Exactly what is going on with mine. You may have just saved me $1000 bucks! Awesome!

Good job!you just saved me $550 in parts.also for calibrating the Steering angle sensor is to turn the clock spring all the way to right then turn it back 3 and half times.and you should have extra 3 and half times space to turn it all the way to left.if you turn it more it would brake the wire inside for air bag.air bag wire is the shortest wire in all the wires inside.

Good work that man fixing clock spring.

Nice 1. Step by step so this encouraged me to have a go. I did manage to fix it, ( turn off airbag warnin light) although it seems I'd a slightly different problem. And working on a different vehicle, Rebault Master, but steps all the same near enough however I could find no broken, cracked or frayed wires or pins in need of soldering or fixing, but what I did do while I was at it was to clean up all the plugs and electrical connections before putting it all back together and this seems to have done the job. Might try this 1st before taking all apart if ever going at it again. So good oul WD40 comes to the rescue again and saving €250 on parts from manufacturer whenever he managed to get them in. Thanks for very helpful vid also, cheers.

Man thank you saved my life

@LuLu-eb7lt

Жыл бұрын

Just buy a new one, it’s like $60

@domowywarsztat

Жыл бұрын

@@LuLu-eb7lt I needed a car for a weekend one day to repair I prefer to repair than buy new

Beast ass repair dude. Very impressive

@fixxxer6484

6 жыл бұрын

Tnx man!

Good job you confirm what I was doing but I needed to confirm and you did that for me thank you.

We can use the spare loop, if available. I have done so in my toyota fortuner and innova. I traced four wires unused, and I made a bypass through them.

Excellent repair!!!

Absolutely amazing explanation step by step, well done

Hell yeah man I appreciate the video my ford started doing this and the auto parts store doesn't sell my clockspring only dealer and junk yard

Nice job....so they are repairable....gotta do mine

@fixxxer6484

3 жыл бұрын

Not really designed to be repaired, but as you see, can be done. Mine still works 💯 after I redone all contacts, even those which were good at the moment. Eventually they all gonna break. Just do them all while you there.

Great video, gave me the confidence to do my own worked out great on a CTS-V 2005

For safety you NEED to disconnect the battery

Thanks for this nice video I will try to fix it but my question is how much heat device is used?

@fixxxer6484

5 жыл бұрын

I can't tell you how much heat exactly I used, but small soldering gun would work. Its really small contacts, so you don't need lots of heat. Don't go too crazy so you won't melt all around repair area. Best of luck!

@abadi7926

5 жыл бұрын

Fixxxer ok Thank you so much again ☺️

What results in folding of clock spring cable in Hyundai sonata

Blessed mind

Good job but never open the air bag assembly without disconnecting the battery negative wire.

Thank u 4 the video i got a grand caravan Same problem. But 1 question. Where i can get the song bits sound great! Thank u again!

@fixxxer6484

5 жыл бұрын

Thanks man, go to our page on soundcloud here: soundcloud.com/the-red-squad/tracks

You should use something more like Super Lube grease that is safer around plastics.

Nice post 🙏🌹🙏

Good video, use silicone grease on electronics.

Do i have to set clock spring rotation halfway before installing it? Just worried it might break the ribbon if not properly set while steering it .

@globuslive

5 жыл бұрын

Yes, you do have to. In the video I explain how you have to have at least two turns each way. Go to 13:10.

Thank you for video. I am not very mechanical but I am going to try the fix. Could you please explain again where the steering angle sensor is located and how not to disconnect it? It seems like this is an important step. I know you explained it at the very end but could you please give me some more detail where it is and how not to screw that part of it up. Because I do not have a scanning tool to reset, I don't have any friends that have a scanning tool either. I would have to take it to a dealership. Thank You Again, by chance do you have any other videos on dodge ram repairs?

@fixxxer6484

4 жыл бұрын

Check out my conversation with Guilherme Martins, I explained here in comments where the sensor is, and couple other related things. Just look the comments up.

@marcusslaten8806

4 жыл бұрын

By chance did you disconnect your battery before starting to pull the steering wheel off. I have seen videos some disconnect the battery some don't, what's best. I am assuming not to disconnect the battery because you need to use the scan tool?

@fixxxer6484

4 жыл бұрын

@@marcusslaten8806 if you're not much experienced in car repairs I would suggest you to disconnect it, before you unplug steering wheel airbag. You might need to turn steering wheel left and right, and it's easier on running engine, so after you remove bag, right before disconnecting it, put your wheels straight and then disconnect the battery, and then bag connectors.

And... does it still work? I bet it will break again soon, either directly next to the repair spot, or at another kink. That ribbon cable is worn. But finally a nice vid showing how it works

@globuslive

5 жыл бұрын

It broke in another spots, not the same wire, so I took it apart again, soldered all of them, 40k miles after that, still works as new.

