Don't make these mistakes with your NVMe SSD installation - NVMe tips and tricks
Ойындар
In this video, we're going to be talking about some of the most common mistakes that people make when installing a NVMe SSD, and how to avoid them. We're also going to be going over some of the best ways to measure the performance of a NVMe SSD, and dispel some of the myths about NVMe PCIe speeds.
If you're looking to install a NVMe SSD in your computer, then this video is for you! We'll cover everything from the basics of NVMe SSDs to the best way to install them. We'll also discuss some of the key factors to consider when choosing a NVMe SSD, and how to measure their performance.
The process for installing is really easy but may vary depending on your motherboard - some have heatsinks and different screw setups. It's also worth checking your manual as you may find that not all the drives work the same way.
NVMe installation is easy in theory but it's important to keep these things in mind:
- Use the top spot where possible to ensure x4 PCIe lanes
- Remove any plastic stickers from heatsinks and shields
- Use thermal pads to disperse heat
- If you install multiple drives this may reduce PCIe lanes available for your GPU
- You may need to change settings in your BIOS
- When installing in Windows use the Disk Management/Create a partition settings to set the drive up
- Always benchmark to make sure it's running as it should be.
Other videos to watch:
Is your M.2 NVMe port slower than you realise? Not all M.2 ports give equal speeds • Is your M.2 NVMe port ...
How to clone/copy Windows to a new drive and why you should • How to clone/copy Wind...
How to install Kingston Fury Renegade • How to install Kingsto...
Essential things to do when you first build your PC • Essential things to do...
I made some mistakes with this Lian Li Evo build • I made some mistakes w...
Do not make this stupid mistake • Do not make this stupi...
How to get more FPS with your Nvidia RTX GPU • How to get more FPS wi...
Unlike most NVMe SSDs, this one does NOT come with M2 screws in the box! If you lose it or find you don't have one then there's good news as you can buy them from Amazon*:
Amazon UK - amzn.to/3j9Jw5p
Amazon US - amzn.to/2Qk5tT3
Amazon CA - amzn.to/3lfsHb8
Amazon DE - amzn.to/3j8wAgb
Amazon FR - amzn.to/3b1J1HS
Amazon IT - amzn.to/2FVTQ2D
Crystal Diskmark download - crystalmark.info/en/download/
Samsung Magician Download - semiconductor.samsung.com/con...
Buy the drive:
Newegg - newegg.io/nc6dd162c3
Amazon UK - amzn.to/3G0VD37
Amazon US - amzn.to/3Yx8K32
Amazon FR - amzn.to/3YsMLdF
Amazon IT - amzn.to/3j5Rxh0
Amazon DE - amzn.to/3W5N0tE
Amazon CA - amzn.to/3hxhmWR
🏆Big thanks to my super awesome KZread members:
SirSpawnsALot, Meatykeyboard, Beaster Bunny, JayShank007, Rawrr483, DStarastins, McFarty, Riggsy79, Chief Hao, Aaron Yarden, Geralt of Rivia, Derrick Townsend and you? 🏆
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - teespring.com/stores/the-prov...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with www.amazon.com/ideas/amzn1.ac...
Shure SM7B and GoXLR - • Shure SM7B and GoXLR M...
PLEASE NOTE
Affiliate links*:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions.
Пікірлер: 597
Other videos to watch: Is your M.2 NVMe port slower than you realise? Not all M.2 ports give equal speeds kzread.info/dash/bejne/g3h1zLFmgtfIpbQ.html How to clone/copy Windows to a new drive and why you should kzread.info/dash/bejne/jKyurqmFo5afpKQ.html How to install Kingston Fury Renegade kzread.info/dash/bejne/jIyKy7Fue7KvnJM.html Essential things to do when you first build your PC kzread.info/dash/bejne/oJ-es8yoqtDgnLw.html I made some mistakes with this Lian Li Evo build kzread.info/dash/bejne/ZqqXlLJmntG_Zag.html Do not make this stupid mistake kzread.info/dash/bejne/emqo08qIaKTanto.html How to get more FPS with your Nvidia RTX GPU kzread.info/dash/bejne/YpmCuLuropnAdMo.html
@sashomedia
17 күн бұрын
At Disk Formatting section of the video, it is good to be mentioned of 10-20% of the total amount of the disk space, to be left as unlocated for long reliability and data integrity of the SSD disks
You should check the MB manual for the bifurcation table which will detail PCIE lane sharing details.
