Jordy, thank you for the quick unboxing 😊learning a lot for you . Thank you

You've already been my new go to channel of all time. No Shit!!

Congratulations on your win!,! Thanks for your video

Jordy, I bought one when it came out. Wasn't sure what I was going to do with it. I have a bunch of dremel tools, but this is a fantastic tool for details. It has rescued some of my junk carvings from the eternal fire.

@CarvingFusion

4 жыл бұрын

Its just way to weak 4 me

congrats Jordy , keep on carving.

Thanks for making these videos there helping me I'm a biginer I'm always whatching your videos..

Thanks for this I have been thinking about getting one!!

Thank you! The live demo really helped.

My Dremel 4000 stopped working, flipped brushes and cleaned commutator with a pencil eraser. Good as new and congrats on the win. always looking for new vids.

@mocnyang

5 жыл бұрын

oh and all you watchers out there, don't forget to hit the like button, this channel deserves every one of them, this channel is the reason I started carving! Thanks again JJ!

Omg... you mauled that box 😂 Thanks for the video, I was lucky enough to pick one up on clearance for $20

...got one today...you're review very helpful...

it did well on the small hair details so yeah theres a place for it, nice vid ;)

Winner winner chicken dinner! Lol. Good for you JJ man. ;)

Make it into a jackdanels air plant thing or a jack Danlies change holder. It looks like a wine or liqueur barrel

Hay Hay now. Congratulations Jordy!

@CarvingFusion

Жыл бұрын

Ty

Awesome stuff! learning so much from you Jordy, I have a question.. that collet chuck, does it adjust to 1/4 inch shaft?

@CarvingFusion

5 жыл бұрын

No sorry not that big

@franksadventures4you

5 жыл бұрын

@@CarvingFusion Ok cool, thanks again Jordy, Keep the videos coming. I love your work. can you make a video on whiskers on beard and mustache if you have not already?

@CarvingFusion

5 жыл бұрын

@@franksadventures4you thank u, yes there should be a video in my playlist

nice win bud!!

What's your opinion on flap Sanders? I'm digging that Jacobson chuck; gotta get my mitts on one of those guys. 👍✌✌👍

@CarvingFusion

5 жыл бұрын

I make my own Sanders (my own kinda flap

I have one, nice tool. One thing I do not like is that the lock button is exactly opposite the power button, so I keep accidentally grabbing the power button while using the lock button. So I’m trying to add a new bit and my fingers push the power button by accident, causing it to spin. I do not understand why did they put the buttons on opposite sides where the fingers inadvertently push the opposite button?

Do you think it's possible to do some bulk removal with the Dremel Stylo? Would it work with Kutzall Flame Burrs (extreme or original), or some of the more aggressive aluminium cutter burrs? Perhaps on medium/soft wood. It would take more time, but can it do it?

@CarvingFusion

2 жыл бұрын

Nope stylo Harley even carves

Great info. Carve a wood spirit hood ornament for your Toyota lol . Thanks for the vid .

@CarvingFusion

5 жыл бұрын

Haha

Hey Jordy , I used one of those chucks in my Wen and it kept getting tighter every time i used it until it would not come off. I had to take two pairs of channel locks to get it out , I don't use it any more.

@CarvingFusion

5 жыл бұрын

Ahaha

@CarvingFusion

5 жыл бұрын

Ya it's just on my stylo

Question: is the dremel 3000 better than the 4000? As in can the 3000 be just as good as the 4000 or is it best if I get the 4000. I'm thinking of getting a new rotary and I want sure if the 3000 was worth it due to it being cheaper than the 4000. Thanks! Love the videos!!

@CarvingFusion

5 жыл бұрын

Hmmmm all I can say is I like my 3000! Not really to sure how to compare them!

@laurenoliva1191

5 жыл бұрын

@@CarvingFusion well that works for me!

@laurenoliva1191

5 жыл бұрын

@@CarvingFusion thanks !

@JudiMiles

3 жыл бұрын

Just a wannabe here. Thank you for great advice and instructions! I have a 3000 is all. I’m wanting your advice on first accessories and setup please. I’ll be working outdoors.

Old school glass Mason jar! I'm sure you've already done it since I'm a year late...

Yeah the Stylo seems more like a Dremel engraver which works a bit different to a rotary tool I think? The rotary ones can run away sideways whereas the engraver has a different action I think? I could be wrong though? Cheers man.

@CarvingFusion

5 жыл бұрын

Nope, this one spins just like a rotary

Hi Jordy. I have Dremel 3000 and it's great for almost anything. But I need a small rotary tool such as Dremel stylo for glass and stone engraving. What did you thing about Stylo for glass and stone work. Did he fit for the job ? Or maybe marathon Micromotor. You have both rotary tools, what's your honest opinion for these two machines. For wood carving Dremel 3000 works just fine.

