WTFOS devs have announced that the "reboot" bug has been fixed.

@Ez.Engineering

5 ай бұрын

Is there diferent version of supperpack which needs to be install to fix this reboot issue ?

When I was in this hobby over 10 years ago I was watching you, and here we are again as I’m getting back into it and you are still here. Kudos.

Just a message to say thousand of thank you Joshua ... i started the FPV fews week ago ... and with you everything was clear and easy ! Specially this video help me to pass my beta95x vista in WTFOS and using in the same time my MARK 5 O3 ... and everything is working perfectly ! so thank you again i will of course giving back everything you give to us !

FPV wouldn't be the same without you, hats off to you for your persistence and professionalism!

Thank you Joshua! Your advice has been invaluable to me (and continues to be).

Bardwell... as always, Your the MAN! I wouldn't be flying FPV if it weren't for you and your vids. THANK YOU!

Thankyou JB for all the work you do 😊

I literally have bees looking for a video like this for like a week now!!

Greetings from switzerland😊 thank you for your always great content! Always nice to learn something today

Hi Joshua! It's pax!! I came across your channel and it is awesome! Great job!!

@JoshuaBardwell

10 ай бұрын

Oh hi. Nice to see you.

Fantastic. I have two V2. One for audience mode. One has terrible version so no longer works with others. The other has lower firmware version. Neither have been WTOF. This is awesome fix for all issues.

So I didn't know about the Vista thing, and I went right to this process with a brand new out of the box unit. Now I have the constant red light of death on my smoked Vista. The first time hearing anything about that was after watching this video in an attempt to figure out what I did wrong. Expensive mistake on my part. Just an FYI for everyone. You absolutely can brick a Vista, and, no, butter will not undo it.

That lil laugh Joshua does at the point of talking about rooting the vista!! $$$

Love it!

Yes - magic feature!.. V2 - still one of the best

Thanks!

Another awesome informative video Mr Bardwell. However, I'm about to remove wtfos from my v2's as I've decided to sell my airunits and I'm only using the 2 quads I currently own that have the 03 units installed.

Soooo is there a video of getting the O2 OSD display on the goggles 2? Just a ton of knowledge here - thank you for making it!!

Great vid, when will you be doing a review of radiomaster pocket?

How come a double thumbs up doesn't exist??? This was great :)

03 air unit and v2 goggles is chefs kiss, no need for rooting, what a time to be alive

@johansmitphotography

11 ай бұрын

I can't get mine to record the OSD tho? Can the goggles record with the OSD?

@4brigger

11 ай бұрын

@@johansmitphotography haven't tried yet

@gabrielfica8536

6 ай бұрын

​@@johansmitphotography I have heared you can't

cheers

First comment 🎉 , love your videos , keep it up Bardwell

13:11.... same BUG happened to me jb... when I had a ssuuperr low battery.... And my drone was off..... NEVER had the problem before.... But I power cycled a couple times... but yeah... not sure how it happened either....! But I went through that page.. choose english and then was dead in the water after..! Just DONT let your goggles run too long without plugging your drone in...?! ❤ you JB!

excellent video..... can I do this on my DJI fpv goggles V1?.... Thank you,

As a newbie... I am so lost. Not your fault. You're speaking greek to me bro! Help for the puppies ❤

@TheVeganarchism

11 ай бұрын

There’s a channel called Captain Drone which has a playlist for new omers - I found it useful as a starting point, maybe you will too. This is pretty deep stuff for a bit further down the track when you are a true addict like the rest of us 😂

@zstrauss1

11 ай бұрын

@@TheVeganarchism Thanks buddy. Just what I need! 👊

Cool

I haven’t had the freezing bug but my msp-osd on my Google’s is quiet old so maybe the bug was introduced in newer versions, fortunately even though some of my vista units are on newer versions of msp-osd everything seems to work fine. I guess it might also be that I don’t have a lot of the wtf-osd stuff enabled on the Google’s either, just auto-record and msp-osd so the Google’s are not being taxed too much. Unfortunately there doesn’t seem to be a way on the wtf website to install older versions of WTFOS to see if the freezing bug can be eliminated that way for people suffering from it.