Love this! I just recently added my SSD to the wrong slot after checking in Samsung magician. I'm still new to the custom PC space, so videos like this help me out a ton! Thanks for the tips/guide!
@TheProvokedPrawn
Жыл бұрын
Glad I could help!
Thanks you for these great tips. I don't have any Gen 4 stuff yet, but I'll make sure my 3 NVMe's are working properly thanks to your video!
It's not always the top slot. Some boards steal PCIe 5 lanes from the GPU in the top slot (M.2_1), reducing your GPU from x16 to x8. This would be less of an issue with a PCIe 5 GPU, but the current generation of GPUs are PCIe 4, and will lose performance. The correct slot for a gen 4 drive can be M.2_2, if the board routes the CPU's x4 lanes there.
@Wedgeman_Riley
Жыл бұрын
thats why you dont buy intel, ryzen doesnt have this problem because it has 28 gen 5 lanes on the 7000 series
@crisnmaryfam7344
Жыл бұрын
Its a good general rule of thumb, but if you are assembling your own PC motherboard up, then you can take the time to read some labels or the owners manual to see what is the proper slot for gen 4 support. Some boards even have the "dimm .2" slots next to the ram that allow 2 nvme similar to his pcie dual nvme card.
@Sl0th150
Жыл бұрын
@@Wedgeman_Riley really random and kind of irrelevant to the current topic but thoughts on the x670e-a strix mobo? Trying to find a white one that would go with a 7950x especially after seeing your comment about the 28 gen 5 lanes.
@Arcangel2992
Жыл бұрын
@@Wedgeman_Riley that’s convenient, I have an x570 board with a 5800x and I was worried about adding another NVME
@Wedgeman_Riley
Жыл бұрын
@@Sl0th150 the x670e gaming is a good motherboard if your willing to spend alot and will work well with the 7950x because it has good power delivery and enough gen 5 lanes to support a gpu and 2 nvme ssds at gen 5 which is the most the board supports and still has enough gen 5 lanes for any expansion cards like an elgato capture card
Thank you. I just installed a 2nd 4TB ssd on the motherboard, and it didn't show, but after watching your video above regarding "disk management " it came alive 😊
@TheProvokedPrawn
Ай бұрын
Glad it helped
Happy to see NVMe slot between CPU and peg slot. I was the engineer inside Intel added a nvme to desktop in Skylake time keeping atx form factor.
Big support for the channel and keep on making awesome content and guides and giveaways in the future as well. Worked for me
Followed your instructions on my 10 year old pc after purchasing a ssd. Thank you so much for the information as my computer is like new now and it was so easy to do using your instructions 😀 😊
@TheProvokedPrawn
Жыл бұрын
👍
This seems to be a very underrated channel, the content is excellent. One question I had and was confusing from the manual, is there a difference or something to be aware of when installing NVME double sided vs single. It mentions rubber grommets and seems slot dependent looking at a ASUS z790 manual. - Cheers
@83n80y
Жыл бұрын
If it's double-sided then you'll need cooling on both sides. The rubber pads they often provide would buffer the metal on the bottom side from scratching the motherboard and preventing shorts. You won't see a double-sided NVMe unless you're using a very high capacity drive. All the 2TB and less I've seen are single-sided. You can tell by where the memory chips are. The back side will only have a sticker.
Thank you for this video this is the First time installing a SSD like this, Really helped
You can just right-click the Windows start button and go right to disk management directly in Windows 11. If I remember right, the same shortcut works in 10 as well.
As always a soothing and helpful guide for this nutty new technology. As some have mentioned, you should definitely be looking at your motherboard manual. I think people try to wing it too much and with m.2 you cannot do that. Many people don't know you will often lose the use of a few sata ports when using m.2 on certain slots as well. I check m.2 configuration before I even buy a motherboard so I know it will work for my need.
@TheProvokedPrawn
Жыл бұрын
True
@drunkhusband6257
Жыл бұрын
New? The tech is like 10 years old now
@Lockjaw7192
9 ай бұрын
@@drunkhusband6257 some people are upgrading to a motherboard with NVME support for the first time. i got some used PC parts about 2 months ago and it was the first motherboard i owned with NVME support. i had no idea NVME slots would disable SATA ports on the motherboard. I had my optical drive plugged into sata port 6 and then installed my secondary NVMe SSD. then i wondered if my Bluray drive broke. nope. the NVMe being plugged in disabled SATA ports 5 and 6.
