Excellent video and spoken directions! I've summarized the steps, so the job can be done following written instructions: STEPS: 0. set front wheels to hard right turn 1. remove screw below mirror, accessed when door is open = torque screw T27 2. pry triangle cover above mirror by picking at top corner w slim wedge tool; angle out piece and then pull straight up to remove --has small tab on rear side of triangle c1&1/2" below top point, so wedge this out --then remove the 2 mirror screws but use them to hold mirror out of way 3. remove 10MM metal screw that holds fender to van body there 4. remove 3 more 10mm screws under hood at center of fender 5. lower hood enough to access last top screw behind hood hinge --a 10mm circular wrench with angle on neck seems to work fine --this and one of the others hold hood hinge base to fender, so beware of it shifting out of place 6. remove torque screw T25 that holds windshield base cover next to antenna 7. remove 2 phillips screws on lower rear fender side 8. pry 2 remaining rivets that are in that area 9. at the rear side underneath van, remove cheap hollow nut on stud holding plastic trim there --!!!need a deep seated socket or open-ended or circular wrench --?10mm 10. now remove that stud and metal screw next to it 11. remove heat shield to access last rear-side screw, coming from wheel-well side to upper location 12. turn front wheels enough to left and remove 2 phillips screws on fender front-side of wheel well 13. remove long 8MM screw that binds fender to front bumper underneath it --a 4" extension helped the ratchet 14. remove headlight, to access 8MM nut that binds fender to front grill at mid level 15. remove 2 screws at front bottom of fender, underneath where the nut just got removed 16. unscrew top of antenna; remove chrome ring-nut and black outer base on antenna base 17. pull fender up over antenna base

@QuiteAlright

2 жыл бұрын

Thanks for doing this. Great Job. I've pinned your comment to the top so everybody can see and follow the instructions

This is by far the best video I've ever seen on You-tube . And Ive seen a LOT .

@QuiteAlright

Жыл бұрын

Thanks :) I appreciate your comment

Amazing video. Thank you for taking the time to demonstrate

@QuiteAlright

4 ай бұрын

My pleasure! Thanks for watching

Great video to watch before taking yours apart. Thanks, it helped me a lot!

@QuiteAlright

3 жыл бұрын

Great to hear!

Great video!!! I have to do this for both sides soon. Dodge puts so many screws everywhere to complicate the simplest things. Thank you for making it easier before I get started.

@QuiteAlright

Жыл бұрын

Thanks and good luck. It is quite a big project replacing both sides, but just follow this video and you should be good

This is one of the best demonstration videos I've had the pleasure of watching. Your instructions are on point! Great job!! Subscribed :-)

@QuiteAlright

3 жыл бұрын

Thank you Lisa :)

That was a fantastic how-to video. Absolutely perfect! It lets me know that I should just try to patch the rust on my fender, rather than replace it ...lol. Thanks again. I've subbed your channel. Good luck.

@QuiteAlright

2 жыл бұрын

Thanks for watching and for the sub. Replacing fenders is always time consuming and a bit of headache :)

Excellent video. Very detailed. Nice job QuiteAlright!!!

@QuiteAlright

3 жыл бұрын

Thank you kindly!

Thank you for this informative video!

@QuiteAlright

2 жыл бұрын

You're welcome

Great video it was a big help not having to hunt for bolts!!

@QuiteAlright

3 жыл бұрын

Glad to hear it!

Very,very good and useful video - Thank You!

@QuiteAlright

3 жыл бұрын

You are welcome!

You're welcome, QuiteAlright. I used your video to replace my right fender, after a fender bender. Thank you for the detailed video that guided me!

@QuiteAlright

2 жыл бұрын

Thanks for watching and I'm glad it helped

Thanks for taking the time to do this , very good instructions

@QuiteAlright

2 жыл бұрын

You are very welcome

I needed this

Another great video! Very detailed. Thank you

@QuiteAlright

Жыл бұрын

My pleasure!

Helped a lot thank you sir

@QuiteAlright

3 жыл бұрын

Glad to hear that

Thank you, very informative

@QuiteAlright

2 жыл бұрын

You are welcome!

thank you very much for this guide

@QuiteAlright

3 жыл бұрын

No problem!

Great videos with no goofy hey look at me, watch me talk about stuff that doesnt matter for 5 minutes before getting to work like alot of others do on here, I dont have time for that get right to the job and the point, Ive used him twice so far for different things without realizing it and now Im following, I could not figure out how to get that rear fender bolt out behind the hinge it was so easy after watching that for a few seconds - I also have the same maroon 2006 caravan he does thanks again

@QuiteAlright

5 ай бұрын

You're most welcome and thanks for supporting my channel :)

thank you!!! great video

@QuiteAlright

3 жыл бұрын

You're welcome!

Amazing! Thank you

@QuiteAlright

5 ай бұрын

You're most welcome

Thank you buddy

@QuiteAlright

Жыл бұрын

No problem 👍

Thank you

@QuiteAlright

2 жыл бұрын

You're welcome

I have a 2005 Dodge Grand Caravan I had some front work done. They didn't put the front fender screws back in. Do you know what size screws i can use.

$309 for new now summer 2024

if the antenae is seized, its a BITCH to get off,

Great video !

@QuiteAlright

Жыл бұрын

Thanks!