Speedy bee use uart 4 for Bluetooth msp and the app so if using vista or 03 on a speedybee fc you will have USB and uart 1 and 4 all set to msp

Hello friends. I'm trying to figure out/understand, if this upgrade could give me the possibility to fly my mavic 3 classic with dji goggles V2 Do the Mavic 3 classic operate on the 03 system. Thanks in advance. Bwt i so happy to experience the good vibes between people who share the same interest. Peace on earth! Chris.

Great video,, so when I use the v2 Goggles that I bought separate to use with dji fpv it wants me to connect to the fly app,, but when I use them with the caddex Vista it doesn't ask that,,,, but again when I use the Goggles that came with the dji fpv it doesn't ask to connect,, why is this

So if I were to pick up a pair of V2s today... would I have to root them or would they be able to pair with the 03s already? brand new to the hobby...

for canvas width on the pastebin link i got slightly lower width, i`ll try both see what happens set osd_canvas_width = 53 set osd_canvas_height = 20

HEy, in my Betaflight there is no UART enabled. (Only the USB VPC). I tried to manualy turn UART1 on but that did not work aswell

Also, would the WTFOS on my Goggles V2 make it so I wouldn't have to change "OS" or mode or whatever it is to use my old Air Units and my RapidFire Analog? It's a pain in the rear to switch back and forth and have to rebind when I switch quads.

Hey man ! im wondering where you found the top fan shroud that has the mounting point for the VRX unit. I currently have the hdo2s & would like to make the jump to hd but i havent quite had the balls to pull the trigger on ordering a set of integra goggles & an air unit. mainly because im still semi new in this hobby & would like to just rip the shit out of my analog gear. I definently want to swap over to HD but i havent known the best route to take. Any information is appreciated. it seems that the walksnail vrx system / bundle with the avatar VTX is the best(cheapest) route to take but i dont want to buy that gear and eventually just need to swap to a dji solution & have more gear thats more or less obselete for me at that point.. Should i just pull the trigger on a goggles integra & an airunit if i have the money to do so ? & if so what antenna solution is recommended for the integra. Thanks in advance my man. More info: TBS mambo with crsf TX, hdo2 goggles, I fly 6s. I was also debating biting the bullet, ordering an integra & a BNF airunit 03 cinewhoop like the GEPRC CineLog35 V2 (as I have been wanting to build a cinewhoop for a while) & using that for cinematic purposes & have my analog gear for freestyle? im more of a freestyle oriented pilot but i feel like a cinewhoop would give me a more mobula-eqsue experience which i love that little thing it rips so well. Please help FPV-god please help

did this yesterday minus the buttering part ( I dont recall why, I did the long way round already or something).... It looked ok in the goggles when i started up 'OSD waiting' etc... but still no LQ and RSSI :( Friends say WTFOS is a bit tempramental? should I just do it again??

Howdy! I have Googles V2 that I have upgraded with DJI software for my O3 Air Units. And, I can see all the OSD stuff. BUT, it doesn't record the OSD on the goggles or the Air Unit. Would rooting my goggles allow me to record DVR in the goggles with the OSD stuff?

Hi Joshua, thanks for your video first of all.....Since I'm going crazy I ask you the following: I have Googles 2 glasses, I paired them with a Caddix vista and I can see all the OSD including the GPS data by binding the Googles 2 with the new dji 03 having done all the procedures I can see for example average battery voltage or other OSD options made available by Betaflight but of the GPS data only height then speed latitude longitude Home arrow nothing at all. I tried to see if the data wasn't overlapping on the screen but nothing at all... Do you know what it could depend on? Furthermore, despite having unlocked the glasses in FCC, the mbps do not exceed 30-31 mbps, despite the 40 Mghz glasses I have 3 channels. Thanks in advance for any help you may have.