@JohnDoeWasntTaken
6 ай бұрын
@@drunkhusband6257 Yup, my Z97 motherboard has an M.2 slot, definitely not as new as one would think.
@jirehla-ab1671
Ай бұрын
Is it possible to boot into u.2 ssd if its inserted to an u.2 to m.2 adapter?@@TheProvokedPrawn
I will say, that you should check your motherboard's manual before installing. My Asus ROG Strix B650 mobo doesn't state that one slot is better than another. My old Asrock X370 Tai Chi directed me to put the sata drive in the top slot and the NVMe drive in the second slot for full speeds.
@MrCan3112
Жыл бұрын
How did you install your m.2? Die you use the rubber pad to prevent the m.2 from bending?
Very informative video! You've helped me ensure my new Crucial P3 NVMe was running optimally. Keep up the good work, Prawn!
@TheProvokedPrawn
Ай бұрын
Great to hear!
Thanks! This was perfect info for me to install my new NVME SSD.
Thank you so much for this! You explained clearly and deffo saved me from a lot of pain, installing my new 990 2Tb. Love your style so: liked, Subbed, shared and commented! May I ask, nay beg, that you make a vid explaining the subtleties of provisioning, over or under!? I truly love the way you explain things and I'm sure that with your guidance, the penny will finally drop! Thank you once again, you are a legend, Sir!
Thank you for helping me with my very first NVME selection and installation.
@TheProvokedPrawn
Жыл бұрын
Glad to help!
Thanks installed extra ssd and I didn’t see it on pc, followed your easy steps and I am good to go. Thanks.
@TheProvokedPrawn
Жыл бұрын
You're welcome!
Very Informative Video i also have the Z690 Formula and regularly use armoury crate, i can now check my WD Black SN850 drives are performing as they should be. Thank You!
Just read the manual it will tell you which pci slot combo would work to get the maximum speed. It is actually better to read about it before buying the mobo ☺️.
@rudysal1429
Жыл бұрын
Yup, and if you need to change the pciex16 to x8 so you can use the other slot. Had to figure this out on my server the other day. Also chipsets will usually tell you which have more m.2 slots and support full speeds.
thanks. will be sure to check that speed. About to add a 2tb ssd and will check the speed for sure now.
This video is really good. Well done mate !
Thanks. Should com in handy as I am now building a new PC to replace the one I built 15 years ago. Data storage technology has changed a lot since then. Never heard of NVMe or M.2 until I began researching parts for the new system.
thanx for the help i added an extra drive and was wonder what the heck went wrong but with your video i was able to easily figure out the system forgot to name the drive easily fixed it
@TheProvokedPrawn
5 ай бұрын
👍🏼👍🏼👍🏼
Most informative and well prepared video about the subject yet, thank you very much
@TheProvokedPrawn
Жыл бұрын
Thank you.
The P.Prawn just gave a whole bunch of crucial info on PCI NVMe that every mid-level user has to know. what makes it better is that it was delivered effectively under 10 minutes. Bravoooo
This was highly informative - thank you so much.
@TheProvokedPrawn
Жыл бұрын
You are so welcome!
I don't think you mentioned it, one thing I'd add is that for whatever reason, the retention screws for M.2 drives are exceptionally easy to strip. After stripping two of them, I went and bought an IFixIt kit. You don't really need to go that far, but you probably want to make sure you're using a Phillips #1 bit. Often it doesn't matter w/ Phillips heads, but in this case it does.
@elm4nsuri
Жыл бұрын
nah. only you had to be careful of this.....
@iamamish
Жыл бұрын
@@elm4nsuri Certainly possible! But I've never had this issue with any other screw type, and yet I've had the problem each time I've had to install an M.2 drive.
@taylormeyer671
11 ай бұрын
There's really no reason to overtighten any screws on a PC. Working on a car it could happen but stripping a screw on a PC is completely out of the question.
