Don't Miss This Grease Zerk or Your Kubota BX Won't Start!!!
Are you greasing every grease fitting on your Kubota BX?
Жүктеу.....
Пікірлер: 78
@donmeyers29028 күн бұрын
Thank you for making this video. You saved the Day! It's hard to believe that a little grease and exercising the forward and reverse pedals would prevent my tractor from starting. After checking battery voltage and the fuses I turned to youtube. Thanks again!
@PeeksPeakHobbyHomestead
7 күн бұрын
Glad it helped!
@Ralph11763 ай бұрын
Great! I had that problem with the tractor not starting and thought it was the switch. Now, if it happens again I will move the peddle. Thank you, Ralph
@davidmcbride285 Жыл бұрын
I never knew that fitting was there. Thanks for the advice. You saved me a service call at my Kubota dealer
@fredA123411 ай бұрын
Thanks so much for the view. I just bought my tractor a few days ago so all this information is very helpful to a new BX owner
@mikekarvia17986 ай бұрын
Wow, just wow!!' Watched your video as I had the same problem even though I have greased the fitting. re-greased and problem solved. Well done, back in business
@OrangeismyNewGreen Жыл бұрын
I’ll be greasing that fitting tomorrow for sure 👍🏻😉🤣, thanks for sharing Lucas 👍🏻🙂🙋🏼♂️
@PeeksPeakHobbyHomestead
Жыл бұрын
Thanks, Luc!
@dmbhc Жыл бұрын
Thanks for the video and SUPER thanks for the tip on the tractor not starting due to the position of the treadle pedal needing grease!! I definitely have this issue and it has aggravated the hell out of me. Thanks again!!!
@PeeksPeakHobbyHomestead
Жыл бұрын
Glad I could help!
@Campzzyzx Жыл бұрын
Thank you. Really appreciate you taking the time and putting in the thought and effort to put these lessons together. Be well
@PeeksPeakHobbyHomestead
Жыл бұрын
You are welcome!
@D70340 Жыл бұрын
I`m probably a rare one here, because i go by the book on everything i own. Could be why i don`t have nearly the issues others have i guess. I even buy the shop manuals. Still an excellent video regardless Lucas.
@PeeksPeakHobbyHomestead
Жыл бұрын
Nothing wrong with that. No doubt it is why your equipment performs. 👍
@boblogan83445 ай бұрын
my dealer told me the BX has 1 grease fitting. and that was it. the tractor has no other grease fittings. Now the attachments and implements have a crap ton. nice video
@carloceleste89847 ай бұрын
My tractor stalled and this tip fixed it. Same senario as you described. Thanks for the great advice.
@PeeksPeakHobbyHomestead
7 ай бұрын
Good to hear! 👊
@Mavaholic9 ай бұрын
Just did my 400 hr maintenance a few days ago. Did not know about that fitting. If all else fails, read directions, or watch your videos. Thanks
@IL_Bowhunter3 ай бұрын
Thanks, this is one them zerts uou easily don't know about or forget about
@howardhulstein6530 Жыл бұрын
Great tip, well timed as I am about to do my 1st 10 hour grease on my loader. Love the channel and keep up the great work, i really appreciate it.
@PeeksPeakHobbyHomestead
Жыл бұрын
Thanks for leaving me a comment! Enjoy your BX!
@tylermarsh373210 ай бұрын
Just greased mine. Thanks for the tip !!
@Jack-go1nr Жыл бұрын
Have the bx1850 which is about 14 years old. They had problems with that not returning to center position for a while. I greased and adjusted many times before i was happy with it. Great videos.
@PeeksPeakHobbyHomestead
Жыл бұрын
Thanks for watching!
@ticklemeorange8328 Жыл бұрын
Good video, that can easily be missed. If I didn't do research I would have missed it as well.
@PeeksPeakHobbyHomestead
Жыл бұрын
Thank you!
@Glide199210 ай бұрын
I missed that grease fitting the manual. Will get it handled tomorrow. Thanks for the tip. Subbed and liked.
@PeeksPeakHobbyHomestead
10 ай бұрын
Thanks!
@CollinsCountry Жыл бұрын
Great tip! Stumbled across your channel and I am glad I did!
@PeeksPeakHobbyHomestead
Жыл бұрын
Thank you! I appreciate the comment!
@stuartkorte1642 Жыл бұрын
What a place for a grease fittings. Thanks.
@katherinefaulkner928110 ай бұрын
Thank you so much for this video.😊
@johnroberts15096 ай бұрын
Thanks for this video you have solved my problem.
@PeeksPeakHobbyHomestead
6 ай бұрын
Awesome!
@horacesawyer2487 Жыл бұрын
Good point! This one may need the special Lear Jet grease tube. It gets used every time the tractor fires up.
