DJI Phantom 4 | When and how to calibrate the IMU
Ғылым және технология
Today I'll be showing you when and how to easily calibrate the IMU of our DJI Phantom 4 (goo.gl/15gNro) and DJI Phantom 3 (goo.gl/92TKY6). The calibration is easy and can be done in a few minutes only. Leave a THUMB UP and SUBSCRIBE!
Best DJI Deals:
goo.gl/HXBl5L
Videos, Blog, Accessories and more:
goo.gl/4pfimU
Top 30+ Drone Accessories:
goo.gl/DsMNu7
Join me on Facebook:
goo.gl/sNaicj
DJI Phantom 4 Playlist:
goo.gl/aFiPgh
Compass Calibration Episode:
online very soon!
Пікірлер: 91
Thank you Tom. Great video which saved me hours of searching how to do it.
Tom I really appreciate your videos. just purchased Autel and P4 ...I have watched HUNDREDS of videos...yours are THE BEST !! FROM THE CARIBBEAN THANK YOU EMILLIO
Such an awesome and informative channel!!
Please purchase your future DJI gear via my link to support my work for free (I get a small commission)! DJI Phantom 4: goo.gl/JPGVo8 DJI Phantom 3: goo.gl/dMcCSM All other DJI products: goo.gl/EkF2Sa Thanks all together, stay tuned and fly safe!
@amitsaharan16
8 жыл бұрын
hi, i m in deep problem. my imu calibration gives external imu1 failed. automatic orientation failed. please tell what to do
@joachimseemund9524
7 жыл бұрын
Tom's Tech Time
@Lebkoungcity
7 жыл бұрын
Tom's Tech Time dggfgf
@charlesraphy1251
6 жыл бұрын
Tom's Tech Time can u please send me a DJI Phantom 4
Another helpful video, as usual. Thank You.
Great stuff Tom!
Your latest videos are very helpful and unique in the KZread. Thank you ! I got IMU error 2 times in mid-air on my P3, and it's very scaring, it drifts away, só i need to manually do a emergency return and landing on my own. The screen tilts about 30º, so do the phantom. It may be the case my IMU is needing a calibrate. Again, Thank You from Brazil!
Awesome video, your channel has helped solve many of my problems! However my Phantom 4 keeps losing signal and disconnecting from controller even when it is clearly visible, do you have any suggestions? Thanks
great tips!!!
Do you know how to fix live feed freeze up and purple and green lines? Thanks
so I purchased a dji phantom 3 standard edition. it seems to fly ok but it will NOT auto launch / auto take off. it will auto land. it seems as soon as I start the motors the thing thinks its already off the ground the the icon for auto launch changes to auto land. is there a way to fix this or have I got a lemon and simply need to return it for an exchange?
Thanks tom! What screen protector are you using on your Ipad and is it anti glare?
Can you still do a manual compass calibration by flipping the gps/atti toggle switch back and forth 5 times?
You have the best intro man
Which app did you use to check your phantom was perfectly level?
i saw a litchi app on ur dive can you make a tutorial on it ?
thumbs up, but awesome tutorial bro
Hi! did the cold IMU callibration after the new firmware update. since then the p4 have been starting to do warm-up's that last for around 2-3 min, any one else have the same problem and if so got any tip how to solve it?
I know a German who is not precise. haha. Just messing around with you. Good channel. I really like the presentation, i.e graphics. What program do you use to create them?
Can you list where you picked up that neck strap?
hello from greece!!please can you tell me what app is on your cellphone for calibrate my phantom?its on 2:25,thanks
What is that app you used for flat surface checking ?
I Have flown P3P for first time (forgot to calibrate IMU) and it flew fine. Is there any point to calibrate if nothing seems off?
I calibrated everything and my horizon is tilted. I'm noticing it was after the latest update. Any way to correct this?
Thanks Bro
hey...i have a phantom 4 ...i have a problem..my drone dont fly full forward as it should.. right, left and back works good...tried to calibrate the sticks, but didnt help...do you have some ideas..? :)
I've got error code -50 when trying to calibrate imu. Two red solid lights under drone too which indicates critical but I've never had a crash. Will be sending back soon. Anyone know any fixes before I send?
Sir Phantom 4 advanced remote control blinking red light problem
hi Tom PLEASE HELP, i know a lot of people have this same issue, i have a phantom3 4k and need to recalibrate my IMU, my controller has no usb port therefore i have no cable to connect my mobile phone to perform the calibration. i have tried many times times in various locations to perform IMU calibration through the wifi but the progress bar remain on 0% how can i calibrate IMU? thanks
hola como estas perdón no escribo en ingles sabes que cada vez que lo enciendo me pide calibrar el imu? nunca tuvo un golpe ni nada por el estilo
how do you calibrate the camera for dji phantom 3?
One advice,- instead of checking the table/platform for insurance of the leveling of the copter use glass plate on top of the motors as the copter it self has very good ability to be unleveled based on the position of the legs.
@saradoloksaribu4216
5 жыл бұрын
Thank you for your great tutorial, after that how about the gimbal is still overloaded?
Good instruction, should have included compass calibration too.
I'm a ham radio operator. I want to use my Phantom 4 to put a small line up into a tall tree then haul up a heavy line to support a 102' wire antenna. Is it possible to use the Phantom 4 to do that? I'm thinking fishing line type maybe 50 lb test line. comments?
I have a phantom 4 it connects to the controller it connects to my application but it does not connect to my camera.. in the upper left-hand corner of the app it says no signal constantly.. how do I fix this issue
My camera doen't align even IMU is calibrated. Please help. Thanks. John.
