Thank you all for the channel support 🙏 stay tuned for more helpful videos don't forget to subscribe 👍

Technician do repair; mechanic do replacement. If one seal bad, just change the seal, why change the complete manifold? Money wasted.

As a landscaper I felt called out by that intro. I love it 😂

Thank you for this video, This video was a great help.

This was super helpful. Thank you very much! I took mine apart like you said and the Pistons move fine. I sprayed it with WD-40 bolted everything back on started it up but no water pressure. I had already ordered the replacement part then after an hour, I decided to try it one last time, and it started right up and with normal pressure.

@D-MAN107

20 күн бұрын

Fantastic!

Only thing I would really recommend is trashing the POS (gold colored) thermal relief valve, and buying a proper one. This gold colored one is made of some tinny type of aluminum or something like that, and can blow apart. Mine blew apart second time I used the pressure washer (the head got clean blown off). Get a CAT thermal relief, or any number of other proper brass units on the market. Just make sure the temp rating is similar at 140-145 F.

Everywhere I look you have to buy the whole pump. Looking for just the manifold for a 7112736. 3.5 GPM at 3600 psi.

Great video, I have a 4gpm simpson 4000psi with the triple A pump. It stop making pressure and I will give this repair a try

@D-MAN107

Жыл бұрын

Good luck!

@fernandoban5050

5 ай бұрын

did you fix it?

Great info thank you

@D-MAN107

Жыл бұрын

Glad it was helpful!

I have a 530010 AAA pump that is shooting water out between the brass head and block plus water in the oil. I shut it off as soon as I discovered it. It was still making good pressure. Just seals or something more serious? I bought a new pump for $368 but am interested in repairing the leaking one as a spare if it's cost effective. Advice?

You are an awesome man thank you sir

@D-MAN107

8 ай бұрын

Happy to help

Wow, that’s a $200 kit. Were the seals the problem on this machine or was the manifold damaged?

Thanks 4 the video

@D-MAN107

9 ай бұрын

No problem

Does anyone know where you can find the boost valve that's on the bottom valve on the end of the new manifold?

my triple A pump is over pressuring. When I start the spray it seems to overload the engine and boggs down. Any suggestions

Thanks for the info

@D-MAN107

Жыл бұрын

Any time!

Great video very straight forward thank you, I have very little pressure and the power washer pump oil is very milky in appearance, if I change the manifold like the video do you think this would fix the problem?

@karlosss1868

5 ай бұрын

Change the manifold AND the oil. 30 weight from memory.

Could I upgrade my 2.5gpm pump on the Honda 3700psi and if so what would be a good upgrade?

How about a video on adjusting the pump pressure and unloaded, on mine I can adjust the pressure by turning the black knob but how about the unloaded?

Hey man I want to replace just the seals and I'm having a difficult time finding them can you connect me with the link for just those seals

Thanks for making this video. Very informative

@D-MAN107

Жыл бұрын

Glad it was helpful!

I have a practically brand new 3700 it will build pressure, but looses after two seconds and stays out unless I let off the trigger and let it build back. Could this be my issue. It's only been uses twice

Do you know what size the 3 on top of the manifold are?

I wonder if this manifold will work on a Simpson Model# PS60995-S? What i see here in this video literally looks identical to the one that is on my machine except mine is black like the rest of the pump instead of that brass color.

I have a Simpson pump with the GX200 and a AAA pump and mine died after probably 10 hours. Zero pressure. I took it apart and o don’t see any bad seals so I’m not sure if mine is a bad unloaded or what’s going on.

@Winder Outdoor Power Where do I buy a seal kit???

Hey man. I have the PS3228 and it stopped providing pressure after the second time using it. You think this could be the issue? Same AAA pump. Apparently they’re garbage. No soap or anything ran through it.

Where do you get your manifolds from? I need a 7112736. 3600 at 3.5 GPM

I have a 3200 psi i am getting water to the pump but the pump is not pushing it through the pressure hose.i brought it brand-new and only used it twice

What’s the part number replaced?

Bought this thing a year ago… can’t believe I’m already dealing with this!! Of course the engine is bulletproof but wish they didn’t attach a POS pump.

@rickdff62

Жыл бұрын

Same bruh. Crazy thing is I used mine about a month ago, no issues but then go to use it today and WTF no pressure? It seems likeit has to be something more simple than this repair. If not, Imma gonna be pissed.

@anonimoporsiempre6033

Жыл бұрын

Same thing happened to me only a year after I bought and only I used for no more then 50 hours. 🤬 Honda Engine is going to last forever but the pump is trash.

@toddgifford5509

Жыл бұрын

I’ve seen the key missing on quite a few of these, right from the factory. If it’s brand new and you have no pressure, take pump off and check the key.

@josemorales8336

Жыл бұрын

​@@anonimoporsiempre6033 same here😡

@otrookie

Жыл бұрын

They’re cheaper for a reason. Cat pump is couple hundred more for a reason

You can use a 10mm allen on the hose connecter.

