I did not understand it when my teacher explained it once , this helped alot. Thanks!

@AllinOnesujay

5 жыл бұрын

Welcome..

@helina_2261

4 жыл бұрын

Yeah me too... I even got a headache then :

@vikashnaga1998

3 жыл бұрын

@Taurus Capricorn Zzz

@vikashnaga1998

3 жыл бұрын

@Taurus Capricorn z

@lebowize3444

3 жыл бұрын

The crazy part is that he's not even speaking English

The looks of all these geometry sets gives me childhood memories.

Who else has engineering drawing exam tomorrow?

@Ilbt80085

4 жыл бұрын

Me

@GoldenMusicTaste

4 жыл бұрын

I got it in 2 hours

@helina_2261

4 жыл бұрын

Hahaha no it's just a homework

@abdulhalimali1642

3 жыл бұрын

me🙂💔

@tlamelokgalalelo7836

3 жыл бұрын

In 2 hours

Nice job. Despite this being the best way of drawing an ellipse... it is not a true ellipse. The radius drawn at each axis is not a true representation of the actual elliptical shape. This ellipse is drawn with (4) radii, with (2) sets of (2) similar. Draw this, then scan it. Import the scan into any graphics program. Then, draw the same ellipse, with the ellipse tool. Try to get them to match. Close, but no cigar, because there are no parts of a circle, in a true ellipse. I remember doing this in my first year of mechanical drafting. we didn't even have computers yet. But it was still cool.

Great video thank u for the instructions I used it and drew the perfect elipse

Me in 2020!!! Thank Goodness! I’ve found the right video for this🧡

Thanks man. Im writing a test tomorrow and this really helped

Beautiful. With respect, this is a close approximation of an ellipse, not an exact ellipse. Great demonstration however.

@AllinOnesujay

5 жыл бұрын

Thank you

@MrPanama49

4 жыл бұрын

can a true ellipse be made with compass and rule?

Very well explained sir! Thank you so much sir. Today on our zoom class our prof. taught this one topic but due to network problem I didn't understand but because of your video I understood and also drawn it for my assignment 😃

@AllinOnesujay

4 жыл бұрын

Your are welcome..

Thank you so much! I really needed this!!

@AllinOnesujay

5 жыл бұрын

Welcome..

Thank you so much for this contruction help

Hey Bro thank you very much you saved our life with this video 😂 tomorrow we have an exam and the ellipse it was so hard to draw b4 we saw your video and now it is so easy thank you from Control & system department All love ❤

U made it so simple. Thanks bro it helped me alot

@AllinOnesujay

5 жыл бұрын

Welcome..

I didn't understand the language but understood the steps and the process very well thanks a lot Bro 😉🙏🏼😉

Thank you, very helpful ❤️

Helpful and simple👌👌 good work 👍

Thanks! Brilliant Method! with much more accuracy.

@joancoleman2088

2 жыл бұрын

I'm just trying to draw a flower in perspective.

I understand this think clearly. Thank you sir..

Thank you from Australia

@AllinOnesujay

5 жыл бұрын

Welcome..

bro nice keep it up

My teacher can't explain it properly so now I'm here

Me learning more in this video than my module af THANKS A LOT

Well done!

Thanks sir for this video ❤️

God bless you 🙏

Who else an engineering exam on 1 march 2021????

@zodwadinahrawu5328

3 жыл бұрын

Mines tm bruh 💀

Very elegant .... thank you.

Helpful👍🏽thank you once again

thanks! but how can i produce 15.5 by 9cm ellipse? I can’t figure it out but this process is so helpful

Thanks god bless you bro ❤️🙏😊

Super explanation sir

Thanks sir best information Very very thanks

Very much thanks bro😎

Amazing explanation

Thank you so much

Nice Video Sir #itiskillindia

👌👌👏👏👏👏👏👏👏👏

thanks From Bangladesh

@AllinOnesujay

4 жыл бұрын

You are hearty welcome...

Great job. The handpan has different elliptical shapes. How do you know which note you draw?

Thank you sir....

Thank you so very much ellipse

Excellent 👍👌😀

eish thanks man this was really helpful

Thank you very much sir🙏🙏

👍👍👍

Thanks for your help

Thank you sir ❤❤❤❤❤🎉🎉🎉🎉🎉

thanks broh!

Good Job

This is simplest way to draw ellipse

Shout out sa mga block 5 Architecture whooooo

Many many thanks 🤗🤗

Thank you sir. It helps me lot......