Do the goggles v1 come with OSD display by default when used with air units/vistas? Or they need to be rooted like the v2 in order to unlock OSD? In other words both v1 and v2 need to follow the same rooting procedure via WTFOS for OSD display unlock? I was thinking that OSD was already there on goggles v1 but DJI removed it on goggles v2 though 🤔

So if I use the V2's I have for both a Caddx Vista Nebular Pro and a DJI FPV drone, I shouldn't do this ?

Exactly what i was looking for! Something I'm not sure I understood from the video is : "Can you root the goggles v2, use the O3 on one quad and still use Vistas on the other quads?"

@samlemaigre6204

4 ай бұрын

I have exactly the same question

@FRY_FPV

4 ай бұрын

@@samlemaigre6204 I switched to the goggles 2 in the end :D Sorry I can't answer you :( But I tried, and I still had to reset the goggles to switch from o3 and vista

So the betaflight OSD is recorded as OSD file along the video file in googles. Is there a way to see it in some player without googles? Thanks Joshua, enjoyoing your vids.

Do you need a specific firmware on the Vista? I read you needed to be on 0608 for this to work with the V2. Is it still valid?

ok, in the end I didn't install WTFOS. The "the goggles may reboot during flight" is a no-go for me. I can't have this happening to me when I do long range and/or risky flight I tend to go for when I travel the world

I honestly regret installing MSP OSD package (lag, display issues, garbage characters in the OSD appearing sometimes), but I can’t roll it back because I will lose Betaflight OSD menu, and since 4.4 there are dshot issues that prevent re-arming after disarm until you reboot the FC (which you can only do via OSD if you need turtle mode and it’s stuck in a tree). :(

Hi JB, i have 4.4.2 on my quad, have rooted the googles and also the AU, the OSD seems to be stuck at 4:3 even though in the OSD tab it shows wide, have confirmed canvas size also but this is still not working. This was however working a while ago, the HD fonts were showing up correctly, but after i flew a craft with the latest INAV, this stopped working and i havent been able to get it working since. I have rerooted the AU, copied over diff BF font files, but its not working. OSD is stuck at 4:3, and font files arent being read by WTFOS. Any idea what I could be missing?

Anyone had this error, Firmware too new on the V2 goggles, I cant see an older versions to restart from scratch on the butter page, just the version that's currently on the goggles 0606 and I did try that and it made no difference.. Thanks

So do the Goggles 2 and Integra support INAV OSD as well?

im using goggles v2 and runcam link wasp, is this video what i need to get custom osd on my goggles? i get my video feed good just no osd

My canvas size would update when I power the air unit while connected to BF

Is WTFOS compatible with FETtec/KISS? And if it's not, can I continue to use my Goggles with this OS with KISS like I do now? (I have an older FETtec AIO ... the 15A one.)

I get osd/ font waiting when i start the goggles up and it doesn’t show the display

i have a dji goggles v2 with Dji Air unit O3 on my drone, i receive OSD on my goggles V2 but not on the recording video DVR!! on the dvr video it recorded just the video without OSD !! i am on the latest firmware update Goggles & O3 unit (BF4.4.2 with HDOSD), can some one help please, Thx

I have the O3 Air unit and i have my V2's that i was able to Root with WTFOS and your video a while back when i got them. Theyve worked well so far for my DJI Avata. Finally got my O3 Air Unit in. Anyway, i can see my Betaflight OSD fine in the goggles while using BF V4.4. However, this being my first couple times using the O3 Air Unit finally, it seems like i cant record this BF OSD on the Goggles V2's DVR, or with the videos subtitles file being used as well, that just has time and camera setting info.. Is it possible to record what you see on the actual screen of the V2's in O3 Air Unit Mode and Flying in the Goggles screens(Video+BF OSD)? I dont see the .msp file i see mentioned on Google either, thats supposedly used to make the video with the WTFOS FPV's OSD Overlay Tool.. It would also be helpful to have a delay in turn off the recording on disarming. Like have a 2sec delay after disarm to stop the video recording.