@iamamish
11 ай бұрын
@@taylormeyer671 for me the issue wasn't overtightening - the issue was that the bit didn't fit very well. The M2 screws really want a P1 bit. Normally with other screws you can use other phillips bits, but not for the M2
@uncrunch398
9 ай бұрын
It's always a best practice to use a bit that fits the screw snug. Philips was intended to prevent overtightening though. If you have precise control of your driver, torx would be better if it's an option. Over tightening is bad, slamming the tip of a driver into a circuit board is much worse.
some new info for me thank you. I didn't know how much more armory could do
@TheProvokedPrawn
Жыл бұрын
No problem!
Very useful. Thanks. I was curious what speed my SSDs were since I have a 5700g CPU. Evidently, doesn't matter. I found my Gen 3 SSD at Gen 3 speed and my Gen 4 SSD at Gen 4. I have a 4TB Gen 4 coming tomorrow to replace my Gen 3 drive and I'm happy to see I didn't waste $50. lol... No need to replace the 5700g just yet.
I never thought to check the m.2 speed/lanes. I have 1 firecuda 530 2tb and 2 Samsung 980pro 1tb. I remember using the magician software on my ddr4 board and when I used their benchmark it never reached the rated speed. This is probably the reason. God there's so much to learn.
Good to know. Thanks a ton. The next gen AMDs are starting with 88 PCIe lanes.
Really appreciate your vids you explain things so easily for us noobs this is key SO from me THANKS & I’m sure everyone, so helpful & Respect keep up the great work 100%👍🏼🥇✅
@TheProvokedPrawn
Жыл бұрын
Glad to hear it!
Hey man, this helped me get full 4.0 speeds from my mobo, it was m.2 2_2 had to swap them around just got a new gen 4, thanks.
@TheProvokedPrawn
7 ай бұрын
Glad I could help
Great video thoroughly enjoyed it very well detailed and understood everything you said thank you
@TheProvokedPrawn
9 ай бұрын
Glad you enjoyed it! Hope you enjoyed enough to subscribe 🦐
Wouldn't putting thermal pads under the m.2 drive increase the temperature transfer to the area under the m.2? Just a little confused for my build
another great video prawn! well done, thanks
@TheProvokedPrawn
2 ай бұрын
Thanks again!
Thanks for the video. excellent job. Very informative and well presented.
@TheProvokedPrawn
Жыл бұрын
Glad it was helpful!
You woke me up to some of the limitations.
Hey! Thanks for your video. I am building a PC and I bought two same exact M2 SSD. When installing windows, how do I make sure I select the fastest one? Not sure what to do. If I install one first it will be a pain in the butt to remove the GPU to install the second one
FYI always read the M/B guidance some M/B will reduce the speed on the GPU lane, and some will say slot 1 and slot 2 cannot be populated simultaneously
Thank you for the video I felt like I was listening to a radio DJ very clear and nice voice
@TheProvokedPrawn
Жыл бұрын
Face for radio, voice for KZread. :)
Would be intrested in knowing which Case you showed in this video? It looked so nice and clean!
@TheProvokedPrawn
Жыл бұрын
kzread.info/dash/bejne/ZqqXlLJmntG_Zag.html
STEP 1 - do research about speeds etc STEP 2 - buy your hardware STEP 3 - turn the screw to mount the M.2 SSD and have the standoff come out of the motherboard
@TheProvokedPrawn
Жыл бұрын
Most people won't do step one.
thx. had no idea I needed to mount it.
Hi, does Gen3 and Gen4 refer to the max supported version of the PCIe bus, or does it have correlation to the X4/X1 lane notation of the PCIe slots? If my motherboard only supports PCIe 3 - would it matter if I connected the drive to the X1, X4 or even an X16 slot?
Once I screwed in an NVMe SSD without the supporting screw hole under the SSD and it bent so much that I thought I snapped it. Nope, it still works to this day.
@tankerock
Жыл бұрын
pcbs can bend quite a bit before snapping
I'm a noob and this was super helpful lol. I was sweating buckets while adding the ssd to my pc lol. I felt like I was performing brain surgery😂😂 Thanks for great instructions! :)
If you have bought a drive with a heatsink is it still necessary to lay it upon extra thermal padding? Installing into my new Aurora R15(2 TB 980 pro w/heatsink) and PS5(1 TB pro w/ heatsink) each. Basically is it not necessary to have thermal padding if you bought an ssd with a heatsink?
Coolest PC building channel(sorry if that's limiting or making modest)if I ever saw one.
