Hi There. Just found this video leading on from the R500/A610 comparison. Love the detail you go into, great video. Just bought one based on what I've seen here. Just hobby use so can't spend money on kiwami, which i would love. Many thanks for your efforts. As a side note, I've been using a R500 which i found awful! Your video explaining the real CFM of this gun i think explains it. Bigger compressor output purchased now.

@peteshobbies5383

12 күн бұрын

Hi Dominic, Good to hear you found the video. This is a pretty new gun, so there's not much about it, but I think you'll find it much better than the R500. The R500 needs around 2.5 bar, so 36psi for a clear coat, and at that, it's up around 8 to 9 cfm, much more than is advertised. You can normally get reasonable results with them, but if your compressor is struggling, you may find the pressure drops, which will cause loads of problems, that's where diaphragm regulators come into their own. Good to hear you found us anyway, I'm a bit of an eccentric but takes all sorts to make a world, right 😂 , cheers mate 👍

@0012dominic

12 күн бұрын

Haha, it certainly does. You need to make a video on how you made the 36 hour day! How do you fit it all in. Thanks again 👍

@peteshobbies5383

12 күн бұрын

@0012dominic Certainly seems like that sometimes 😂, cheers mate 👍

Nice finish my friend, the guns should last a reasonable amount of time. As you mentioned, value for money, for $100 bucks, if it lasts even five years with a moderate amount of use, should be worth it. Cheers

@peteshobbies5383

23 күн бұрын

Hi Bryan, I think at this price point, it really is worth taking the chance 😀, Have you received your Sagola yet ? Cheers mate 👍

@bryankelley6687

22 күн бұрын

No Sir, not yet. I ordered two different, a 4100 pressure pot gun, and the 4600, one of them is on back order. Hope they will be in soon

THANKS FOR THE NEW VIDEO MATE❤

@peteshobbies5383

23 күн бұрын

Hi Lesli, you're welcome, mate 👍

I a retied auto refinisher started at 14 doing motorcycles and is were I got my love of spray painting from, it did teach me the basics and when I was 16 got a apprenticeship as furniture polisher ie spray paint furniture which is where I got my indenturers at 21, I got a job as auto refinisher (glorified spray painter) and worked their till a motorcycle accident 2014 when I retied due to breaking my back at 54. I now make guitars and do the odd respray, I've been buying spray guns since I now have about 25 of them and as many again I use for parts but some are over 30yo and wearing out, i use about 10-15 at the same time for different colors so I don't haft to clean 1 out after each process, I do a lot of Candy and nitro, acrylic and 2k clear MS & HS I'm now buying guns to see what Good and cheap then ill buy 5 or 6 of the best one I just got a NVE and a R500 and I've got a Saigaole 6800 still on the way. I use to be a spray gun snob but After testing the NVE and the R500 I must say I'm very impressed with them both the R500 is a great primer and acrylic gun doesn't use a lot of air, the NVE blew me away at how can a $70 spray gun spray as Good as it does and atm is the front runner but ill wait to see what the 6800 is like as I got it for just $45, I will buy a couple of R500's but I will buy 5--6 NVE's pending on the 6800 is like as I've heard really good things about it, the R500 cost me $35 I can buy 10 NVE's less than a SATA or Devilbiss and get just as good results I thank you Pete as I wouldn't have know anything about them and would have wasted thousands on a few SATA, Devilbiss, or even IWATA, what your doing is needed to get the word out about them while you do some strange things like microwaving your paint lol but I guess your in the UK wheres always cold, but you don't haft to be indentured to spray paint. I know a Young Black guy who's self tort and he's 1 of the best I ever seen thanx again buddy👌

@peteshobbies5383

23 күн бұрын

Hi Mate, That's some time to be in the business. Hat's off to you, sir 👍 Yeah, in the UK, 70f is a heatwave 😂 so most of the time, we are in less than ideal conditions. You say you're now into guitars, it surprised me how many people that watch this channel are guitar finishers, something I never thought of, I keep meaning to pick a few old ones up and experiment with then, would be a chance to see how I would get on I guess. Thanks for the kind words, buddy. I'm always looking for something that works well but isn't expensive and finding some little gems on the way, its good to hear you're enjoying them as I genuinely enjoy making them, take care mate 👍

