DPF Filter Cleaning, How To Clean DPF With Motor Power Care DPF Flush Liquid, Easy In House Cleaner
Автокөліктер мен көлік құралдары
How To Clean Diesel Particulate Filter Using MotorPower Care DPF Flush Liquid:
1- Remove the diesel particulate filter from your vehicle.
2- Seal one end of the filter or place it in a container that can fit the DPF cartridge.
3- Pour MotorPower Care DPF Flush liquid into the filter and let it soak for 10-12 hours. Shake the DPF every few hours during this time.
Note: (Make sure both ends are sealed or the container is closed tightly to prevent evaporation).
4- After 10-12 hours have passed, remove the filter and save the liquid in a bucket for future use.
5- Thoroughly wash the filter with clean, warm water.
6- Reinstall the filter on your vehicle, add MotorPower Care DPF cleaner additive (804 or 808) to the diesel tank, clear filter codes, and it is recommended to force regeneration through a shop scanner or by taking a 30-minute drive on open roads
also available amazon: www.amazon.com/stores/MotorPo...
ebay: www.ebay.com/str/motorpowercare
Пікірлер: 27
I would like to see before and after flow numbers
Correct
Will this work for the SCR?
The big trucks are easier but I've been cleaning lately a few on 2016 duramax and 2021 Ram and I haven't found a good soap or solution that helps I cut them open then pressure wash them all DOC,DPF,SCR and just a good 2600psi or higher pressure washer and the results are amazing 10 out of 10 so I would be skeptical of using this cleaner fluid and no pressure washer, I've been using just hi pressure water with no solutions and it works, once I'm done I weld everything back up
@wannaPreG
3 ай бұрын
You mean a mere high pressure water washing will clear all the soot , I thought without the chemical if you wash it it won’t go, please make some video in your next clean up and post it here let see
I took my out took it to the carwash use the high pressure hose and iam good
@motorpowercare
9 ай бұрын
If you have soot, power washing it alone will not clean the DPF.
@chevellebelair1402
4 ай бұрын
@@motorpowercarewill this work for the SCR?
@fix-and-drive-diy-repairs
Ай бұрын
High pressure wash works all the time for me.
LOOKS LIKE IT'S 50% BLOCKED :D ANYWAY THIS SHOWS NOTHING. YOU SHOULD MEASURE DIFF PRESSURE.
So what happens to the used cleaning solution and sludge that's left? does it just get dumped? Does the cleaning solution contain any harsh chemicals that may cause the substrate to break down or pit ??
@motorpowercare
Ай бұрын
The unique formula of our DPF flush liquid is designed for multiple uses. After application, allow it to settle in a bucket, the carbon, soot, and ash will sink to the bottom. Carefully drain the clean liquid into a new container, leaving the dirty layer behind. Dispose of the remaining residue as you would with oil. This method ensures you get the most out of our product.
Does this cause your truck to sputter ?
@motorpowercare
7 ай бұрын
Thank you for your question! Our MotorPower Car DPF flush liquid is designed to effectively clean and maintain the Diesel Particulate Filter (DPF) without causing the truck to sputter. When used as directed, it can help improve the overall performance of your diesel vehicle by reducing emissions and restoring optimal airflow.
Is this safe for catalytic converters
@thecatchchanel
7 ай бұрын
Yes, it is safe to catalytic converters.
Why not blow it out first and the add the liquid
@zekibaser5969
9 ай бұрын
and wash with water than first
No need to bake it?
@motorpowercare
4 ай бұрын
No baking needed! This replaces the baking process.
uhm, you cleaned it the wrong way
@truth.hurts...
Ай бұрын
Did he
@ranxerox10
Ай бұрын
@@truth.hurts... yes the ash can only come out one way.
@truth.hurts...
Ай бұрын
@ranxerox10 I'm about to do this next week how do you do it
a crowbar is all you need!
I'd not a rinsed it out . Put the solution through jet wash .