@jaxonbmx2699

6 ай бұрын

my question too ^

@mxracingunlimitedltd7784

6 ай бұрын

@@jaxonbmx2699 Im pretty sure its actually just not possible and never was, and is a Hardware Limitation on the DVR side itself. However no one has created a program to capture the data dn overlay it back on like OSD or even like the DJI style OSD.. I dont think it would be that hard to grab the data from the goggles input for the OSD, and save it to the SD card. OR I have heard of people doing some method that involves blackbox logging for the osd information, but i dont know much about it and haven't looked into it recently.. Seems like its only possible with the V1/OG Air Unit & Vistas too im assuming then. Unfortunately, there's no way to use that Overlay tool for the OSD with the O3 system though just the V1 AU, so it doesn't seem like it will ever work on the V2's. What i read when looking into this it that the OSD chip is added to the Video signal, right before it goes out to the internal LCD Display's, but this is after the DVR unit itself so it doesn't see it or get recorded... You would need to get the Goggles 2/Integras to make it work it properly. Which really sucks because I love my V2's and i don't really want to replace them with the Goggles 2 or buy a set of Goggles 2 rn. It would be great to have both lol.. But the Goggles 2 are still too expensive for me to justify buying it, already happy with the V2's for now. I'd rather pick up a set of HDZero goggles or even the Walksnail X goggles, and get a HDZero VRX for it. Would be good for my 5" and my 1s/2s tiny drones as well. The I/O of both goggles is very nice, especially the newer WS X's.

First time DJI user just got my goggles v2s today and have gone through all the steps but i am getting a different error at the ended of the rooting it says firware too new please use butter to downgrade firmware. I hve tried both the 01.00.0606 and the latest firmware and i am getting the same error. saying its too new.

this rules.

I followed this video to the letter and i can't get any further than osd waiting... and the font load then nothing happens. anyone else having this problem? (v2 goggles and vista).

I've had the bug happen to me twice now. It didn't reboot, the screen just freezes and the OSD isn't responsive. I had to power cycle the googles. Luckily the quad was nearby and low to the ground both times. I installed GPS rescue and upgraded WTFOS. I hate to give up the HD OSD. Fingers crossed.

@skyflow_kreative_imaging

8 ай бұрын

Upgraded WTFOS? Are there different versions of it? Im on the fence about it all but I really would like to see more of the elements in my osd from betaflights. Sucks that DJI wont make it read them like it does on Goggles 2.

@HrDux

8 ай бұрын

@@skyflow_kreative_imaging I don't think the github page shows any changes made. But they have done updates to WTFOS and modules. Anyway, they devs fixed the bug and I have been using WTFOS on my Googles V2/OG AU/Vistas without problems.

Currently WTFOS is the only HD system which automatically sets the canvas size, but you need to power the system up for it to tell BF the canvas size. No need to paste the canvas size into the CLI.

@JoshuaBardwell

11 ай бұрын

I have had a little confusion with this before, where the configurator seems to not get the canvas size reliably and the OSD gets messed up. And since other vTX don't do it yet, I have just made a habit of always pasting it in.

@SteveCEvans

11 ай бұрын

@@JoshuaBardwell I’m leaning on WS to support this as they’re the only vendor to support coloured text, a part of the Betaflight HD OSD specification which will soon be popular I suspect. See kzread.info/dash/bejne/ep-G1MR8kpe8nJs.html

@DogflyFilm

8 ай бұрын

what is preset of canvas size, my canvas goes wrong after paste the jb's size

Thanks for another terrific how-to video. In my case I’m struggling. I get through to the WTFOS part where you connect the goggles. I click connect and it says looking for ADB. Could take 30 seconds. Soon after it fails and says to re-root. Goggles are set to 0606 firmware. What did I miss? I’ve tried a couple cables, USB C to USB A. Tried two different USB ports on the laptop as well. No luck.

