Thanks. I have also used mine for pre-drilling for scrollsaw work.

@MattCarves

8 ай бұрын

Awesome, cheers for watching 👍

Great info Matt, does the drill press come with the workstation or additional purchase? And do you remember how much the workstation cost?

@MattCarves

8 ай бұрын

It's all one unit. I think I paid $85 new Zealand dollars that's just over 50 usd.

I have my dremel suspended on a rope that goes through a pully and then hooks at different heights depending on what angle I want to be working at. I've not been bothered by the dremel swinging but my rope is weighted (so it doesn’t run away when I put my dremel away), maybe that helps. Thanks for the review. I don't think the workstation is for me but the idea of having two dremels really appeals. I might ask for another for Christmas.

@MattCarves

8 ай бұрын

Cool. Sounds like you got a working solution. Cheers for watching and commenting 👌

Great info. Thank you Matt

@MattCarves

8 ай бұрын

Cheers Linda

Great vid I checked the price here $98.50 in NZ well worth it so got it - probably has the worst assembly diagram but real makers don't read the instructions anyway fits my 8220 nicely

@MattCarves

8 ай бұрын

Cheers Mike. Yeah dremel instructions aren't the best 🙄. I reckon it's a good addition for dremel carvers. Have a good labour weekend 👍

Looks great Matt, I was using a Dremel 4300 with a flexshaft the other day running at 25,000 rpm and the tool rapped around the work and got under the work for just a second. Apparently that's all it take to bust the core in the flexshaft😪. So I tried finishing up the piece with a piece of crap rotary tool with a flexshaft that I Frankensteined on there and that flexshaft quit working as well😮‍💨. So I went to the store and got a second 4300/ flexshaft setup and now you're setup looks exactly like mine. 😉 Too bad I can't send you pictures. Oh and I have a foot control going to a switch to choose which tool you want to use.

@MattCarves

8 ай бұрын

You sound like you got it sorted, foot pedal sounds cool. Yeah sometimes flexshafts snap pretty easily.

@grillinrich9205

8 ай бұрын

I actually made my foot switch. A push-button on-off switch set up between 2- ¼" sheets of plywood, a wire to plug 🔌 a wire with the female plug( the opposite one) it works great. I prefer it to turning equipment on and off constantly.

@grillinrich9205

8 ай бұрын

I had ordered 5 flexshaft cores directly from Dremel and they arrived today. You will never guess who owns Dremel. The Robert Bosch tool company who also manufactures auto parts.(Volkswagen, Audi)

@MattCarves

8 ай бұрын

Yeah, bosch has its fingers in a lot of things. Have seen their logo on brush kits for the dremels. I think they make the grinders for arbortech as well.

What a cool little gizmo, do I need it... No, do I want one.... definitely lol.

@MattCarves

8 ай бұрын

Haha. It's definitely not a must-have tool.

i'm using standing cloth hanger i stole from my ex :)

@MattCarves

7 ай бұрын

Nice, finding a way to get things done 👍🍻

Just Another Running Commentary show ! Like website DREMEL U.K ! is ! YOU CHEAP ! FISH AND CHUPS ! KIWI !!

@MattCarves

3 ай бұрын

👍😊