PSDesigns goes through the process of installing their wickerbill on a 2015 Dodge Challenger. Check them out on eBay!! User: PureSportsDesigns
Жүктеу.....
Пікірлер: 56
@jordanparker8359 Жыл бұрын
I like these guys even more now! Not only is he a MOPAR guy but he also carries pro 2nd amendment and pro Mopar I like it. Awesome video and awesome products thank you PSDESIGNS
@CopperBroome3 жыл бұрын
Just installed mine! Took 35 mins. Looks great! Jerry is a super cool guy too! Thanks!
@MrKen1111111111 Жыл бұрын
I bought this for my Challenger Hellcat. Everything came undamaged and went right on thanks to the insert compression tool that was inclded! Ten minute install from start to finish!
@tommypetley95683 ай бұрын
Just got mine in the mail. Going to be installing it today thank you for the tips!
@6.0Flare3 жыл бұрын
Mine just came in today!!! Can’t wait to get it on
@daleturner3507 Жыл бұрын
Just bought one today can’t wait to see how it looks on my car.
@jonathanweaver14123 жыл бұрын
My old ride right there, driving and charger now. Had to come back to PS Designs.
@tankramirez7093 жыл бұрын
Bought mine from you thanks and thanks for video to help me
@papag54335 жыл бұрын
a black paint marker on the outside edge when done cleans up the cut edge real nice
@lieutenantorion64754 жыл бұрын
Can’t wait to get mine.
@sixpacksandsrts9122 Жыл бұрын
I spent an out sanding the edge from 120 up to 1500 then hand polish. Made a world of difference
@jameskaitlyn44702 жыл бұрын
Getting ready to install mines now 🤟🏾
@aaronferguson474 жыл бұрын
I just recently purchased one from your website on eBay bout 2 weeks ago
@michaelblue31722 жыл бұрын
Just got mine today!!!
@danielcalvillo33953 жыл бұрын
just got mine today for my charger !
@yungswagg8848 Жыл бұрын
Mine just came for dodge charger, installing tomorrow got it from eBay. I’ll b back with my review
@Alanreyes-jm1pn9 ай бұрын
Just bought one thanks
@LuisDiaz-gq2nf4 ай бұрын
Ain’t nothing like driving a challenger!!! After a six pack of Boston logger!!!!! Ahhh the American Dream
@pedrob52514 жыл бұрын
DO you have an option for black hardware or have any bolt information to locate black hardware?
@willholland38863 жыл бұрын
Just installed mine lastnight love it easy install. What all makes & models do you make these for ?
@missaelcandelario93 жыл бұрын
Is there any right way of where the center smoke piece goes ? Can I put it before the wickerbill?
@chrispelkey4021 Жыл бұрын
i seen on your charger video you used 2 pencils to keep it level. but i didn't see that used anything in this video to keep the wicker bill level. any thing needed to keep this level ?
@ingridflores42374 жыл бұрын
does the ribit tool comes with the wicker bill now if purchase
@dougwatson64064 жыл бұрын
Really like the Wickerbill except the entire edge is very sharp and should be smoothed to prevent cuts!!!
@aztecgold62 жыл бұрын
What size rivnuts do you use, 25/64? And where can i purchase rivnuts?
@p_drizzytv3 жыл бұрын
How many pieces this spoiler comes with?
@robertjames76092 жыл бұрын
How do I buy one for my 2016 Dodge Challenger with camera?
@benbrunner77303 жыл бұрын
Ok but how do you install it on an older Chrysler 300
@mgarcia64163 ай бұрын
Can you still take the car through a car wash after install ? Will it break ?
@isaiahpalomo65093 жыл бұрын
Can this fit on a charger
@brians9272 Жыл бұрын
Anybody have any issues with the wicker and car wash? I want to do it but that’s the only thing stopping me
@Kaptions_Kaught4 жыл бұрын
DOES THIS FIT MY 2019 DODGE CHALLENGER GT?
@jesussalinas434
3 жыл бұрын
Yes
@robertjames76092 жыл бұрын
Are these safe in a car wash?
@illuminatedperspectives2894 Жыл бұрын
cool im from dayton ohio
@BADDGPA2 жыл бұрын
locktite?
@jessemott482010 ай бұрын
Idk what happened but that 25/64 was Too BIG I ended up having to use gorilla glue on the rivets to hold them in place
@borri68
4 ай бұрын
First and only time I used a riv nut many years ago, it came with no tool at all. I drilled the hole exactly to what they said and the riv nut was loose in the hole. It was suppose to be loose. I figured out how they work and expanded it until it was a snug fit. Then continued expanding it until it was done. Your hole was fine.
@Cubanogar4 жыл бұрын
I ordered on ebay from you guys and haven't received shipping details?
@PureSportsDesigns
4 жыл бұрын
The Heavy Hand everything ships on time. Please send us a message on eBay so we can look you up by your username. Thanks! Jerry
@Cubanogar
4 жыл бұрын
@@PureSportsDesigns Thank you, just sent message on ebay.
