I have watched all of your videos and learned so much. Not a second of my time was ever wasted. A genuine thank you!

@10MinuteWorkshop

3 жыл бұрын

Thank you! 🙌👍

@geromemezo1277

3 жыл бұрын

Haven't watched all of them, still working my way through, but couldn't agree with you more when you say '' Not a second of my time was ever wasted '' A great bit of luck finding this channel for me. Cheers

@romalanmoodley8504

2 жыл бұрын

i couldn't agree anymore to your message

With years of using dowels in the past I never knew that about using the notch on the dowel guide when doing a T joint. Every day is a learning day. Nice work Peter!

@10MinuteWorkshop

3 жыл бұрын

Thanks Ian! 👍👍

@RobertLuciani

Жыл бұрын

I had the exact same "ahhhhhhhhhh ok" moment.

@paulwaite6777

7 ай бұрын

Same, fantastic!

@williamjrcartwright

5 ай бұрын

Me too! Feeling very stupid now!!

Finally Mr M shows us weekend woodworkers how to produce domino style accurate joints at beer money prices 😀 ... This is why I subscribed to the channel

@10MinuteWorkshop

3 жыл бұрын

Thanks Kevin! 👍

@bighands69

2 жыл бұрын

Unless you can reference of the edge of your panel or bit of wood it is impossible to use those little jigs accurately.

Excellent explanations, loud and clear! Great photography and editing. Thanks!

Exactly what I was looking for today! Thank you for putting this video together two years ago Peter, it's still providing value!!!

Thanks for keeping it simple.

Exactly what I needed to see before deciding which jig to buy. Always helpful and spot on.

I bought one of those about 20 years ago at a flea market for a dollar. I never did figure out how to use it properly - now I know. Thanks!

@10MinuteWorkshop

3 жыл бұрын

Thanks! 🙌👍

Thanks Peter for these tips. Just what I needed, everytime!

Excellent as always Peter.

Thx for sharing. Very easy to follow.

Always learning from you,Thank you

I have been meaning to buy a dowel jig , just a hobbyist, this is a great alternative to the festool .

Thank you Peter, very simple & clear explanation.

Made my next project so much easier. Thank you!

Super helpful for me. Thanks for posting this video!!

Great point learned from this, thanks Peter

Excellent video, to the point, thank you

That was a great video, it was certainly far better than the other videos I watched on installing dowels. Thank You. ❤

Another excellent video -as always

Really one of my favourite video about the Dowelling Jig, you covered everything

Just stumbled on this one and I'm now going to see the others. Very pleasant and very complete. Thanks.

I just already purchased. Must have in the workshop. Thanks 👍

Great vid, I’m glad I hung around till the end for the bonus tip

Great tips. Such a clever little tool!

An excellent video ... Thank you!

Blummin' brilliant Peter ... thank you so much. Just bought the jig, using your link.

A pleasure to find & learn great tips to complete accurate joints Thank You

Excellent video as always.

Great video and thank you. I just bought one of the Wolfcraft ones and the tips and tricks will come in very useful.

Great video Peter, very helpful!

Thanks, great clear communication. I intend making drawers to go under the counter in my allotment potting shed and found this tutorial helpful.

Thanks a ton. I was given one of these and I had no idea how to use it. Perfect! Many thanks again

Brilliant! Video. Had one for years but never understood it until now? Well done.

Well done directions. Made it very easy to understand. Thanks

Peter, Thank you so much for your videos. I used panel joints quite often this winter whilst constructing nesting boxes from rough-sawn cedar planks. Did so to give me the wide dimension which is hard to find with cedar lumber. Cheers from Michigan, USA.

droping the drill bit is such an easy tip i cant believe i never thought of it. Thanks!

That was super helpful!! Thank you!

Very informative I enjoyed it thank you

Thank you for an amazing video. I will be giving the a try in order to make a few basic cabinets

Thank you sir, direct to the point as I like.

Best video I've ever seen!! Amazing

Beautiful! Thank you

Thank you so much. Greetings from Spain.

This was really helpful, thanks a lot. Subscribed🙂

This video made this process effortless! I love learning how to join wood without using fasteners. Gonna get one of these jigs and start practicing this.

Brilliant video, just got a metal dowel jig, cannot wait to try after watching this. You are the best❤️❤️❤️👏🏻👏🏻👏🏻👏🏻

You, are a great teacher, cause you seem to enjoy what you do.... many thanks from Malta

I have this exact jig and have never used dowels or a jig before. This was perfect. Thank you 🙏🏻

Great Video and helped me along with my latest project! Thanks.

At the moment you have a 99.7% approval rate of this video. You've earned it. Thank you.

@10MinuteWorkshop

3 жыл бұрын

Thank you! 👍👍

Good tips! Always learn something useful from your videos! Thanks!⭐️

Thanks a lot! I just learnt how to use this tool!! Brilliant!

Another great tips video Peter. Thank you for sharing

@10MinuteWorkshop

3 жыл бұрын

Thanks Phil! 👍

Great video, some new ideas and techniques. Thank you.

Fantastic video, thank you!

Thank you so much I’m very new to woodworking and ordered one and had no idea how to use it and thanks to your video I have no problem! Thanks again your video was very helpful and easy to follow along with

Good vid. Straight forward and easy to follow. I got one of these jigs a couple years ago but could not figure out how to use it! Now I'm gonna be jigging my heart out! Lol

That was really well done, Peter! Every time I watch a video like this one I feel that I'm picking up ideas that will help me increase precision beyond the task at hand - like the brad point bit for alignment.

