Want more tips on how to mod your devices to USB-C? 👉🍿Watch Next kzread.info/dash/bejne/iKp_zMFweqveqtI.html Mod your PS4 Controller to USB-C | Here is how!

19:32 hahaha you got me

@CanWeFixThat

2 ай бұрын

😉

Great vid :)

@CanWeFixThat

2 ай бұрын

Thank you! 🤓😋

Another great video 🤩 thank you for keeping it up 💪 (blower gave me a jumpscare lmao)

@CanWeFixThat

2 ай бұрын

Thank you so much, mate! Sorry for making you jump 😄✌️

USB-C is my love language

@CanWeFixThat

2 ай бұрын

You are my man! 🙌

11:35 LOL reminds me of raspberry pi 4 engineers. You need 2x 5.1k resistors on both CC1 AND CC2 separately, You can't short them together and use 1 resistor. BTW, I see aliexpress has boards with 2 pads, seems like your board is an old revision. Some have resistors already soldered.

@CanWeFixThat

2 ай бұрын

Hi Jackie! Yes, I know this setup isn't ideal, but I haven't found any issues with it so far. Do you have a link to the upgraded boards you mentioned? I would update the product links to make things even easier! 😉

I'm looking to get a similar microscope setup, however your link for the 180x lens points to a page with two items that are listed as "180X 50mm", but look very different. One is 45USD, the other is 102USD. Which is it? Also, do you have links for the light ring and articulating arm mount you are using? Thanks!

@CanWeFixThat

Ай бұрын

Hi Andrew! I looked it up, it's the 180x, third from the left in the selection. I updated the video description with the info about the light ring. The articulating arm I'm using is a DIY solution from an old computer screen table mount-not recommendable. ^^

Came across your channel recently and have came back to your videos for learnjng different things. I have a question. Do you know of a 6 pin type c breakout board with 2 spots for the 5.1 surface mount resistors? Trying to put one in my 3ds and make it able to do c to c charging as well as a to c charging. I have found some that others have built specifically for the 3 ds but they get rather expensive if doing more than one

@CanWeFixThat

Ай бұрын

Hi Knuckles! Thanks for your support, it means a lot to me. 😍 Do you have a link to these breakout boards? But why wouldn’t it work? ;-)

@knuckles31312

Ай бұрын

@@CanWeFixThat I will look for the link of the ones I had found a month or two ago, I just got a pcb etching kit and am going to try to make the board myself so it doesn't get too pricey that way, but I just wanted to see if you knew of one I could purchase like from Amazon or something that just would have made it easier because the 5.1 surface mount resistors are so small my hands start to shake when trying to mess with them lmao

Is this the same way for the 3ds

@CanWeFixThat

Ай бұрын

Yep! This method works with every USB-Device!

@goethecsgo9935

Ай бұрын

​@@CanWeFixThat but a new 3ds is not. A USB device

@CanWeFixThat

Ай бұрын

@goethecsgo9935 You are absolutely right! But in this case, it works because it also uses 5V for charging. So you are fine just using the GND and VCC connections.

only $1? seems interesting.

@CanWeFixThat

2 ай бұрын

Hi Pablo! Yes, the boards are dirt cheap! 🤑

So this time a little later than usual :D great video :) PS: Sie haben Post ;)

@CanWeFixThat

2 ай бұрын

Hi Sebastian! Thanks! By the way, I've started using the other flux in the meantime! 😉 I haven't received any mail from you yet, though. 🫣

@SebastianL.83

2 ай бұрын

@@CanWeFixThat i send it to markus@canwefixthat.com maybe in the spam fodler?