Dr.Z Suzuki Samurai Yj Kit Install
In this video I show you How to install my yj kit on your samurai. This video just shows you just how to install the brackets and springs. An get it back into a roller.
If you wanna buy my kit check out my Website drzfab.com
Any questions Email me dr.zfabrication@aol.com
Пікірлер: 89
Think you have yourself a new customer will be ordering everything I can get my hands on awesome fab 🙏🏼
Wow this video deserves more views. Thank you for the very informative video!
Very nice and detailed video keep up the good work hats off to you for the effort making such a helpful video
Awesome. I need to buy a kit!
Bro... I appreciate alot your spring hanger bracket and shackles 👌👍
That bumper is nice!Need some of that!
Awesome video I just got my first samurai it’s a tin top Just like this one im looking into ordering the compete yj spring swap and spoa kit from you
Doing spring over axle but still the most in-depth lift video out there.
@DrZFabrication
4 жыл бұрын
Only difference is installing spoa pads an high steer
Great video!
I have this kit set up spring under. Could you go over moving the axle back one inch? There are two holes on the leaf spring mount and 3 holes on the u-bolt plates. Could you talk about each and how they make a difference?
Does this kit on sping over and sping under? I have one with sping over and my dad drives one spring under. Best little wheelers ever.
your video very intesting.. will this lift kit can be used on jimny 1990 JA11 right hand drive? thank you..
I will be ordering soon
Hello friend, what car (brand, model and year) are those spring leaves that you put in the suzuki samurai? Thanks for your videos
please tell me that you make this kit for samurai long wheel base as well!
Cool vid , make me want to buy a Sami
Great job man
@DrZFabrication
Жыл бұрын
Thanks
Hola buenas tengo una pequeña duda con las piesas que se les pone a las hojas de resorte tengo unas pero es diferente la forma pero si son de la misma Z y queria saber si me puede ayudar porque se los quiero poner a mi carrito
Hello Dr z. Can I get the measurements for the yj conversion brackets
Sweet video as always. Very informative! Have you ever done any body panel work? My samurai has some pretty decent rust and I'm just about to dive right into it. The issue is finding 18-20 gauge sheet steel around me. It's going to be a very crude/military/offroady style build so I'm not looking to restore it..
@DrZFabrication
5 жыл бұрын
I used 18g when I was doing some body work on one. I also used .023 welding wire too. It helps a lot when doing sheet metal work.
@bumpersandbearings8410
5 жыл бұрын
@@DrZFabrication Where did you get the 18g from? Trying to ship it is ridiculously expensive
@DrZFabrication
5 жыл бұрын
I have a local steel company I buy from. I know Home Depot has some small pieces of steel or even Lowe’s.
Graet video. How bad did it hurt flex?
Hey I have a daily driver Samurai. I'm really interested in this upgrade. The stock setup has very little body roll in turns (I love this). How does this upgrade do in turns, body roll wise?
@DrZFabrication
4 жыл бұрын
I personally haven’t put many miles on this kit on the road. I mean it’s not gonna handle like a nascar. It will prolly give some Body roll depending what springs you run an how many leafs are in that pack.
You mention adding a drive shaft spacer for the front, but is it needed in the rear as well? Also, I’m assuming you used stock height yj springs for this rig.
@DrZFabrication
4 жыл бұрын
stock springs. rear isn't needed unless moving the axle rearward.
I put a YJ spring over with Toyota axles with 33 inch tires and used the samurai rear drive shaft but have vibration what do you think I need
@rogeroday9408
3 жыл бұрын
You need to first check your U Joints install. Hard to mess up on a Sammy, but that’s the quickest check.
@DrZFabrication
3 жыл бұрын
how's pinion angle
what up, fixin to buy a kit and got a question for ya-when doing spoa would i need to cut more out of the new perch on the larger side of the axle
@DrZFabrication
5 жыл бұрын
Check out my spoa perches. They slide right on. Drzfab.com
Hi, One question, where do the shocks go after this? The front shock mounts
@DrZFabrication
4 жыл бұрын
Watch my shock tower video. Will give you a idea where to place thenlower mounts
Does this lift affect anything with the steering? ( such as shaft length)
@DrZFabrication
4 жыл бұрын
as far as steering shaft no. if you go with taller springs it will mess with the steering little since its putting the drag link more on a angle.
good shit
The bracket that I got for the back has two holes to receive the leaf spring what it the purpose of it
@DrZFabrication
3 жыл бұрын
there so you can move the axle rearward if you want.