@53Ohhh2 жыл бұрын
What size are the rivet nuts?
@PureSportsDesigns
Жыл бұрын
Rivnut thread is 1/4-20 standard threads
@mrrr40710 ай бұрын
Instructions were not clear my wicker bill split 😅
@mopar392ta32 жыл бұрын
Would you be interested in sponsoring my TA 392?
@ashleyrezek86264 жыл бұрын
Can you spray paint the cap screws
@rhyheemrushing29
4 жыл бұрын
Yes I did on mine
@alejandro-th8ls3 жыл бұрын
Le queda a un dodge charger
@insomniahobbies4 жыл бұрын
Ewww, you carry a Khar?
@lose77043 жыл бұрын
Would it fit for my 2018 charger ?
@PureSportsDesigns
3 жыл бұрын
As long as you have the SRT type spoiler.
@PureSportsDesigns
3 жыл бұрын
www.eBay.com/str/PureSportsDesigns
@borri684 ай бұрын
Looks cool but probably kicks the sh!t out of your gas mileage. I know, nobody cares about gas mileage.
Пікірлер: 56
I like these guys even more now! Not only is he a MOPAR guy but he also carries pro 2nd amendment and pro Mopar I like it. Awesome video and awesome products thank you PSDESIGNS
Just installed mine! Took 35 mins. Looks great! Jerry is a super cool guy too! Thanks!
I bought this for my Challenger Hellcat. Everything came undamaged and went right on thanks to the insert compression tool that was inclded! Ten minute install from start to finish!
Just got mine in the mail. Going to be installing it today thank you for the tips!
Mine just came in today!!! Can’t wait to get it on
Just bought one today can’t wait to see how it looks on my car.
My old ride right there, driving and charger now. Had to come back to PS Designs.
Bought mine from you thanks and thanks for video to help me
a black paint marker on the outside edge when done cleans up the cut edge real nice
Can’t wait to get mine.
I spent an out sanding the edge from 120 up to 1500 then hand polish. Made a world of difference
Getting ready to install mines now 🤟🏾
I just recently purchased one from your website on eBay bout 2 weeks ago
Just got mine today!!!
just got mine today for my charger !
Mine just came for dodge charger, installing tomorrow got it from eBay. I’ll b back with my review
Just bought one thanks
Ain’t nothing like driving a challenger!!! After a six pack of Boston logger!!!!! Ahhh the American Dream
DO you have an option for black hardware or have any bolt information to locate black hardware?
Just installed mine lastnight love it easy install. What all makes & models do you make these for ?
Is there any right way of where the center smoke piece goes ? Can I put it before the wickerbill?
i seen on your charger video you used 2 pencils to keep it level. but i didn't see that used anything in this video to keep the wicker bill level. any thing needed to keep this level ?
does the ribit tool comes with the wicker bill now if purchase
Really like the Wickerbill except the entire edge is very sharp and should be smoothed to prevent cuts!!!
What size rivnuts do you use, 25/64? And where can i purchase rivnuts?
How many pieces this spoiler comes with?
How do I buy one for my 2016 Dodge Challenger with camera?
Ok but how do you install it on an older Chrysler 300
Can you still take the car through a car wash after install ? Will it break ?
Can this fit on a charger
Anybody have any issues with the wicker and car wash? I want to do it but that’s the only thing stopping me
DOES THIS FIT MY 2019 DODGE CHALLENGER GT?
@jesussalinas434
3 жыл бұрын
Yes
Are these safe in a car wash?
cool im from dayton ohio
locktite?
Idk what happened but that 25/64 was Too BIG I ended up having to use gorilla glue on the rivets to hold them in place
@borri68
4 ай бұрын
First and only time I used a riv nut many years ago, it came with no tool at all. I drilled the hole exactly to what they said and the riv nut was loose in the hole. It was suppose to be loose. I figured out how they work and expanded it until it was a snug fit. Then continued expanding it until it was done. Your hole was fine.
I ordered on ebay from you guys and haven't received shipping details?
@PureSportsDesigns
4 жыл бұрын
The Heavy Hand everything ships on time. Please send us a message on eBay so we can look you up by your username. Thanks! Jerry
@Cubanogar
4 жыл бұрын
@@PureSportsDesigns Thank you, just sent message on ebay.
What size are the rivet nuts?
@PureSportsDesigns
Жыл бұрын
Rivnut thread is 1/4-20 standard threads
Instructions were not clear my wicker bill split 😅
Would you be interested in sponsoring my TA 392?
Can you spray paint the cap screws
@rhyheemrushing29
4 жыл бұрын
Yes I did on mine
Le queda a un dodge charger
Ewww, you carry a Khar?
Would it fit for my 2018 charger ?
@PureSportsDesigns
3 жыл бұрын
As long as you have the SRT type spoiler.
@PureSportsDesigns
3 жыл бұрын
www.eBay.com/str/PureSportsDesigns
Looks cool but probably kicks the sh!t out of your gas mileage. I know, nobody cares about gas mileage.
Get to the point already.!