Hi Pete, a very enjoyable video mate as you know I love your vids so please keep making them👌🙏once again you have another great gun in your hands which again has made me want to get one😁I've just decided which gun to get next then you go and throw this into the mix🤔🤪😂 The finish from the Dram is spot on mate even the basecoat went on as good as most guns and I could tell that the clearcoat went on with very little peel, I'll add this gun to my ever growing list of guns I want (not need🙄). I take it you have seen that the new Multi Mix UHS clear is now available, this will be an interesting clear as it's a single visit but still giving a good build, the downside is there isn't any sample or small kits available🤦‍♂ Thanks again Pete👍

@peteshobbies5383

23 күн бұрын

Hi John, This is a fairly new gun. In fact, I don't think there are any reviews of it on KZread, mainly because no one has heard of it 😜. It's very good and only around 88 USD at the moment, I suspect it's out the Avalon factory in Taiwan, but I can't be sure. Yes, I've seen the Multi Mix C4. I haven't looked into it yet as I still use different clears up. A one stage clear should make it easier to use, there's a few clears like that but I haven't used any of them yet, are you getting some ? Cheers mate 👍

@bosshawg7427

22 күн бұрын

Will be looking forward to you testing out the Dram as well.

@JohnWD40TC02

22 күн бұрын

Hi Pete, yeah I had a feeling it was new to the market even though it's made in Taiwan it does look good quality but I think my Fuji was made there as well so they seem to turn out good guns but not as good ad Japan seems to👍 The MMC4 does seem to be good clear but I'm wondering how well it will cure without a bake cycle, I'm hoping to try it mate but it's a bit pricy if it's not suitable for the likes of us, I did ask Jordan if it would be ok but as usual he didn't reply to my comment on his group🙄🤦‍♂👍

@peteshobbies5383

22 күн бұрын

@JohnWD40TC02 Hi John, Yes, the Fuji is made in Taiwan, and that's also well made, so hopefully, this Dram will last a while 😀 It's not good form to launch a product and not answer questions, especially as through your Instagram account, you publicise the product. It will be fine to air dry. It will probably take longer, but I can't see why it wouldn't cure. Cheers, John 👍

Pete good video thanks for sharing that information don't you ever upload any videos with you doing the preparation work on car parts and motorcycles stuff 😊

@peteshobbies5383

23 күн бұрын

Hi Andy, there is some from a wile ago doing the preparation buy most people don't want to see it

@ANDY-we7mr

23 күн бұрын

@@peteshobbies5383 yes well I do pete its not all about painting all the time

@peteshobbies5383

23 күн бұрын

@ANDY-we7mr Yes, agreed mate, the finish is only ever as good as the preparation 👍

Petes probé la pistola dram con la boquilla de la wider 4l y lo que ví fue que el abanico es en v y con la boquilla original de la dram es como en u , otra cosa que ví fue que la boquilla de la dram puesta en la wider 4l sobre sale mucho la punta y con su boquilla original queda más al ras

@peteshobbies5383

8 күн бұрын

Hi mate, I haven't tried swapping nozzles over in the different guns yet, but I will get around to it

Thanks, Pete!

@peteshobbies5383

23 күн бұрын

Hi Mate, Your most welcome 👍

You're making me happy this weekend, Pete! 😂 I didn't expect you to review it so quickly, but I am glad you did. I haven't gotten a chance to play with it yet, but it appears it definitely was a good buy. The overspray did seem a bit more than say a LPH400, but nothing too excessive compared to a conventional tip gun spraying a HS clear. Metallic basecoat looked to lay nice with the extra atomization without you having to do a drop coat. At least I don't think I saw you do one. That's great. When you heat up the Upol, does the viscosity come down to a medium solids level? Just curious for comparison as that's what I use sometimes. I have both MS & HS in Upol to play with.. I'll be testing both soon. Keep up the great videos & reviews!