@CarvingFusion

Жыл бұрын

100% the micro motor 100% the stylo thumbs down for me

@evgenikatsarov7970

Жыл бұрын

@@CarvingFusion Thanks so much. I saw one of your videos with stone engraving but that wasn't a diamond burr maybe one agresive burr from Kutzall. Sorry for the stupid question, but I try to engrave just from 2 months and I know nothing. And so far my carvings are disaster. Did I can use different burrs for stone carving except diamond ones ?

Umm if you pull those brushes out make sure u put them back in the same exact position as they where so they keep wearing the same and it don't go against it.

Can you use this for wood carving with soft wood like animals and things that are small?? I'm a first timer here I'm still learning.

@CarvingFusion

2 жыл бұрын

Buy urself a cheaper style dremel, I would not use this for carving

@katzeyez1979

Жыл бұрын

Yes it would

I have learned a lot from ya

The “bogging” out is a feature I think because the motor isn’t as strong it shuts off when you push to hard

@CarvingFusion

3 жыл бұрын

Ya because its junk

@katzeyez1979

Жыл бұрын

It's not set at a good speed for that and it will bog down when using too much pressure. It's best for detailed work, softer wood and engraving

4:07 lol the caption! hell yea that’s the way to unboxing

Thanks

Do u think it is strong enough to engrave aluminum, stainless steel or even jewelry?

@CarvingFusion

2 жыл бұрын

I would not suggest it

@USNAV

2 жыл бұрын

@@CarvingFusion sounds good. Thank u.

Jordy, I have a question for you brother, do you ever do female wood spirits? I haven't seen anyone do that yet

@CarvingFusion

Жыл бұрын

I kinda have but ya they are super hard to do

Just got this for 20. Never used one now trying to see what it does

@aphexanthony

3 жыл бұрын

Omg I got mine last week for 37

Can I use a drill bit with this model?

@CarvingFusion

3 жыл бұрын

If u want

where's the link for dremel makers studio?..

@CarvingFusion

4 жыл бұрын

dremelmakerstudio.chaordix.com/

....This is actually my first dremel tool and I could not for the life of me figure out how to get the damn accessory in...imagine my surprise when I see you take the damn piece off XD

@CarvingFusion

4 жыл бұрын

Lol

This dremel is suppose to be used the same as the other ones, but easier to handle, and the motor is suppose to stay cooler

@CarvingFusion

4 жыл бұрын

Not much power

@dustyscudd

4 жыл бұрын

Yea, I definitely agree with you on that, I bought one to try it out, works good with rocks and glass but as far as wood, pretty much the small detail you mentioned. Lol

So, how's that tool been holding up?

@CarvingFusion

3 жыл бұрын

I never use it lol

@deniece.anastassia

3 жыл бұрын

@@CarvingFusion would you like to get rid of it?

You can make nice sculpture of small bear or owl, or head of eagle. Can provide you with extra images fished from internet in case you have temporary crisis of genre.

@CarvingFusion

4 жыл бұрын

I dont understand

@ilanasharon30

4 жыл бұрын

@@CarvingFusion Which part? I gave you advice what to make from that peace of whatever you showed and offered extra images. Sorry I didn't make myself clear enough. Thanks for video.

Just a guess , in my opinion you’re rarely going to use that tool on wood

@CarvingFusion

3 жыл бұрын

Agreed

Carve a pod of orcas around with your new dremel 👍

@CarvingFusion

5 жыл бұрын

Lol

Oz plus Treeline

A shark for shark week haha!

whats name of bit

@CarvingFusion

11 ай бұрын

Kutzal

Talks about how the weight of the 3 jaw chuck and large bits are bad for the bearings. Then proceeds to do the opposite of what he just suggested. Your gonna burn that thing up fast. I can hear the thing is unbalanced by that irritating buzzy whine it's putting out. Bye bye bearings. While the collets are less convenient, they offer less runout and tool vibration.

Carve a Japanese fighting fish.

It almost sounded at 1:04 like you said " you can display your hard on " .Lol.

This thing is no Bueno any resistents and it cuts off. Can't even carve foam.

@CarvingFusion

4 жыл бұрын

Lol yup

For stone carvin can ...

@CarvingFusion

7 ай бұрын

Lol ok

@numeouno2213

7 ай бұрын

@@CarvingFusion i mean , can do it with stylo + carving stone or no

🇬🇧🌟⭐️🌟⭐️🌟🇨🇦

carve a shark

Carve a knome

@CarvingFusion

8 ай бұрын

What's knome

@mikeschmidt5115

8 ай бұрын

@@CarvingFusion had a brain cramp,lol. Gnome out of the blue resin

Lol this is comedy at its finest. This dude doesn't know his ass from a hole in the wall!

@CarvingFusion

3 жыл бұрын

Lol sure thing go get urself a stylo feather hands

Why do men always open boxes so stupidly. 😂🤦🏻‍♀️

Why do you rip the box open and destroy the box! Terrible Useless Video?

@CarvingFusion

2 жыл бұрын

Because I can