@10MinuteWorkshop

3 жыл бұрын

Thank you! 👍

Peter, thank you. The clamping tips addressed my concern with trying to handhold the jig and drill the hole at the same time.

Very informative, thanks!

Just bought a dowel jig and it didn’t come with instructions so, so glad to stumble over this vid. Very clear and helpful guidance. Thank You so much for your honest presentation :)

Great presentation and ideas

Useful video as always Peter, thank you!

@10MinuteWorkshop

3 жыл бұрын

Thanks Christian! 👌

Thanks Peter. Great video, well explained and demonstrated. I can now purchase a jig and know how to use it. Cheers.

Wonderfully explained and demonstrated Peter, I've had one of those dowel jigs for some years and never got to use it, now i feel confident to try it. Thanks.

Just the instructional video I needed. Thanks again for adding to your library of how to videos. Brilliant

@10MinuteWorkshop

3 жыл бұрын

Thank you! 👍

Thanks Peter. I’ve got a Wolfcraft jig but it’s languishing in the toolbox as I bought a Kreg pocket hole jig system. Probably because I hadn’t seen many KZread videos on how to use the dowel jig properly. Thanks for the pointers. I’ll have more of an idea now and can reference back if I do a few dowel joints. Many thanks. 👍🏻

I had my dowel jig on order, then found your film, brilliant thank you. When the jig arrives I now had a good idea how to use it, a fantastic film, much appreciated. I’m now also a new subscriber to your channel, perfect, kind regards.

Thanks it's was very clear and precise

I already have Wolfcraft jig for doweling. Simple and good video.

Thanks Peter, another wonderful basics video. I’m just about to L joint on a project. I’ve had a dowel jig for a good number of years but I thought I’d look up a ‘how to video’ just to make sure I wasn’t missing a trick. I naturally went to you video first and was not disappointed to find I’d missed a couple of tricks not just one. The notch on the side is new to me, also not using a Brad point drill bit was good to know about. Please keep up your superb content they make every day a school day. Ken Myerscough, Southport UK 👍

Very good hints. Thanks.

Yes, I really enjoyed your explanation. It'll make my life a lot easier when it comes to drilling for those pieces to match...

I watched your cabinet basics series and enjoyed and learnt so much from it. This dowel basics was just what I needed next, so thank you very much. Brilliant and off to order a dowel jig now.

@10MinuteWorkshop

3 жыл бұрын

Thank you! 👍

As always, sir, this was very clear and very informative. Thanks!

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍

Good tutorial sir... keep up the good work

Another no nonsense video, thanks Peter.

@10MinuteWorkshop

3 жыл бұрын

Thanks Jer! 👍👍

I have a Wolfcraft jig set and have had it for more than 10 years. Comes with dowels drills etc, AND it's identical to the 'cheap' jig that you used. I have used it maybe five or six times in the 10 years, as I didn;t find it easy to use. Today, watching your video I learn a lot. I think that you can rest assured that I will be using it a lot more in the future. Thank you Peter.

I learnt more of this video than i have the last 10 videos. I can actually make a straight dowl line up. Thank you for this video. I have had that tool for a long time and could never make it line up straight. A++++++++

Thank you so much for sharing! What a Champion

@10MinuteWorkshop

Жыл бұрын

Thank you! 👍

You have a clear gift for offering up clear and easy to understand directions. Thanks for this video.

@10MinuteWorkshop

3 жыл бұрын

Glad it was helpful, thanks for watching! 👍

Hi Peter, the more the merrier! Every time I watch your videos I learn something new. Keep up the good work thank you Steve

@10MinuteWorkshop

3 жыл бұрын

Thanks Steve! 👍

Thanks so much for this video, I think I now know how to use a dowel jig! The using the point of the drill bit to mark is especially useful.

Very useful tips Peter, thanks & great video as always.

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍

Great video. Just bought this exact jig and wanted advice on how to use it as I’m a newbie woodworker. Great advice and clever tips which I’ll be using when the time comes. Thanks👍

Loved the video Peter. Gave me a lot of pointers.

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍👍

perfect explainer, thanks heaps

Thanks so much for 14 mins of great instruction. You are right up the top of an extensive list of make and do subs I have and I think you are getting better despite your great back catalogue and long experience, that takes some doing, and you are doing it. All the best 👍

@10MinuteWorkshop

3 жыл бұрын

Thank you! 👍👍🙌

Excellent video Peter extremely helpful thanks for posting 👍

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍

Great explanation of all the features, including the end tip.

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍

yes i would like more videos like this teaching us....OORAH!!

My kit was delivered this week. Thank you for doing this video. Certainly has helped for when i start making my shelving unit

@10MinuteWorkshop

3 жыл бұрын

Fantastic - glad it was helpful! Let me know how you get on 👍

Another excellent "how to" video Peter. Thank you..

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍

Thanks Peter . I bought the Wolfcraft jig and was having no luck with its use, despite a KZread demo video. Now I can see why. Thanks.

Thanks Peter for all of your great videos, I struggled with this one even with clamps as I kept getting sideways movement out by a mm or so. I came across a video by Mardak workshop (how to use a doweling jig step by step). He does not mark the piece up at all instead using a dowel in a prior hole to line up the hole on the adjoining piece with the slots at the back of the jig. It worked a treat as locked everything into place so felt more stable.

Great video again Peter!! Like a back to basics video these are great!

@10MinuteWorkshop

3 жыл бұрын

Thanks Matt! 👍

Thank you so much sir.

That brad-point bit trick to align the jig to your mark is fantastic. Worth the view.

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍

Brilliant! Thank you!

@10MinuteWorkshop

3 жыл бұрын

Thanks! 👍