Hey Bro you should make a video but with a 2015 Silverado

@fixxxer6484

3 жыл бұрын

Do Silverados have common issue with that too?

Mine on my 2014 is clicking when turning. Do you think the grease is all dry?

@fixxxer6484

4 жыл бұрын

Possibly it's column itself, not the clockspring, not sure. But very few chances it's dry, even so, not much to click inside of clockspring. High chances it's something else

@blakeerdmann

4 жыл бұрын

@@fixxxer6484 I don't think it's the column it definitely sounds like plastic scratching plastic. Definitely coming from right behind the steering wheel

@fixxxer6484

4 жыл бұрын

@@blakeerdmann take steering wheel off, and inspect it. With wheel on, it's hard to tell what's going on under it

@misaelroman1215

3 жыл бұрын

@@blakeerdmann Im going thru this right now, did you figure out if it was the clock spring or not?

@blakeerdmann

3 жыл бұрын

@@misaelroman1215 no. Sometimes it does it and sometimes not. Im thinking it's the clockspring though.

How did you get the two connectors for the ribbon cable off?

@fixxxer6484

10 ай бұрын

If you mean the ones that stamp welded to the housing, then you just carefully pry them, or cut welded area with utility knife

can someone explain me urgently? is repairng these products healthy? i mean do OHM values of the circuit change do the repair work?Maybe airbag triggering timing change ?Am i right?

@globuslive

2 жыл бұрын

It might, but as I know the airbag being triggered by high current, so it shouldn't be hurting deployment timing.

Do you remember what scan tool you used?

@fixxxer6484

8 ай бұрын

I used Autel, but anything alike that can read steering wheel angle sensor would work.

Hello Sir, i'm having real difficulties to remove the two black connector from the plastic housing where the wire strip is connected to. Can you help me with that please

@globuslive

5 ай бұрын

Use something like credit card or guitar pick, they have locking tabs on the bottom. So insert card between connector and the housing. It's tricky a bit. Don't force it too much, or they would break. They work even broken, but better to save it. The one that closer to the wires, should come off first. Hope it helps

@flowless1753

5 ай бұрын

Well I have broke it 🤣 but yes finally I think i got it. Mine was completly riped off, I have to figure out by logic which wire goes to which connector. After 4h i think i finally got it omg

Part number for the ripen for the Dodge ram ,1500. 2015

My reverse camera is off ligned. Do you think if i put new clock spring it will fix it?

@fixxxer6484

3 жыл бұрын

I dont really understand what's happening to your rear camera

@fivestarhemi2877

3 жыл бұрын

Fixxxer you know those yellow lines that pop on the screen when when you put the vehicle on reverse? There supposed to be straight just like the steering wheel right? Well i got my steering column replaced at some point and then after that the reverse camera was not the same no more, the yellow limes do not match up to the steering wheel

@fixxxer6484

3 жыл бұрын

@@fivestarhemi2877 do you have traction light on on the dash right now?

@fivestarhemi2877

3 жыл бұрын

Fixxxer looks like a Christmas tree to be honest, even the check engine light came on

@fivestarhemi2877

3 жыл бұрын

Fixxxer i will do a video when i have a chance & tag you. Thanks in the meantime

If i send you mine can you fixe it? Its from a 09 g8 gt?

@fixxxer6484

3 жыл бұрын

Sorry man, too busy with my never ending projects. My brother had some issues on his g8 few years back too. But I didn't get involved that time

@JesusRangel-kn8hl

3 жыл бұрын

@@fixxxer6484damm it, the problem is that,i cant find a replacement part not even om the dealership, does your brother have a chanel so i can ask him?

@fixxxer6484

3 жыл бұрын

@@JesusRangel-kn8hl he doesn't. What's your issue? Tell me I'll ask him. He had issues with some switches I believe. He got another steering wheel, and either side didn't work, If I recall correctly. Try Australia. They are flooded with g8 over there. AU eBay might work for you.

@JesusRangel-kn8hl

3 жыл бұрын

@@fixxxer6484 well the issue is te clock spring, no power on the steering wheel, air bag light on, and buttons dont work, i know they have a car name holdem ve but im not sure if it fits on mine since the part number doesnt match

@fixxxer6484

3 жыл бұрын

@@JesusRangel-kn8hl if you find the one that looks the same as yours with buttons, it should work, even parts numbers won't match. Or you might consider to get entire steering wheel with clock spring included.

I imagine this is the same concept as the dodge chargers right?

@fixxxer6484

2 жыл бұрын

It should be. Especially same brand. And if they have same supplier, it should be very similar part

m audio workstation 88

@fixxxer6484

4 жыл бұрын

It is ))

Gracias... No music please...

Video is very good. It would've been great if you didn't use the distracting and annoying background music though.