Why did u put the leafs on the bottom of the axels ? And why now yota axels?
@DrZFabrication
4 жыл бұрын
Drives better an also keeps the weight lower. I don’t need Toyota axles for 32s. I do plan to do toyota axles on my other tin top. My plan was just to keep this one a very mild wheeler an street rig.
With the Missing Link on the front, is there any or how much body roll?
@DrZFabrication
12 күн бұрын
When it’s spua very little body roll.
Do you need to add shaft extensions and something for the steering?
@DrZFabrication
5 жыл бұрын
Driveshaft spacers you mean? Then yes. The stock steering will work for the time being on spua setups on stock yj springs. If you go spoa you will need high steer. If you do 2.5” lift springs spua I’d still do high steer. Stock steering will only take so much abuse before it bends or breaks.
Front tire are no more centered with the fender well the rear mount should be located some inch back
do you have to remount the rear shocks?
@DrZFabrication
4 ай бұрын
Yes. Just need lower shock mounts I kept Mine in stock upper location
How much for the kit + the U bolts? Do you have a link to order?
@DrZFabrication
3 жыл бұрын
My website drzfab.com
Good for basics ..... But we all know there is way more to than just leafs....🙂.
Does this yj conversion but spua any mods need to do to the frame and steering?
@DrZFabrication
4 жыл бұрын
For spua you don’t need steering unless you go higher then stock yj springs.
@rafaeltorres678
4 жыл бұрын
The stock is 2.5 lift for suzuki samurai ? And do you ship to philippines
@rafaeltorres678
4 жыл бұрын
I have a longer wheel base samurai and thinking to swap new suspension ome or yj conversion
@DrZFabrication
4 жыл бұрын
It’s prolly pretty expensive to ship over seas. Everytime I Try it’s easy $150 to ship.
Smile grumpy
Do u do the installation? If I buy this product? Like If I take u my samurai
@DrZFabrication
3 жыл бұрын
we can
Would have been nice to see how the front shackle bump stops mount up. Doesn’t show in the video. I bought the kit and can’t quite figure it out.
@DrZFabrication
3 жыл бұрын
they slide in the front frame rails.
@maddawg4599
3 жыл бұрын
@@DrZFabrication thanks. So does the front bumper need to come off as well? Which one is L and R? Would be nice if they were marked.
@DrZFabrication
3 жыл бұрын
@@maddawg4599 email me I’ll send pics. Dr.zfabrication@aol.com
塗装せずに組み立てるんだ?
Do you still make the YJ kit? if so what's the price? thanks
@DrZFabrication
Жыл бұрын
It’s on my website drzfab.com
How much did it cost? The lift kit
@DrZFabrication
4 жыл бұрын
It’s on my website drzfab.com
where can i get that kit It would be to send to Colombia and what cost does it have?
How much wheelbase do you gain going with yj springs???
@DrZFabrication
Жыл бұрын
2” front an rear can be moved rearward a 1”. Hard to go further with stock steering box location an gas tank.
@nurseboy6969
Жыл бұрын
Thanks for taking time to answer my question! Love your channel! You are awesome!
@nurseboy6969
Жыл бұрын
I'm having a lot of trouble trying to get my Samurai to run right. My carb died, and I put a Weber carb on. I never could get the Weber to work. Would you suggest a CV carb, a Toyota 3K carb or propane. I've been thinking of trying the gotpropane kit. What has worked for you best in the past??? Just trying to pick your brain. Thanks!
@nurseboy6969
Жыл бұрын
I drive my Samurai mostly offroad. The Weber stalls at just about any angle. It hesitates if you hit bumps too fast. And, it likes to flood if I stomp on the gas. The Weber really takes the fun out of the Samuari! The Weber definitely takes away from the awesome capabilities of the Samuari!
@DrZFabrication
Жыл бұрын
Out of all them I would pick propane. If it was a daily driver. I would go fuel injection which you would have to do a motor swap.
this is not the same suspension lift! it is necessary to initially make a body lift, here the propeller shaft does not work correctly ... need to lower the transfer case
How did you get that kit?
@DrZFabrication
4 жыл бұрын
Drzfab.com
@eduardocuadralopez2062
4 жыл бұрын
@@DrZFabrication Do you ship to Colombia?
Ok now you need 37 inch tires ha ha.
@DrZFabrication
4 жыл бұрын
not for this one.