@TheProvokedPrawn
9 ай бұрын
Thank you 👍
I bought a couple of Adata XPG Gammix NVMEs for my build. They came with a separate, very thin aluminum heatsink cover. Should I put those on and then install the motherboard heatsinks on top of those? Or should I install them without their respective factory heatsink? (just using the mobo hs covers)
I dont have a thermal sink for mine, is that ok? It's installed in the top slot. I spent a long time thinking of what slot should I use, because while the second one is apparently slower (only 2 slots in my mobo btw), it comes with a heatsink. On the other hand, it goes right below the graphics card, little room to breath under that hot thing.
I know you might not see my comment amongst all the other comments, but you sir, are a fantastic KZreadr and creator. This was seriously a high quality and educating video. I appreciate your effort and time you spend to make this video!
@TheProvokedPrawn
9 ай бұрын
Thanks. That's very nice of you
i love nvme info videos, great video
@TheProvokedPrawn
Жыл бұрын
Glad you enjoyed!
Thanks for a very useful video
@TheProvokedPrawn
22 күн бұрын
Thank you for watching! This one might be good too kzread.info/dash/bejne/mo2N28mfZZqbfpM.html
Im planning to add another ssd, i have a 970 pro and i want to add 990 pro as another one. Can i keep the 990 in any slot or it has to be the top slot for max performance? Also i have to copy all system and games on to the 990 from the 970 right?
Excellent information >> perfect for what I needed to know thank you 👌💯👀🎥😎🌟
@TheProvokedPrawn
8 ай бұрын
Glad it was helpful!
I'm setting up a new gaming rig with 3 1Tb KC3000 drives on a Z790 Tomahawk MB...this is all very helpful. Any comments on the Kingston SSD Manager software in comparison to the Samsung Magic software?
Thanks for this well done and Informative video
@TheProvokedPrawn
Жыл бұрын
Thanks John. Glad you found it useful. Hope you enjoyed enough to subscribe 🦐
All well and good have ing sticky thermal tape inside the lid/top plate on these modern MBs but how do you remove them to change your SSD if the it is secured to the MB by a fastener and the thermal tape is doing its thing and is securely stuck? Just a thought
Incredibly useful video, as are all your videos!
@TheProvokedPrawn
10 ай бұрын
Very kind
You're missing a related option. If you are going after maximum nvme m.2 storage for minimum cash, you can use an interface converting device. Use 4 pcie x4 gen 2 drives over 1 pcie x4 gen 4 interface. This works by converting the slower older hen pcie protocol to the faster new gen protocol. Gen 4 throughput is double gen 3, which is double gen 2. At the end you are moving the same Gb/s through half or a quarter the same lanes because of the converter. You pick up a very small amount of latency but multiply the pcie lanes on desktop level systems reducing total cost.
@Mangomaniac
Жыл бұрын
do you know if a ryzen 5800x3d pairs well with the msi x570s edge max wifi & a 250gb samsung 970 evolution plus with a 2tb 970 evo plus?
@MrBfg586
Жыл бұрын
In my bios it's has the PCI set to auto. If I know it's 4th Gen ssd should I change it in the dropdown or should I leave it at auto?
Thanks for the lesson. Subbed
@TheProvokedPrawn
Жыл бұрын
Welcome!
Very useful @The Provoked Prawn. My drives are x2 Samsung 990's and x 3 Crucial Gen 4 drives all running at Gen 2x1. I have an Asus Z790 Hero Motherboard, how do I get them running at the Full speed please?
I cannot get the M2 screw in. Or to be precise, the thicker screw that the other one goes into, the one that goes below the actual drive. Are you supposed to be able to just manually twist that in?
Is it possible to have a B & M keyed (2 notches) PCIe NVMe M.2 SSD in a 2280 form factor? I've only seen the one notch version as seen in your video.
Hello! Can you tell me please which slot should I insert the SECOND SSD m2 drive (Samsung 990 Pro) in the Asus z790 Dark Hero motherboard?? The first drive is already inserted into the main slot near the processor. I will be very grateful for your answer!
Sir Thank you for the samsung ssd software tip- subscribed
@TheProvokedPrawn
Жыл бұрын
Welcome 👍
Is the thermal pack normally "glued" to the ssd after the installation after you peal of the plastic? (I want to install two Additional SSD to my already installed SSD on the top spot) I bought two faster one's, thats way I want to change the one on the top spot with one faster one i bought (for running the OS usw.) so if its glued i'm not gonna do it obiously.