@AllinOnesujay

4 жыл бұрын

😮

Thank you! Your so helpful. :)

Thanks bro

Nice

Thank you for your help

It's helping me

you've really helped me a lot. thank you so much. @All in One Sujay

Very good 😘 ❤ ❤ ❤

@vipinkumarpatel4711

4 жыл бұрын

Aaj ma pepar achachha gaya

Mast

Wonderful

Thank you soo much

There’s a simpler way

Thanks

❤💯thank u

Thanks Sir❤

Hello sir what is this channel for ed. Subjects

@AllinOnesujay

5 жыл бұрын

Specially engineering drawing..

@lovestatuslovely

5 жыл бұрын

OK sir tq

Thank you so much sir

@sachinhargaonkar6224

Жыл бұрын

रेचझघझच

Thanks sir

Is approximate method and four center method is same

Awesome

aj ki saam all in on ki naaam

very very good

Yes. Now i know. Making eclipse or drawing only need *Common Sense*

Use full the method sheetmatal job layout need

thanks for your sir

شكرا

Sir Ye only 4 method me hota he

I have test rn

Exam in the middle of quarantine 😥

@nasty2207

3 жыл бұрын

Exactly i have today

Thenk you sir

In my paper it qus was come

Please tell me the method how you are holding the camera,as i myself give lecture and it becomes very difficult to hold and also i dont get any idea

@AllinOnesujay

2 жыл бұрын

Camera stand

❤

Tq bhai🙏

The voice is not audible clearly please improve it

@AllinOnesujay

5 жыл бұрын

I am really sorry..

@AllinOnesujay

5 жыл бұрын

This happens because of my video editor..

Last na to ngayong 2020 HAHAHAH

yes but this is not an ellipse -- it's a four-arc curve

@oosmanbeekawoo

4 жыл бұрын

I know, but it's a super useful approximation because you can get tangents much more accurately than the 'freehand sketching' method. I'm taking an Optics class so...

3:20 i got lost, what is the measure of that

@AllinOnesujay

3 жыл бұрын

Take any measurement slightly less then AQ.

@vincemaminta9517

3 жыл бұрын

@@AllinOnesujay Thank you Very muuch!

Sir exam kitna center tak ke aata hai

Sir aavaj bahut kum aa rha hai.

Major axis 120mm and minor axis 60mm using four center method

@AllinOnesujay

4 жыл бұрын

Use the same technique. Just draw the CD as 60mm

Hello sir welder relative qutions hai kya

@jitendramarei2434

2 жыл бұрын

Hello sir ES class questions and ans send kera

How to draw hyperbola eccentricity

@AllinOnesujay

4 жыл бұрын

I don't understand

"दाजु राम्रो छ मैले यस भिडियो बाट केहि सिक्न पाए खुसी छु।" Translate it into google Nepali-Hindi translation and am waiting for your reply ❤️🇳🇵

Major axis हमेशा horizontal line पे ही लेना चाहिये क्या sir

@AllinOnesujay

2 жыл бұрын

Nahi.

@sumit_w_22

2 жыл бұрын

@@AllinOnesujay konse bhi axic pe jamega

I didn't understand my AB line is 8 inches where should i mark my c d on 90° line?????

@AllinOnesujay

4 жыл бұрын

CD line is also given in your question..

@gyanprakashnirwan5150

3 жыл бұрын

स्केल की सहायता से 8" की AB लाइन बनाएं,4"पर एक मार्क और करें व इसे 0 नाम दें।अब प्रोट्रैक्टर के मध्य बिंदु को 0 पर रखें व उसकी आधार रेखा को बराबर A व 0 पर रखें।A तरफ से प्रोट्रेक्टर के अंकों को पढ़ना शुरू करें जंहा 90⁰ आयेगा उसे पेंसिल से चिन्हित करें। प्रोट्रैक्टर को हटाएं अब चिन्हित की गई जगह से 0 को छूती हुई एक खड़ी लाइन खींचिए यानी ये '+' निशान जैसी होगी इसे C 0D नाम दीजिए।यानी आडी लाइन जो 8"की है वो A0B होगी और खड़ी लाइन C0D होगी जिसकी नाप का उल्लेख आपने नहीं किया।धन्यवाद

Bhai voice thodi slow thi

@AllinOnesujay

4 жыл бұрын

Sorry for that.

so you are from west bengal right?

@AllinOnesujay

3 жыл бұрын

Yes..