@toys5355

11 ай бұрын

So I got the goggle to root and installed WTFOS on them. But now I can’t get the Vista to root. Followed all the steps, tried different cables, USB ports. One screen says connected checking for ADB could take 30 secs. Then it says failed detecting ADB reroot. Any ideas? My ox is a news Windows 11 one if that matters. Thanks

@jpeterjpeter

11 ай бұрын

I had to remove the sd card before i could update wtfos

the OSD did not show up on my goggles. it says "OSD WAITING...." in the corner. what did I miss?

im stuck on "waiting for any device" any help?

I get an error message at 8:17 " cannot find the specified path".

@peterdeacon4085

4 ай бұрын

Me too. Did you find a way round this to root your goggles?

I'm ready for a bulked up V3 googles same design bigger display

@DingleBerryschnapps

17 күн бұрын

Huh? 😂

I'm still kind of on a fence with this WTFOS. My good buddy had his goggles v2 going weird couple of times. Left LCD completely shut off midflight, resulting in a crash. He also reported freezing (picture still on both screens, except frozen). Does anyone know if these problems are still present with this hack?

@skyflow_kreative_imaging

8 ай бұрын

Im on the edge about it as well but I really need that full Betaflight OSD. There are elements I would like to see in the goggles that I cannot currently see.... but I dont want my stuff freezing up or messing up and quads dropping. I fly lots in areas where recovery is not possible.

i'm planning to use wtfos in the future, is it possible to still use the gogles with dji drones after uploading wtfos? I plan to use them from time to time for cinematic stuff

@JoshuaBardwell

6 ай бұрын

Yes it's possible. No problem.

I tried it many times and i only get error #1

Cant you just run the thing from C drive to remove the username from the path

One issue i noticed with the WTFOS, even with the AV-IN package installed, everytime my 3.5mm video signal gets a signal, it causes the goggles to do a quick reboot.. They go to the DJI logo for 2 secs, and then it comes back on all of a sudden and its working.. However, if the video cable or the module is not perfect it could keep loosing and getting a signal and causing me to lose video feed. Ive fixed the problem with that part of it, but still it seems to be an issue when trying to make your own simple fatshark module adapter, that works on the TV's 3.5mm input or an lcd screen, but it doesnt work in the dji goggles because of the way it seems to handle the signal, it doesnt always go into the snowflake mode eve though i have that option selected.

@mxracingunlimitedltd7784

6 ай бұрын

I unistalled and installed the update version of the AV-IN package, and with the option checked for the continuous signal/blue screen displayed or something to that effect and with a RX5808pro VRX module in a fatshark enclosure going the DJI V2's with a 3P 3.5mm cable and it was working great and the DJI has a great DVR for analog! I use a set of lightly used Fatshark HDO's i got from a friend for a great deal with a RFire module and i use that for my Analog drones.. Just wish the DVR was the same resolution as the screen. I did the fw update & dvr update too already as well. It just really kills the videos, but its watchable. The oleds also seem to make even crappy cameras look nice for some reason, the colors pop even at night, llike the grass or a red brick wall thats got some street lighting on it..

Hi, JB, thanks for the video, I followed all the steps and managed to configure my 7 inch with air unit without major difficulties, but on the 5 inch, I can't get an "HD" OSD with a DJI Kit vista lite . I use DJI Goggles V2 with WTFOS installed. The 5 inch drone with which I have "problems" is composed as follows: FC stack: Diatone Mamba F405 MK3 lite, with Betaflight 4.4.0 (I also tried 4.4.4 but it's the same) DJI unit connected on UART 3, receiver on UART 1 in SBUS (no telemetry wire) and GPS on UART 2 Everything is as PINOUT indicated by Diatone. VTX: Vista lite kit with original DJI camera and WTFOS installed with packages enabled. Also set presets for WTFOS on bataflight 4.4.0. Basically I can see the OSD with all the info I want, but I can't get the HD font version, even the OSD screen remains off-centre, it's as if the OSD remained in SD instead of HD. Custom OSD is disabled on the headset. As I mentioned, with the other drone with the DJI Air unit you can see everything in HD (much more recent FC, a ZEUS F7, again with betaflight 4.4.1), I also tried to copy the entire OSD set from the CLI from 7 inches to 5, but it doesn't change my view, it always remains in SD. Thanks for the help in advance.