Hi Tom can you pls help me i have a phantom 2 with the Zenmuse H3-3D gimbal and dji data link.I bought it used and was told it had been in a crash .It was not a bad crash and looks good outside and inside .I have removed the gimbal and data link as to make it standard .it binds to the remote and picks up gps and the compass is calibrated .However it dose not seem to want to come down When in the air .And is very jittery almost like a car running out of fuel.And dose not want to land easily i have connected it to my pc and done a fiermware update and a IMU calibrations .it is running on the Naza -m mode . any help please Show less REPLY
can you tell what is the best result. As adviced because of loses signal by dji i do imu calibr.outside and then compas cal. this are my data of imu cal Sensors x y z Mod -0 -0 -1 1 Compas -88 -724 1210 1412 imu calibr. ok Are data ok ?/
What app you use at 2:32?
how to calibrate gmbal if camera gimbal not appear in application dji go 4?pls help!
sir calibration failed error 71 in phantom 4 (overall status abnormal)
hello sir..what if the internal IMU calibration is failed... how can i fix it.. is it ok to fly...
This video would have been helpful two days ago then me stressing out why is my gimbal moving on its own in mid flight. Also unpacking it and updating it and not doing the check could be the problem.
When calibrating my IMU on the P4 it takes a very long time and I have not been able to get passed the second step, as there 6 steps..? any ideas?
@antelopevalleywatchmen6145
6 жыл бұрын
Linaka & Gabriel's Adventures same with mine
@DeanLoveFilms
4 жыл бұрын
Mine too
I was wondering where the actual IMU for the camera gimbal on the Phantom is? I presume this is a separate IMU from the copter.
LOL @ 2:30 - "And not only because I'm German and precise". Very true
Hey Tom, what strap for remote you are using? THANKS
@TomsTechTime
8 жыл бұрын
You can find it here: www.tomstechtime.com/gadgets Stay tuned and fly safe!
@philglidden7619
7 жыл бұрын
Tom's Tech Time f
Do I do this for the Dji phantom 3 professional as well or no
@danielv301
8 жыл бұрын
Yes. And it is even more important, since the P3 have only one IMU.
not able to calibrate after it reaches 2%. Then imu error occurs. Any suggestion?
my Phantom 4 has been calibrating for over10 minutes now with no movement in status??? I did this because of the firmware update and now it seems stuck
Tom, Which neck strap do you have?
@TomsTechTime
8 жыл бұрын
You find it here: www.tomstechtime.com/gadgets Stay tuned and fly safe!
When I do an IMU calibration it has me turning the drone on its side, back, front, and top. Why is this different from what you just showed?
@user-jl4sv3nf1t
6 жыл бұрын
Tom Kelly: The first couple times I tried this it just sat there after the forth step.Then I noticed looking closely that it was waiting for me to flip on its backside. I think it was step 4 where it had stopped (4/6)doing anything. In the sunlight I was not able to see the picture clearly and that it wanted me to turn it. Look at the pictures very closely as you are calibrating. Don't worry, you can't mess anything up, cause eventually you'll get it straightened out. Once I knew this it whizzed right through the calibration. Second word of advise: Find a surface that is SOLID and cannot move. I did mine on the cement slab in my driveway, when I had tried inside my house on a table, the table moved enough to throw it off as I was turning it. Make sure the surface is perfectly level and stable. I ended up with almost zero's when I was done. Hope this helps!
do i have to do this on the spot outside where i plan to fly?
@techprojector7009
7 жыл бұрын
No...not every time...if you are facing unstable hover and frequent compass errors than calibrate the IMU on a level surface far away from EM interference
DJI Phantom 4 advance plus compas error please solved my problem
Does the same procedure apply to the Phantom 3 aswell?
@TomsTechTime
8 жыл бұрын
Basically yes. It looks a little different though, as the P3 has a single IMU only, but the procedure is the same. Stay tuned and fly safe.
@Gershy13
8 жыл бұрын
Tom's Tech Time ohh OK thanks...
my phantom 4 imu calibration error code 13. how to solve this problem
Is calibrating the IMU on a Phantom 3 similar?
@AlfexOmega
8 жыл бұрын
it's the exact same process yes
My only problem was understanding the word "sensor" as I took it as "center"... FYI us NBie's have to have a slow, even, clearly visual clue to allow us to follow you thru the steps... Or maybe it's just me...
@stephenpower1
6 жыл бұрын
No, it's not just you. I had to replay that section 5 times. I still heard 'centre' and it was only your post that clarified it for me. I also find the TTT Toms Techtime really irritating and childish.
Another great video from you. You really need to lose the sunglasses from the top of your head. ;-)
Why would it be better to calibrate the sensors when they are cold?
If it appears your IMU Calibration is stuck on 2 you need to *DO WHAT THE PHOTO ON THE LEFT SIDE OF YOUR SCREEN SHOWS.* You have to physically mimmic the picture.
This is totally different from the DJI 4 app
First Coment
Who else thinks his intro sounds like a bit of Adele's Hello?
H
wow look at all those chemtrails 2:40
please stop sending messages to my phone.
@danielv301
8 жыл бұрын
Then disable notifications from this channel or from the youtube.
"because im german and im percise" lol...
Походу время у чувака ограничено тараторит как перепуганный
I like the info, I like your videos BUT!! The hard sale crap has got to go!! I will NOT Subscribe because: 1) 50 sec into video add for your stuff pops up. 2) 1:50 add pops up for your stuff. TOO MUCH! If you want to tag an add at the end, great! But hard sell? I'm out! There are plenty of drone youtubers out there without hard sell.
Do you know how to fix live feed freeze up and purple and green lines? Thanks
This video would have been helpful two days ago then me stressing out why is my gimbal moving on its own in mid flight. Also unpacking it and updating it and not doing the check could be the problem