It's been 20 years since i retired from the patch And i still miss it!
@kd5ozy6 жыл бұрын
Watching the grass grow
@roballan4944 Жыл бұрын
I have never seen an enclosed rig like this before. Canadian Arctic winters and wide open to the elements. Why is this connection take so insanely long? Why not just use the power head to run the pipe? No power table?
@jacoblagrone30713 жыл бұрын
question.. how do they fish that if it falls downhole with that thread protector in it?.. doesnt that make screwing back in a lil problematic
@jarredleis167 жыл бұрын
I have never seen a slower way to run casing
@tooterturtle7849
5 жыл бұрын
Yeah I agree but derrickhand doesn't have to hold casing
@BiggRude02
5 жыл бұрын
@@tooterturtle7849 they don't have to anyway with a top drive. Usually only with hanging blocks
@rl2478
5 жыл бұрын
Tooter Turtle this is 7-5/8” VAM Top they need to follow up VAM make up speed
@user-oh7cm7cn3f5 жыл бұрын
汽機車更換的廢黑油.能再提煉嗎??
@18spd4Life3 жыл бұрын
Thanks I always wanted to see this process in slow motion, most of these guys are just to damn fast lol
@MeloFever4 жыл бұрын
Omg how long does it take to do a job that way holy shit
@bijoyram90795 жыл бұрын
Vari nayes video osm job
@juanjosecamarillonava33246 ай бұрын
I have an experience with crt tools and cdt but, this is absolutely slow motion most of the others crt or cds tools can run casing faster than the conventional way.
@viarnay2 жыл бұрын
very neat and safe :- D
@Riyanmurtijaya703 жыл бұрын
good success always
@user-ib5ry5rw1l5 жыл бұрын
Very nice
@salhalmhdawy1235 жыл бұрын
ربي يعاون
@ismailsayah6245 жыл бұрын
it takes more than eternity to run a joint
@epistte
6 ай бұрын
You could smoke a faster faster than they are running one.
@darksouls13815 жыл бұрын
what is this is very slow working
@chunkymonkey4326Ай бұрын
Damn!!! I hated jobs like this stabbing guide,stabilizer,chain tongs. Probably filling every joint 🤦♂️
@Aklovelivesnowboard5 жыл бұрын
The benefit of a CRT is the ability to pump and rotate casing, even drill in some cases. That allows you to get casing to bottom much more easier. My question is why is he clutching the drawworks like that while he is engaging CRT. Someone needs to show him how to stall it out and use the brake handle.
@kenmoore957
4 жыл бұрын
2 levers on that rig lever A (brakehandle) and you lever B
@kencline6666
Жыл бұрын
Controlling the SOW as it engages
@timothymullins31375 жыл бұрын
good way to lose your fingers and being on the bottom of that jail fight like that
@dylanlemoine53214 жыл бұрын
I wanna get on the rigs so bad I’m only17
@georgecarrera18
4 жыл бұрын
When you turn 18 get on indeed the app and find oil work roustabout floor hand ect
@fx.suratnokukuh91505 жыл бұрын
Thanks to lord... Thanks to Allah for this earth... For strong people like them...
@fabianflorez5233 жыл бұрын
must be nice for the pipe rollers plenty of fuck off time but it would get old driller probably had a heart attack by the end of the video or died of boredom
@parientelujan54685 жыл бұрын
Hope you guys are getting pay by the hours not by the foot 🤐
@ralphaverill20015 жыл бұрын
Is this a government contract job? My 90 year old mother could beat these guys.
@vicoreynosa8315 жыл бұрын
Where theres h2s monitors
@DavidJones-sq4xs
4 жыл бұрын
Some locations you don't need them
@zachreyes6444 жыл бұрын
Lol.......3 hours later.......😂
@kenmoore9574 жыл бұрын
Guys r slow we used to rope it in with cathead way faster
@joshlowery27705 жыл бұрын
lol
@tomcroze43715 жыл бұрын
Schlumberger is best company for oil services at the all worlds
@darksouls1381
5 жыл бұрын
No it's bhge company is the best
@user-ft9ug2bc8m4 жыл бұрын
太慢了
@davidbradley61792 жыл бұрын
Looks pretty stupid I could’ve ran five joints in by the time you did one. Good example how the oilfield is getting dumb down
@kencline6666
Жыл бұрын
When you take the time to do it right with premium thread you won’t be working this well over in 2 months
Пікірлер: 44
It's been 20 years since i retired from the patch And i still miss it!
Watching the grass grow
I have never seen an enclosed rig like this before. Canadian Arctic winters and wide open to the elements. Why is this connection take so insanely long? Why not just use the power head to run the pipe? No power table?
question.. how do they fish that if it falls downhole with that thread protector in it?.. doesnt that make screwing back in a lil problematic
I have never seen a slower way to run casing
@tooterturtle7849
5 жыл бұрын
Yeah I agree but derrickhand doesn't have to hold casing
@BiggRude02
5 жыл бұрын
@@tooterturtle7849 they don't have to anyway with a top drive. Usually only with hanging blocks
@rl2478
5 жыл бұрын
Tooter Turtle this is 7-5/8” VAM Top they need to follow up VAM make up speed
汽機車更換的廢黑油.能再提煉嗎??
Thanks I always wanted to see this process in slow motion, most of these guys are just to damn fast lol
Omg how long does it take to do a job that way holy shit
Vari nayes video osm job
I have an experience with crt tools and cdt but, this is absolutely slow motion most of the others crt or cds tools can run casing faster than the conventional way.
very neat and safe :- D
good success always
Very nice
ربي يعاون
it takes more than eternity to run a joint
@epistte
6 ай бұрын
You could smoke a faster faster than they are running one.
what is this is very slow working
Damn!!! I hated jobs like this stabbing guide,stabilizer,chain tongs. Probably filling every joint 🤦♂️
The benefit of a CRT is the ability to pump and rotate casing, even drill in some cases. That allows you to get casing to bottom much more easier. My question is why is he clutching the drawworks like that while he is engaging CRT. Someone needs to show him how to stall it out and use the brake handle.
@kenmoore957
4 жыл бұрын
2 levers on that rig lever A (brakehandle) and you lever B
@kencline6666
Жыл бұрын
Controlling the SOW as it engages
good way to lose your fingers and being on the bottom of that jail fight like that
I wanna get on the rigs so bad I’m only17
@georgecarrera18
4 жыл бұрын
When you turn 18 get on indeed the app and find oil work roustabout floor hand ect
Thanks to lord... Thanks to Allah for this earth... For strong people like them...
must be nice for the pipe rollers plenty of fuck off time but it would get old driller probably had a heart attack by the end of the video or died of boredom
Hope you guys are getting pay by the hours not by the foot 🤐
Is this a government contract job? My 90 year old mother could beat these guys.
Where theres h2s monitors
@DavidJones-sq4xs
4 жыл бұрын
Some locations you don't need them
Lol.......3 hours later.......😂
Guys r slow we used to rope it in with cathead way faster
lol
Schlumberger is best company for oil services at the all worlds
@darksouls1381
5 жыл бұрын
No it's bhge company is the best
太慢了
Looks pretty stupid I could’ve ran five joints in by the time you did one. Good example how the oilfield is getting dumb down
@kencline6666
Жыл бұрын
When you take the time to do it right with premium thread you won’t be working this well over in 2 months
That's slower than the second coming