@JoshuaBardwell

6 ай бұрын

Have you also installed wtfos on the air unit?

@danielevazzoler4187

6 ай бұрын

@@JoshuaBardwell thanks for replying, yes WTFOS is also installed on the air unit. If you can, I'll attach a link with photos of how everything is set up and how it looks. So maybe I can explain myself better. drive.google.com/drive/folders/1oZj9HhmwXJOBCu2ncFwt2I9KlOSRbVEj

@JoshuaBardwell

6 ай бұрын

The only thing I can think to check is that your canvas size is set correctly. WTFOS should do this automatically but in my experience sometimes it fails. set osd_canvas_width = 60 set osd_canvas_height = 22 save After that, you just need to drag things to the left and right and it shoudl work correctly.

@danielevazzoler4187

6 ай бұрын

@@JoshuaBardwell I just checked and set the CANVAS OSD as you suggested, but nothing has changed. Do you think it's possible that it's a problem with the FC not being set up for DJI? Could the OSD chip not support the Canvas' higher resolution setting? it's a DIATONE Mamba F405 MK3 Lite, I bought it in 2020 some time ago on Banggood.

@JoshuaBardwell

6 ай бұрын

No, none of that.

What I really wanted was to audience my vista v2 air unit on my Integra goggles. Can it be done?

@JoshuaBardwell

11 ай бұрын

No that combo isn't compatible.

Joshua should I root and install WTFOS on my dji V2 goggles if I only use analog system.

@JoshuaBardwell

6 ай бұрын

No there isn't much point I don't think.

I see that you rooted the Vista, would you also have to root the O3 Air Units?

@JoshuaBardwell

9 ай бұрын

The O3 cannot be rooted and doesn't need to be rooted. it supports OSD natively.

What if you are using the V2s with the O3 air unit? Any tutorial on how to deal with that?

@stevejobs5

11 ай бұрын

You don’t need wtfos for that and it doesn’t work for that either

Thanks! Great video again!!! I have some questions can you please check them i will be really thankful for your help :) I have several vistas flying. Now i am waiting for Iflight AOS 6s with 03 air unit. It will arrive in a 3 days from now I will root the googles that way. Maybe the easiest way!!!! Thank you. I wonder with my googles v2 switching for the 03 air unit am i going to loose all bind quads? Am i going to loose the fcc hacks?(i am in Europe CE) The idea is simple. I want to have rooted V2 googles with max power (fcc) working effortlessly (or as easy as possible) with all vistas and the one 03 switching in between the units Thank you. Looking for your reply

@JoshuaBardwell

9 ай бұрын

When you swtich from V2 to O3, you will lose your binds. WTFOS has a module to prevent this when going back to Vista, but there is no fix when going to O3.

I was told you can update the firmware on the V2s where you dont have to rebind every time you switch from an OG to an 03. Is this true? Sorry if I missed the video that you explained it on. Thanks in advance.

@JoshuaBardwell

6 ай бұрын

WTFOS fixes the bug going back from O3 to OG, but you still lose all your O3 binds going the other way.

@AdventureswithQuillen

6 ай бұрын

@@JoshuaBardwell gotcha, thank you for clarifying

Hi Joshua, I have the V2 goggles that I received in the fpv combo. I was forced to update after activating my stuff. I’m looking at downgrading my fpv drone to a less restrictive firmware. Will my goggles v2 then need this root ? Does the googles newest firmware demand the fpv drone to be using the latest firmware? I don’t have any vistas but I do have an o3 I’m going to put in a build. Thank you!