@PeeksPeakHobbyHomestead
Жыл бұрын
😂 That’s right!
@trumpzilla4193 Жыл бұрын
Have a 2650 and the same thing happened.....I never greased the one fitting for the pedal....thank-you. I watched videos where guys spent 2 days checking the fuses circuitry dilithium crystals and Flux capacitor and it was the pedal every time...lol
@PeeksPeakHobbyHomestead
Жыл бұрын
Lol
@jeffsteiger10 ай бұрын
Good to know, had no idea that one was there!
@eleazarguerra884 Жыл бұрын
You saved me..got it solved Fast..thanks
@faulltw Жыл бұрын
I knew about that fitting, but I am like you. i dont do every thing exactly.
@PineyGroveHomestead Жыл бұрын
Good tip, Lucas. Our L Series creeps but it doesn't have a grease fitting on the treadle. I've bent that HST damper before....they are $100!! Oh, and WalMart has literally been out of grease for months.
@PeeksPeakHobbyHomestead
Жыл бұрын
I bought a case at Rural King, because I was basically out when I shot this video.
@cove5310 ай бұрын
Great tip! 👍
@theoracle526510 күн бұрын
Thank you!
@hphillips7425 Жыл бұрын
Good information 👍🏻
@howardhulstein65309 ай бұрын
Thanks for taking the time to create these videos. I actually have been greasing this fitting as part of the schedule, but my neighbor had no idea. I refer him to your channel! Keep up the good work 👍
@PeeksPeakHobbyHomestead
9 ай бұрын
Awesome! Thanks for sharing!
@YEEETyonk Жыл бұрын
Thank you helped a ton
@PeeksPeakHobbyHomestead
Жыл бұрын
Awesome! That’s what we are here for. 👊
@joesephhitteman5912 ай бұрын
Thanks didn't even know it was there.
@Brookside975Ай бұрын
Good info. Really like your NA Miata. How long have you had it? I have had my 2001 NB since new and it still looks and drives as new. Cheers, Steve/OHIO
@TinkerTroll05 Жыл бұрын
I constantly forget to grease that point. I think I've greased it exactly once in the (almost) 150 hours I've got on my BX. I always grease everything else then go about my business only to realize a few minutes later that I forgot to get that one. "No problem, I'll catch it next time. One missed greasing isn't going to hurt anything..." Then, yeah -- I forget it the next time and the whole cycle starts again lol
@PeeksPeakHobbyHomestead
Жыл бұрын
Sounds just like me!
@Galvino10008 ай бұрын
Didn’t know about this sensor will check it
@user-cu9qv1sk5x7 ай бұрын
Well I'll be darned I found mine on an older tractor and the zerk fitting was covered up with bed liner, and I've been having issues where I let off and the tractor wants to keep going so now I know how to fix it
@wileygainesiii977 Жыл бұрын
wiley,thanks.
@garyruprecht72156 ай бұрын
Thanks never know that greese fitting was there
@ke6bnl Жыл бұрын
I will need to check the situation on my treddle pedal for my older b7800 I think it has given me a couple of no starts in the last year.
@PeeksPeakHobbyHomestead
Жыл бұрын
I don’t know if they are the same, but I’m sure similar…. Good luck!
@gregorymacneil2836 Жыл бұрын
That little cooling fan used to be very very expensive to replace - if you use it in rough conditions you might want to get a aftermarket guard.
@PeeksPeakHobbyHomestead
Жыл бұрын
😂🤣. You’re not wrong. I replaced my fan for $18 but it was a decent job. I have a video on it. It doable in under 2hours.
@scotmiller5979
11 ай бұрын
Mine came with a broken HST fan. They cost less than 15$. Took about 3 hours and I drilled the hole rather than taking everything apart. Used it 1 hour and a stick broke it…again. Second time took me an hour plus I installed the skid plate. Wise to do so. The dealer charges around 400 I was told.
@tcb069 Жыл бұрын
help my bx2380 seat switch is bad used jumper wire on switch by front of seat didnt work , i have to bounce hard on seat to get it to work , if my weight shifts on seat it stalls, by passed connection to seat switch and same , stalls , is there a fuse i can remove to fix it ?
@PeeksPeakHobbyHomestead
Жыл бұрын
I’m sorry, I don’t know the fix for that off hand…
@Sventy11 Жыл бұрын
Pretty sure this is the only zerk fitting on the tractor, obviously not including the FEL or BH. Have you ever done the recommended adjustment for the home position of the pedal?