@alligator801

19 күн бұрын

How about the three on top?

I was looking at replacement manifolds. Are they really about 250 dollars? Is it possible to just replace a seal if it’s worn out to save all that money? Thanks for your time!

@D-MAN107

Жыл бұрын

They are expensive they can be rebuilt in most cases but it's a toss up.

Do you have a link to this kit?? So glad I found this video but the ones I’m seeing on Amazon are barely cheaper than replacing the entire pump.

@D-MAN107

4 ай бұрын

They are expensive

Have that exact unit, I cannot get suction through the tube that comes with it, for detergents. I inserted a wire and feel the spring inside...what's the trick please ?

@D-MAN107

Жыл бұрын

Try removing the gun and hose from pump and see if it pulls soap if it does then problem is with gun most likely. They need a certain amount of restriction to work properly and the only works with the blue or black soap tips.

On the off chance you see this could I get some advice? Mine had a loss of pressure so I took the pump off and springs and small metal disc's fell out. What caused the failure? And it looked like it had plastic crushed inside of the bores

@D-MAN107

2 жыл бұрын

Most likely got foreign debris passed through the system. Is the water inlet screen in place its probably missing I bet. Always turn water on and flush hose before attaching the hose to the pump just incase dirt,rocks,bugs get in.

@peterkroeker753

2 жыл бұрын

Ah ok many thanks new pump it is then thanks so much

i have dewalt 4000 psi model 4035 with AAA pump...unit starts fine first pull...blast of pressure then low pressure...cut unit off then it is almost impossible to start again even while squeezing trigger...any suggestions?

@D-MAN107

Жыл бұрын

Sounds like may need the carburetor cleaned. But if the pressure is down may also have a bad pump.

Great video , but where do buy the the kits at , I have a AAA 90037 can't fine a maifold kit , leaking water

@D-MAN107

Жыл бұрын

We sell parts

@juliocesargarciav

Жыл бұрын

@@D-MAN107 what is tour address?

@albertomoreno17

Жыл бұрын

@@D-MAN107website?

where is the best place to buy parts (manifold for simpson 4200 gx 390 power washer )

@D-MAN107

Жыл бұрын

We sell parts

Good video. The pressure manifold cost about $250. You can buy the seals for around $70

@D-MAN107

Жыл бұрын

Awesome

@anonimoporsiempre6033

Жыл бұрын

​​@@D-MAN107 New sub Thank you for your time and sharing your knowledge 👍🏼🤝🏼Do you know what brand will be 5he best brand of pump for this small type honda engine ? April-02-2023. 1:20am. ⌚🇺🇸

@nigelbeaumont1109

Жыл бұрын

No Shit…. Why buy a complete manifold?

@PARDS2

Жыл бұрын

FISHINBOB DO YOU STILL HAVE THE SEAL KIT CAT NO AND WHERE YOU GOT IT---THX!!!

@nigelbeaumont1109

Жыл бұрын

@@PARDS2 If you are asking me… I will gladly forward you that information

I have the exact same unit and it makes a burst of pressure and then no pressure at all. Any way to fix without buying a new head?

@FishinBob

Жыл бұрын

Replace the seals. Around $70.

@fernandoban5050

5 ай бұрын

@@FishinBob where do you buy the seals

Replaced this twice!!!!

We're having trouble, we took everything apart. One of the ceramics was cracked which we replaced and we don't see any other issues. We put it all back together but water is still leaking out of the bottom middle piston area and it seems like we're getting water into our oil. Pressure is very low compared to normal. Any suggestions?

@D-MAN107

4 ай бұрын

Best thing is a manifold assembly replacement.

@mrspunk61

4 ай бұрын

@@D-MAN107 thanks, what about the water in the oil? Seems like another issue?

Where did u buy the o rings ?

@D-MAN107

Жыл бұрын

I'm a dealer

I’m getting water in my pump. Window showing oil turning milky. I change well before it needs it. Any idea where it could be failing???

@D-MAN107

Жыл бұрын

The seals in pump is worn.

Are you located in Winder, Georgia?

@D-MAN107

Жыл бұрын

Yes

Are you in Winder, GA? Also what is the long black knob on the pump. My Simpson has no instructions of any kind about the pump.

@D-MAN107

Жыл бұрын

Yes we are. That would be the pressure adjustment knob.

Manifold $219. Whole pump with manifold $249.

A complete new pump its $260 and the manifold its $229 why?

@D-MAN107

Жыл бұрын

🤦‍♂️

@anonimoporsiempre6033

Жыл бұрын

Because they want you replace all the unit instead just have of it 😈😈

Blessed from the bust

Hey where do you buy this kit I need one

@D-MAN107

2 жыл бұрын

Local dealers

@kevinsimpson6698

2 жыл бұрын

Can anyone tell me where did they purchase the manifold kit. It seems like I cannot find this kit.

99% of the time you replace the manifolds?

@D-MAN107

8 ай бұрын

For warranty yes