@JoshuaBardwell

9 ай бұрын

There is no down-side to updating the v2 goggles to the latest firmware. The only thing that matters is if you have firmware 0608 or 01.01 on the Vista.

Hi, I followed your instrucions to the letter and all seems to be working fine, thanks. Just one question I don't seem to be able to connect to DLI Assistan 2 any more, Is that normal and do I need to anyway 🤔?

@JoshuaBardwell

11 ай бұрын

Once you have wtfos installed you can't download the firmware list in Assistant. You have to uninstall it if updating with Assistant.

@alantoseland6629

11 ай бұрын

I'm not too bothered about that, as everything is working great. Now I have coloured fonts etc and more than happy with the outcome. Keep the videos coming and all the best 👍

Will this work with both the vista and a Dji fpv drone or just the caddx vista

@JoshuaBardwell

11 ай бұрын

This does not work with DJI FPV drone.

What about the OG/v1 Goggle users?

@tomgraham2604

11 ай бұрын

I run v1 goggles. This hack reboots. I get about 2 to 3 cut outs in 8 packs... I updated when they said they fixed... Same issue, cuts outs, damaged multiple batteries in crashes. Updated again.. Same issue.. Then I recently updated again to the very latest firmware... Same stuff... Got 2 cut outs in 6 packs. This hack is garbage

@TweakRacer

11 ай бұрын

@@tomgraham2604 Thank you so much for sharing your experience with the v1 goggles and the WTFOS hack. Maybe that's why Bardwell didn't talk about the v1's in the video. Sorry about all those unnecessary crashes. Was really hoping to use this hack along with FormationFlight to fly with buds. Guess it is too unstable though. Plus, I use the v1 radio controller (the black box with two long antennas), so makes me more worried that these cutouts may also cut my control link (won't be able to hit the GPS rescue switch) :(

If i have two of these goggles and convert them will they work together for audience mode?

@Widflyinghigh

5 ай бұрын

damn, was about to ask this question again.

I get the canvas.. all is working... except.. the osd is still off not as what it it showing.. as if I need to move everything furter to the left to compensate... just trying to fix the canvas mode is not doing it for me. the airunit is rooted and is from a bind and fly crocodile 7 HD and the v2 goggle from europe. any other cavas with suggestion so it works ?

@JoshuaBardwell

10 ай бұрын

Did you paste in the "canvas size" CLI lines?

@TriMeX1987

10 ай бұрын

@@JoshuaBardwell yes :) Even tried one of the lower sizes someone mentioned in the comments. Edit: Ive Rooted my airunit over again. Fcc hacks are working. Did everything else. All osd is working. Just off of where its at. So I used goggle and battery to arange em so I can see them. So it is working. Just not as it should. In betaflight configurator it looks as if all is to my left of the middle.. in real life it works.

Ciao un saluto dall'italia, sono un tuo fan, una domanda se faccio il root, perdo l'ack fcc e la massima potenza sbloccata a 1200?

@JoshuaBardwell

8 ай бұрын

No you won't.

@mauriziodifiore5680

8 ай бұрын

@@JoshuaBardwell thanks so much

Man for months I won't fly my Nazgul because of it 1/2 way working. I see the bin files loading in goggles then nothing. On a Vista. Any help? I even been in the discord. Some times it would work with no issues. I redid everything and now with nothing checked in OSD Betaflight I see weird symbols at random places.

@zoeconner11

10 ай бұрын

And do I need to use Butter for the Vista also? I rooted it fine. One of my partitions isn't working right I'm seeing others

Will this work on DJI V1 goggles?

@JoshuaBardwell

7 ай бұрын

Yes.

I still can’t get any get any elements up on the v2 with the 03air unit. I’ve tried everything. I need help

@JoshuaBardwell

10 ай бұрын

None of this relates to the v2 and o3. The v2 supports OSD natively when used with the o3. This video is what you need to do kzread.info/dash/bejne/nZ2iz9quf9HVhbA.htmlsi=EsYMGLILPYF3W6wq

@GBMark90

10 ай бұрын

@@JoshuaBardwell thank you so much that really helped

YEP NOT WORKING WHEN MY GOGGLES BOOT UP THE WINDOW DISAPPEARS :(

Does this work on V1 goggles?