Excellent, thank you!
@TheProvokedPrawn
Жыл бұрын
Glad it was helpful!
Thanks for this video. Could u answer a question for me please. I am currently building a new pc (after very long time) again. I never used m.2 (werent a thing, when i last have build one). I plan to use 2 m.2´s. A smaller one as systemdrive and a 2 TB one as gaming drive (both Samsung 980 Pro). The motherboard i want to buy is the ASUS ROG STRIX B650E-E (hopefully the i225-v doesnt screw me). Now my question: where should i place which M.2? Since, from my understanding the STRIX supports 2 equally fast m.2. slots its down to which drive will generate more heat (upper slot seems to have a much beefier headsink). So should i put the Systemdrive under the better heatsink or the Gamedrive? Also if any of my assumptions are wrong please let me know. Thanks in advance, and have a nice day.
do you have any idea, how to boot from pcix controller, with that disk (crucial p3) when c602 (enterprise for x79) recognize the controller in bios but can't boot up from it? liked and subscribed. greetings from PL
I have an older ASUS Maximus Formula mobo…was looking at getting an asus hyper riser card you have pictured in your video. If i install this riser card in bottom x 16 slot….will it slow down my single slot graphics card?
My main worry now is finding tower with less lights than Blackpool, what is it, don't they let needs in clubs or something? If I am building and want to use all 3 nvme m.2 drives does this mean a ball ache of adding one by one? I also want yo add 4 x 32 gb DDR4 ram. Any advice please. Great video - very clear and easy to follow.
How come some of the M.2 slots have heat pads and other slots don't on the same motherboard? Does this impact performance?
@larryrodriguez1977
Жыл бұрын
for the most part it doesn't make a difference. And if you look all the m.2 slots have cooling. for this board.
@FreshtexBlackman
Жыл бұрын
Most board manufacturers put cooling plates like (MSI M.2 Shield Frozr) on the higher speed interfaces (PCIe 4.0) cause they run faster than PCIe 3 which means more heat generated, more expensive boards have cooling solutions on all or most NVMe slots cause you're paying more.
@phenos
Жыл бұрын
An high speed nvme SSD can throttle down in speed when a certain temperature target is reached, usually with long sustained data transfers. A thermal pad especially on the controller chip helps to dump the heat to a heatsink allowing it to maintain higher/full speed.
Curiously, the 1st M.2 slot you recommend people to install their drive to (the one closest to the CPU) is the slot one SHOULD NOT use on the ASUS STRIX z790-E board in particular, since this will limit the GPU to run at x8. I wonder if I will ever use that slot at all. Oddly, it´s the only PCI E 5.0 M.2 slot. Equipped with a beefy thermal shield. Since I haven´t built a PC over a decade, I´m intrigued by this, wondering if I am missing something important here. Any thoughts on that?
@josephaltman460
Жыл бұрын
I hated putting it into the second slot, since the first has the heat pipe!
@PinkasBrown44
Жыл бұрын
@@josephaltman460 I hate to be the one telling you, but I THINK both the 1st AND the 2nd M.2 slots share the same CPU lanes with your GPU. If I am not mistaken, you have to install in the 3 M.2 the furthest away, Corretct me, if I am wrong, but you might be running your GPU at x8 right now. Please send us feedback.
@drunkhusband6257
Жыл бұрын
z790 has more pci e lanes, it doesn't matter
Thanks for this video.
@TheProvokedPrawn
Жыл бұрын
You're welcome
The biggest problem is one you can have with hard disks as well: If you install more than one identical drive, nothing in the software gives you enough information to distinguish between them :-).
@nightmarerex2035
Жыл бұрын
expcialy stupid windows 10 and 11 that purposly screw up your duel boot even if you get the duel boot working properly at first windows say-ten or EL says no!
@bradhaines3142
Жыл бұрын
@@nightmarerex2035 dual* boot. they're not fighting each other
For example Z790 Aurorus Master and also some motherboard from ASUS share top m.2 slot with GPU PCIe slot, so it is not always a good idea to install disk to the top one.
@vincewilson1
Жыл бұрын
I have the Z390 Ultra Aurorus from Gigabyte.
@PeedPeeBody
7 ай бұрын
@vincewilson1 same here.. I am beginning to believe the bottom slot is best. My graphics card is installed into the top PCIEX16 slot. Also the bottom heat sink will be perfect for my new 990pro ssd 🤔
Can i install the drive heatsink that comes with the motherboard on the second slot?