@PeeksPeakHobbyHomestead
Жыл бұрын
Actually I haven’t. Probably would hurt to check that. 👍
@donlandsborough898 Жыл бұрын
That did happen to me .. spray greaese
@BigDsHomestead Жыл бұрын
Shame, shame. Looks like someone hasn't been watching Paul Shorts old maintenance video he put out a few years ago. Lol Also, don't forget to turn the knobs for both mower lift and the one that controls speed of rear pto lift arms. Paulsaid they'll freeze up as well. As a matter of fact, I am going to do my now.
@PeeksPeakHobbyHomestead
Жыл бұрын
😂
@beeeeeeeeeeep10 ай бұрын
Hurry people go to 3:25
@smeefamily54 Жыл бұрын
Lucas: well I never knew that. I only have 119 hours on Mr K, so will keep an eye on it. Take care and stay safe.
@PeeksPeakHobbyHomestead
Жыл бұрын
Have a great week!
@mattpardue12505 ай бұрын
I hate reading directions
@mikec812311 ай бұрын
If you have a BX and you don't know what and how to grease it you need to sell it it now. It is not a lawn mower that you put gas in as needed. It is a machine to be respected and maintained.
@vc8160
8 ай бұрын
Relax and take a deep breath my friend!
@mikec8123
8 ай бұрын
@@vc8160 I must have had a bad day. I don't even remember it.
Пікірлер: 78
Thank you for making this video. You saved the Day! It's hard to believe that a little grease and exercising the forward and reverse pedals would prevent my tractor from starting. After checking battery voltage and the fuses I turned to youtube. Thanks again!
@PeeksPeakHobbyHomestead
7 күн бұрын
Glad it helped!
Great! I had that problem with the tractor not starting and thought it was the switch. Now, if it happens again I will move the peddle. Thank you, Ralph
I never knew that fitting was there. Thanks for the advice. You saved me a service call at my Kubota dealer
Thanks so much for the view. I just bought my tractor a few days ago so all this information is very helpful to a new BX owner
Wow, just wow!!' Watched your video as I had the same problem even though I have greased the fitting. re-greased and problem solved. Well done, back in business
I’ll be greasing that fitting tomorrow for sure 👍🏻😉🤣, thanks for sharing Lucas 👍🏻🙂🙋🏼♂️
@PeeksPeakHobbyHomestead
Жыл бұрын
Thanks, Luc!
Thanks for the video and SUPER thanks for the tip on the tractor not starting due to the position of the treadle pedal needing grease!! I definitely have this issue and it has aggravated the hell out of me. Thanks again!!!
@PeeksPeakHobbyHomestead
Жыл бұрын
Glad I could help!
Thank you. Really appreciate you taking the time and putting in the thought and effort to put these lessons together. Be well
@PeeksPeakHobbyHomestead
Жыл бұрын
You are welcome!
I`m probably a rare one here, because i go by the book on everything i own. Could be why i don`t have nearly the issues others have i guess. I even buy the shop manuals. Still an excellent video regardless Lucas.
@PeeksPeakHobbyHomestead
Жыл бұрын
Nothing wrong with that. No doubt it is why your equipment performs. 👍
my dealer told me the BX has 1 grease fitting. and that was it. the tractor has no other grease fittings. Now the attachments and implements have a crap ton. nice video
My tractor stalled and this tip fixed it. Same senario as you described. Thanks for the great advice.
@PeeksPeakHobbyHomestead
7 ай бұрын
Good to hear! 👊
Just did my 400 hr maintenance a few days ago. Did not know about that fitting. If all else fails, read directions, or watch your videos. Thanks
Thanks, this is one them zerts uou easily don't know about or forget about
Great tip, well timed as I am about to do my 1st 10 hour grease on my loader. Love the channel and keep up the great work, i really appreciate it.
@PeeksPeakHobbyHomestead
Жыл бұрын
Thanks for leaving me a comment! Enjoy your BX!
Just greased mine. Thanks for the tip !!
Have the bx1850 which is about 14 years old. They had problems with that not returning to center position for a while. I greased and adjusted many times before i was happy with it. Great videos.
@PeeksPeakHobbyHomestead
Жыл бұрын
Thanks for watching!
Good video, that can easily be missed. If I didn't do research I would have missed it as well.
@PeeksPeakHobbyHomestead
Жыл бұрын
Thank you!
I missed that grease fitting the manual. Will get it handled tomorrow. Thanks for the tip. Subbed and liked.
@PeeksPeakHobbyHomestead
10 ай бұрын
Thanks!
Great tip! Stumbled across your channel and I am glad I did!
@PeeksPeakHobbyHomestead
Жыл бұрын
Thank you! I appreciate the comment!
What a place for a grease fittings. Thanks.
Thank you so much for this video.😊
Thanks for this video you have solved my problem.
@PeeksPeakHobbyHomestead
6 ай бұрын
Awesome!