@JoshuaBardwell

11 ай бұрын

Yes. But there isn't a super pack you have to do the steps individually.

Anytime I switch from O3 to Vista or Vista to O3, I have to rebind everything again. Is this fixed in a goggle firmware upgrade? I don't recall what version I'm on atm

@JoshuaBardwell

11 ай бұрын

It is not fixed. And likely never will be. WTFOS has a fix for when you go from O3 back to Vista, but there is no fix for when you go from Vista to O3.

@Joeyzoom

11 ай бұрын

@@JoshuaBardwell damn! That’s the most annoying thing about having both VTXs. I love the O3 but I’m not ready to shell out several hundred dollars to replace all my Vistas.

I rooted my goggles and my drone fell out of the sky so when back to standard

If I do the routed process,, and after the that can I still use the v2 with the O3 units

@JoshuaBardwell

11 ай бұрын

Yes.

@jamiehill9578

11 ай бұрын

@@JoshuaBardwell I'm at a road block with the Goggles,, I literally have 2 V2 Goggles one for the air unut and 1 that came with the dji fpv,, I don't wanna spend the money to get the dji Goggles,, but really to save all the headaches I might just break the piggy bank and buy them this way it will work with both drones and with the new O3 system that I'd like to get

@JoshuaBardwell

11 ай бұрын

The v2 goggles can work with DJI FPV, O3, and Vista all at the same time. You don't need to buy new goggles if you don't want to.

After doing this i cant see GPS sats number , do u have same problem anyone?

@renecelva2215

5 ай бұрын

hello, i have the same problem, how did you solve it?

Can I still use the DJI FPV drone with the rooted V2?

@JoshuaBardwell

11 ай бұрын

Yes.

You don't need to create any users. Probably just start the script from the path that doesn't have any forbidden characters and it should be fine.

@JoshuaBardwell

11 ай бұрын

No. That's incorrect. I tested that. Then I asked the wtfos dev and he said it was the user path that was the problem.

when I install wtfos on goggles v2 can I still fly dji fpv?

@JoshuaBardwell

6 ай бұрын

Yes.

I followed the complete process, and even though everything functions I get an error saying, incompatibility in device types, when i put the v2 goggles into dji 03 unit mode. should i re-butter, and re-root?

@JoshuaBardwell

11 ай бұрын

Incompatibility in device types means you're trying to bind in the wrong mode. Like you're binding a Vista and the goggles are in O3 mode.

@micsherwood4930

11 ай бұрын

@@JoshuaBardwell i may have fixed it. i re- did the root process. not seing it now.

@micsherwood4930

10 ай бұрын

nope didnt fix it.

I did all you said in the video but OSD still doesn't work. what can it be?

@JoshuaBardwell

10 ай бұрын

Wiring incorrect. Wrong UART selected. Damaged air unit.

Did all this, but now my Goggles won't show in which firmware it is on in Dji Assistance 2 (Dji FPV series). It's not loading... If I switch to O3 or FPV everything looks normal. Did I miss something?

@JoshuaBardwell

10 ай бұрын

No. You need to uninstall WTFOS if you want to flash using Assistant. After flashing, reinstall.

@Life_a_bike

10 ай бұрын

It's on 01.00.0607 if in "Air unit" protocol. If I'm not mistaking that's the firmware I need to be able to connect the V2 to the Vista. I learned that from you 🙂 Many thanks for all your efforts @@JoshuaBardwell​

11:38 you just could drop the folder with butter to the root of any drive preferably C/ (edit: don't do that it doesn't work like I thouth)

@JoshuaBardwell

11 ай бұрын

No, because it's the user home directory that matters not the program directory.

@crazy_doge3972

11 ай бұрын

@@JoshuaBardwell thank you I didn't knew that thank you and I've learned something today