Nice casing with funs :-) what is it. Please let us know the configuration of the beast with 10 funs in the case 🙂
Our 4TB gen 4 kept the Asus Prime TRX40-PRO S mobo from posting. It would throw an 06 Q-code and just hang. We updated BIOS but no-go. Only info I found was to reformat the drive first before install. Sounds like I need an NVMe portable drive now. Any recommendations?
thank you man!
@TheProvokedPrawn
Жыл бұрын
You're welcome Julian!
Just picked up a b760-i, which has the second slot on the back of the board. The second m.2 (gen4) doesn’t have a heat sink, should I get one?
You mentioned using NVME in all slots reducing GPU PCIE to 8x. As I understand it, there is no current GPU that takes advantage of using 16X. For reference I am using Asrock Taichi z790 and Asus Tuf Oc 4070n ti. I plan on using the top slot and at least 2 others for NVME installation. Thanks. Great video
@TheProvokedPrawn
Жыл бұрын
I've seen no negative impact from it
@Rancid_Ninja
Жыл бұрын
My board states only the first slot uses the CPU lanes the rest use chipset lanes so they do not affect gpu
@TimberWulfIsHere
Жыл бұрын
Not true at all. Put that 4070 in a pci 3.0 slot and see what happens to the memory bandwidth on the card.
@TheHumbleRoots
Жыл бұрын
@@TimberWulfIsHere ummm nobody uses 3.0 lol
@TimberWulfIsHere
Жыл бұрын
@@TheHumbleRoots you must be pretty fkin delusional to think that 100% of people are using minimum b550 mobos then.
Do you know if m.2 gen 4 is ok for a asus tuf a15 laptop or would a gen 3 be better
My cpu fan and rtx gpu is covering up my first nvme , so if I install an nvme I will not be able to use a heatsink can I use the bottom slot and still get the same speed? I will only be installing 1 nvme drive
I didn’t have a screw but I read on Reddit somones been using it without m.2 screw without any issues for a little over 3 years now sooo 😬 I’ll take my chances lol
Hi Sir, have you encountered any m.2 problem with this board? MoBo can't read my Crucial P5 m.2 SSD. Still finding answers. Thanks in advance.
I have a B650e-e gaming My top m.2 slot is 5.0 then my next down is 4.0 I have a WD SN850X 4TB so should I put in the 5.0 or 4.0 slot?
I am using second m.2 slot in motherboard. i want to switch to first m.2 slot. can just put to first slot? or i need to do somthing first...Plz Answer
Thank you!
@TheProvokedPrawn
9 ай бұрын
You're welcome!
Hi i have a HP 2015 ish with specs say SSD M.2 and the slot on the M/B is that NVME type with small 5pin and one long for the rest. I bought a NVME Gen4x4 with same 1 small and 1 long but it sort of very tight getting it into slot with it pushed against notch not middle of notch? i see 5 pins in slot (not 6) and my H/D has 5 on one side and 4 on the other. So is this right one as Laptop wont recognize? If k, i cant see anything in Bios about H/D and also tried Ubuntu on Stick and when temp loaded , it cant see drive either. Model HP 15-ba052au
Can you review the Lian Li 216 case?
Very informative, useful...
Hi question. I got a sata M.2 SSD and a M.2 NVMe SSD which is supposedly an upgrade for my laptop. But when I checked my bios the NVMe SSD is not showing on the list. However, when I have my HDD instead of the M.2 SSD, the NVMe SSD shows on the list. Any idea why this is happening? I was planning on making the M.2 SATA SSD to have my OS instead of having it on an old HDD.
Let me ask you this if I could... To start I have a asus rog strix x570-e(basically the same as yours) I have my C/boot drive in the top. It's running at 3.0x4. I just bought a new NVMe drive today. Can I/Should I move that first NVMe SSD to a lower port and put my new SSD in the top port? Or will that jack everything up? Like will my PC be looking at the old port like where the heck did everything go? Great video and thank you for the help.
Mm i just noticed that your cpu or gpu is not centered correctly or is it just the camera angle but it looks crooked
will the ryzen 5800x3d pair well with the msi x570s edge max wifi & a 250gb samsung 970 evolution plus with a 2tb 970 evo plus?