Good point! This one may need the special Lear Jet grease tube. It gets used every time the tractor fires up.
@PeeksPeakHobbyHomestead
Жыл бұрын
😂 That’s right!
Have a 2650 and the same thing happened.....I never greased the one fitting for the pedal....thank-you. I watched videos where guys spent 2 days checking the fuses circuitry dilithium crystals and Flux capacitor and it was the pedal every time...lol
@PeeksPeakHobbyHomestead
Жыл бұрын
Lol
Good to know, had no idea that one was there!
You saved me..got it solved Fast..thanks
I knew about that fitting, but I am like you. i dont do every thing exactly.
Good tip, Lucas. Our L Series creeps but it doesn't have a grease fitting on the treadle. I've bent that HST damper before....they are $100!! Oh, and WalMart has literally been out of grease for months.
@PeeksPeakHobbyHomestead
Жыл бұрын
I bought a case at Rural King, because I was basically out when I shot this video.
Great tip! 👍
Thank you!
Good information 👍🏻
Thanks for taking the time to create these videos. I actually have been greasing this fitting as part of the schedule, but my neighbor had no idea. I refer him to your channel! Keep up the good work 👍
@PeeksPeakHobbyHomestead
9 ай бұрын
Awesome! Thanks for sharing!
Thank you helped a ton
@PeeksPeakHobbyHomestead
Жыл бұрын
Awesome! That’s what we are here for. 👊
Thanks didn't even know it was there.
Good info. Really like your NA Miata. How long have you had it? I have had my 2001 NB since new and it still looks and drives as new. Cheers, Steve/OHIO
I constantly forget to grease that point. I think I've greased it exactly once in the (almost) 150 hours I've got on my BX. I always grease everything else then go about my business only to realize a few minutes later that I forgot to get that one. "No problem, I'll catch it next time. One missed greasing isn't going to hurt anything..." Then, yeah -- I forget it the next time and the whole cycle starts again lol
@PeeksPeakHobbyHomestead
Жыл бұрын
Sounds just like me!
Didn’t know about this sensor will check it
Well I'll be darned I found mine on an older tractor and the zerk fitting was covered up with bed liner, and I've been having issues where I let off and the tractor wants to keep going so now I know how to fix it
wiley,thanks.
Thanks never know that greese fitting was there
I will need to check the situation on my treddle pedal for my older b7800 I think it has given me a couple of no starts in the last year.
@PeeksPeakHobbyHomestead
Жыл бұрын
I don’t know if they are the same, but I’m sure similar…. Good luck!
That little cooling fan used to be very very expensive to replace - if you use it in rough conditions you might want to get a aftermarket guard.
@PeeksPeakHobbyHomestead
Жыл бұрын
😂🤣. You’re not wrong. I replaced my fan for $18 but it was a decent job. I have a video on it. It doable in under 2hours.
@scotmiller5979
11 ай бұрын
Mine came with a broken HST fan. They cost less than 15$. Took about 3 hours and I drilled the hole rather than taking everything apart. Used it 1 hour and a stick broke it…again. Second time took me an hour plus I installed the skid plate. Wise to do so. The dealer charges around 400 I was told.
help my bx2380 seat switch is bad used jumper wire on switch by front of seat didnt work , i have to bounce hard on seat to get it to work , if my weight shifts on seat it stalls, by passed connection to seat switch and same , stalls , is there a fuse i can remove to fix it ?
@PeeksPeakHobbyHomestead
Жыл бұрын
I’m sorry, I don’t know the fix for that off hand…
Pretty sure this is the only zerk fitting on the tractor, obviously not including the FEL or BH. Have you ever done the recommended adjustment for the home position of the pedal?
@PeeksPeakHobbyHomestead
Жыл бұрын
Actually I haven’t. Probably would hurt to check that. 👍
That did happen to me .. spray greaese
Shame, shame. Looks like someone hasn't been watching Paul Shorts old maintenance video he put out a few years ago. Lol Also, don't forget to turn the knobs for both mower lift and the one that controls speed of rear pto lift arms. Paulsaid they'll freeze up as well. As a matter of fact, I am going to do my now.
@PeeksPeakHobbyHomestead
Жыл бұрын
😂
Hurry people go to 3:25
Lucas: well I never knew that. I only have 119 hours on Mr K, so will keep an eye on it. Take care and stay safe.
@PeeksPeakHobbyHomestead
Жыл бұрын
Have a great week!
I hate reading directions
If you have a BX and you don't know what and how to grease it you need to sell it it now. It is not a lawn mower that you put gas in as needed. It is a machine to be respected and maintained.
@vc8160
8 ай бұрын
Relax and take a deep breath my friend!
@mikec8123
8 ай бұрын
@@vc8160 I must have had a bad day. I don't even remember it.