Does 2 Stroke Oil Stay Mixed In Diesel TSO Diesel Mix
Автокөліктер мен көлік құралдары
Does 2 Stroke Oil Stay Mixed In Diesel TSO Diesel Mix. We look to see if 2 stroke oil when mixed with diesel and left alone stays mixed. amzn.to/2CHbXV1 and for the fuel transfer pump amzn.to/3E2WFYW
This is not an instructional video and is intended as entertainment purposes only. Always get professional advice before tackling any DIY project. DO NOT DO THIS YOURSELF. You have been warned. Serious engine damage can be caused by adding 2 stroke oil.
Пікірлер: 40
Thanks for making this video, can’t wait for the synthetic tast
@fiveminuteman
3 жыл бұрын
If mixing semi synthetic with petrol is anything to go by i cant see diesel mixing at all with fully synthetic.
The best videos are the least well known. Top notch m80
@fiveminuteman
2 жыл бұрын
Thanks 😀👍
My T4 1.9td likes this 👌
Fantastic effort here buddy - thank you!
@fiveminuteman
3 жыл бұрын
No problem. Need to crack on with a semi-synthetic test next.
@Lucentlens
3 жыл бұрын
@@fiveminuteman Nice one buddy! I'm from the UK (Northants), FYI.
@Mr_V989
3 жыл бұрын
i do JasoFB(mine is green coloured) cheap 2t oil in my pd140 200ml on an almost empty tank then fill this up with 50L of regular diesel, i do this for over a year no issues everything runs great hope that continues that way.))
@Lucentlens
3 жыл бұрын
So here's hoping that this particular video & comments thread becomes a bit of a decent resource on the question of 'dosing diesel with 2-stroke' - starting with the essential myth-bust here, over whether or not mineral 2-stroke will separate & pool in the tank - 👍🏽. Adding to that knowledge-base then: Fine, it's argued to Eternity, whether or not it harms or benefits the engine, etc, etc. That'll likely remain inconclusive forever. However - I do have an example of a situation where 2-stroke dosing into diesel has completely eliminated a starting problem, caused by a sticky SCV (Suction Control Valve). A known problem on the Toyota Auris 2.0D4D - starting issues in the cold. Warming the SCV would solve the problem - but *so has 2-stroke dosing of the diesel* (1%). The logic is clear - the SCV has a metal piston in a metal sleeve. The extra lubricity has clearly prevented the sticking. I can even recreate the problem by ceasing dosing (next tank or more on). So - we have an example of a definitive outcome (I say benefit) of dosing, on the fuel-supply-side of things, at any rate.
I use Walmart's 2 stroke ash-less oil for my 2011 6.7 Cummins. One Gallon last me a bout 1 year., but I drive very little.
Using 2t fully synthetic from years. Engine working more quietly and fuel consumption gone down. I doing massive mileage so had many opportunities to compare results. My friend who runs taxi business using it from years and never had a usual DPF and injector problems, but again; fully synthetic
@fiveminuteman
2 жыл бұрын
That's interesting to know, i thought that fully synthetic didnt mix with diesel well and normally gathers in the bottom of the fuel tank.
@jg1003
2 жыл бұрын
@@fiveminuteman it mix as normal, however to make sure that everything will be fine I always adding before refueling. Also, don't forget that fuel pump working all the time with efficiency of 120-250 litres per hour, so fuel is in continuous mixing process anyway.
@tmarinelic
Жыл бұрын
0.5%?
@aydinmuslumzade1023
Жыл бұрын
hi sir, how much oil do you add to how much fuel? Can you tell me the brand of oil?
@moorgary2163
Жыл бұрын
Do you think commonrail systems can take it also? Id like to prolong injector life. Example 1.4 Tdi 2007 Thanks, Aron
That was a huge mix of oil, but you can gently rock the vehicle several times and the fuel sloshing will handle it.
My VP44 likes this
Repeat with any 2S, jaso-fd+ fully most advanced racing synthetic mix perfecto with petrol and diesel. I have bottles on my shelf with, petrol, diesel and toluene (white spirit), and 2S synthetic stay on mixed like on day one.
@fiveminuteman
Жыл бұрын
Yeh man!👍
@Fosgen
Жыл бұрын
Best for diesel are 2-ehn as cetane boosters and esters to increase lubricity. You can skip on esters as there is 7% biodiesel in diesel anyway. Add 2mL 2-ehn to every liter of diesel. Plus 8 to 9 cetanes, happy motor.
Monzol 5C
So did you test with synthethic or semi synthetic 2-stroke oil?
@fiveminuteman
2 жыл бұрын
Not yet😃
I can add 500ml 2T oil in 60 litter of diesel for euro 6 bmw engine? One injector is about to fail because bad quality diesel from my country.
@fiveminuteman
2 жыл бұрын
Not sure i would do that. I stopped using 2 stroke in my 17 year old van. Now use BP Ultimate diesel. If you have any warranty you would invalidate it. You also have a DPF that could cause problems and also not sure about adblue. Dont do it.
@saynotothegreatreset
11 ай бұрын
That a bit to much, I do 250 ml in my f31 330d for 2 years now and I had no problems ever so quiet
@StipicaLuketic
10 ай бұрын
1:200 ratio
Isn’t that just the dye?
@fiveminuteman
5 ай бұрын
Nope, still have the glass in my garage.
Are bhai diesel me dal sakte hai ki nahi batto bhai
@fiveminuteman
2 жыл бұрын
Cheers man👍
0:29 you already made a mistake!!!! ADD 2 stroke FIRST!!!! It mixes when you add the diesel…. By doing diesel first they DONT mix!!!!! This automatically made me not trust you or any advice your going to give
@fiveminuteman
2 ай бұрын
You are 1 big mistake, 2 stroke added after in tgis case to show how it mixes after! Real world adding after isnt a biggy as it mixes by itself with slopping of fuel. You need to calm down!