@peteshobbies5383

23 күн бұрын

Hi Boss, I've hardly ever used any MS clears, so I'm not sure if the heated Upol would be equal 🤔. It's certainly a good gun, obviously I'm not sure on longevity but I'm not expecting any problems, I go this out quickly as I've had many messages on Instagram asking about it, to be honest, it's a bit af a find 😀 Let us know how you get on with your when you get a chance 👍

Thank for another great video. One question I have…after watching your video on regulators, I picked up the Meji like the one you are using. I noticed that you don’t lock it down after you adjust it. Since I’m new to these, is it not necessary or are you just that good at not screwing it up? Thanks bud. Always enjoy

@peteshobbies5383

23 күн бұрын

Hi Scott, they are lovely little regulators, aren't they 😀 I always used to lock it, but I've since found it doesn't move anyway, so it isn't needed, I guess if your hand or arm is often coming in contact with the adjuster then it's worth locking it, but certainly for me the pressure doesn't change, cheers mate 👍

Good review, mate!

@peteshobbies5383

23 күн бұрын

Hi Benjamin, Thanks mate, hadn't heard of these, but I thought I would give it a try. I'm glad I did as they perform really well, cheers mate, appreciate it 👍

@benjaminchu6699

23 күн бұрын

@@peteshobbies5383 I think it performs ok, it might be slightly inferior comparing to the Iwata? And appreciate for your hard work, mate!

@peteshobbies5383

23 күн бұрын

Yes, it's probably not as good as the WBX, but it's not far off it, and it looks well made. Time will tell 👍

Thank you Pete, Never heard of them, seems OK. Homage to a Anest Iwata. Stick to the guns that I know. Hmmm. food for thought.

@peteshobbies5383

23 күн бұрын

Hi Mate, I hadn't heard of them either, but I was a little intrigued , I think they come out of the Avalon factory in Taiwan but I'm not sure, they certainly perform really well and are responsibly priced, thanks mate 👍

Amigo Petes esta pistola dram estara hecha por Avalon? Ya que el vaso que incluye esta marcado Avalon en la parte de arriba por eso mi duda?

@peteshobbies5383

10 күн бұрын

Hi buddy, I think it may be, but I can't be sure. As you say, the cup is marked Avalon, but there's nothing on the gun

Nitro thinner? I save that one after cleaning for cleaning putty tools. 😁 it doesn’t matter if it’s full of paint crystals and some dissolved clear.

@peteshobbies5383

23 күн бұрын

Hi mate, I never used to save any but it certainly works and saves money 😁, cheers buddy 👍

Have you noticed any difference between the Iwata tulips spit tips like the lph400 lvx that has 4 cuts outs in the tip as opposed to the 3 cut out like in the Kawami 3 ?

@peteshobbies5383

22 күн бұрын

HI mate, someone asked exactly the same thing in the comments. Normally, the 3 splits run faster, which makes sense as the split tips definitely slow guns down. It's why I know some put a 3 split in their LPH400 to speed it up. Also, a 4 split can often be used at lower pressures, not always. The WS400, for example, is 4 split tip but runs at 29 psi 👍

Jajaja nada de eso amigo 😂 Petes si todos pudiéramos comprar las mismas armas que tú tenlo por seguro que las compraríamos o al menos yo si jejeje saludos

@peteshobbies5383

23 күн бұрын

Hi mate, I just can't help myself 🙄 😂 , cheers mate 👍

I pqinted a bike with clear intercoat and epoxy color pigment it took like 8 coats and i got mottling

@peteshobbies5383

23 күн бұрын

Hi mate, You can get that if your overlapping isn't correct, Candy can be difficult to get right so it just takes practice. Keep the overlapping around 75% , distance and speed the same all the time, that should do it 👍

@damensutherland7081

22 күн бұрын

Yea it was on bicycle frame it would been easier if it was on more flat surface that i could also work the gun around bit it was a good learning experience i guess i gotta correct few things .im going to get regular paint next time and hopefuly it want mottle

@peteshobbies5383

22 күн бұрын

@damensutherland7081 Yeah, candy, by its very nature, obviously relies on even coats. The more you put over one area, the darker it gets in that area, which obviously shows afterwards. You will get there. It just takes time and practice , cheers, mate 👍

what is a 2k thinner.....?

@peteshobbies5383

18 күн бұрын

Hi Mate, If just the name many people in the UK use to describe virgin thinners, so not cleaning thinners