Check out my other Ryker videos kzread.info/head/PLG-jfoRyI2SEj30YT16MH789UWLYN1J8s

Gonna get one, soon! Didn't like the feeling on the highway moving around in my lane. Not a great ride on bumpy roads and will be using it on max setting, too. Rather have it more stable than easier turning. And I need a reminder to start working out again. 🙂

Put it at eight, and you'll really really like it. It offers a really good balance on steering and handling

@slowridertv

2 ай бұрын

Thanks for the tip. I'll be trying that next time

Thanks for putting out this vid.. I’ve been really wondering about it. I just started riding and have felt what ur describing before the steering damper.

I'd say you're wrong about new sway bar end links not making any difference, judging by my personal experience. When I replaced mine, it increased the speeds I was comfortable with on my local rough roads by at least 5 mph. I don't think the problem was the material the OEM ones were made of, though. The swivels at each end were so stiff I had to place an end link in a vice and stick a long screwdriver through them, to move them. I could move the swivels on the new ones with the end of my little finger.... Later, changing out the sway bar added another 5 to 10 mph to my comfort zone. And I just received my steering stabilizer, so we'll see what that does....

I like the Stab, for highway in sport mode , is great at low speed i dont see much of a change, I use it in 8 that is good for me. Alain & Yellow

On back road driving I set it on eight, but if I’m gonna be sitting on the interstate for several hours - which I do often - I crank it up to 10 to 12 and it rides on rails

@soumynonareverse7807

Ай бұрын

What happens if I put the front suspension on setting 1 and the rear much higher. How likely is it for the Ryker to turn more like a motorcycle does? Do you have any experience with a different reverse trike of which the main body can swivel so it drives more like a 2 wheeled motorcycle? Or maybe a sidecar-like setup without the actual sidecar body (just the frame)?

I beg to differ, when it comes to sway bar ends. Changing them out on the 2019 Ryker 600 I recently bought upped my comfort zone on bumpy roads and curves between 5 and 10 mph. I'm currently awaiting a sway bar from Baja Ron, that I expect to improve the handling even more....

How long did it take to install and what is the level of difficulty for the install?

@slowridertv

2 ай бұрын

About an hour or two for the install. The. most difficult parts were getting everything lined up correctly, and figuring out how to get my fingers to reach upside down to install a couple of the bolts.

What brand and length is the stabilizer?

@slowridertv

2 ай бұрын

Here is the link to the product. It has brand and sizing information. rykermod.com/products/rykermod-steering-stabilizer-damper-bracket-kit-with-jfg-racing-stabilizer