My brother, my brother, can I tell you you have put out the best of what I have seen videos step-by-step broke it all down I am going to use everything. I just learn

@JasonRobertsVideo

16 күн бұрын

Hi - thanks so much!! Glad it was useful to you :) :)

This was the best explanation I have found! Thank you Jason!

@JasonRobertsVideo

2 ай бұрын

Awesome, thank you! That makes me so happy to hear :) :)

Thank you very much. Regards from South Korea.

@JasonRobertsVideo

Ай бұрын

Thank you too and hi to South Korea :) :)

What a fantastically helpful video. Thanks for this and if different I look forward to the mic2 version. Cheers

@JasonRobertsVideo

6 ай бұрын

Thanks so much - glad it was helpful! :) :)

very helpful and a great length. other videos on the same topic that are like 40 minutes is too much

@JasonRobertsVideo

Ай бұрын

Glad it was helpful (and not too long!) Thanks :) :)

Thanks. Regards from Brazil.

@JasonRobertsVideo

10 ай бұрын

Thanks and hi to Brazil! :)

Wow you just got a sub! One of the best instructional videos I’ve ever seen on KZread! You sir will be successful! Much luck! 🍀

@JasonRobertsVideo

8 ай бұрын

Wow - thanks for the sub but more than that the super kind words!!! :) :) Hope you have a great day!

Thanks for the Vid Mate! I just got the Dji Mic 😊.. nice bit of gear! First time I used it my audio had some bad crackling noises.. turned out I accidently plugged into the headphone jack! 😂😂 , subbed to the channel!

@JasonRobertsVideo

Жыл бұрын

Thanks mate I appreciate that! Glad you you enjoyed the video :)

thanks dude :)

@JasonRobertsVideo

Жыл бұрын

No problem! Thanks :)

@pearllocket

8 ай бұрын

Came back to re cap 😆@@JasonRobertsVideo

@JasonRobertsVideo

7 ай бұрын

Cool! :) :)

great video, I found it super helpful, although I'm definitely worried about this cold shoe mount, ive heard before I got my Dji Mic that it was delicate but this seems crazy!

@the_driveway

Жыл бұрын

I actually just figured out that it will still charge (and fit in the case) with the mount attached. I'm using a Sony ev-z10 and will just keep things attached and charging going forward.

@JasonRobertsVideo

Жыл бұрын

Glad you worked it out :) I tend to leave the mount in the cold shoe now and just disconnect the receiver - I do it slowly and carefully so it doesn't snap back down - I find this easier than trying to slide the entire thing on/off.

@the_driveway

Жыл бұрын

@@JasonRobertsVideo interesting! On my Sony I’m using a smallrig shell that doesn’t allot the Tx to sit all the way in properly but still good enough so moving in an out is easy. Removing the mount from the tx feels like trouble for my goofy hands! Hopefully Dji makes cheap replacements…

@JasonRobertsVideo

Жыл бұрын

Haha I have goofy hands too :) I think I heard somewhere you can get replacements if you contact DJI support.

I wish I'd watched this perfect explanation of DJI Mic. Thanks Btw which EQ editing program are you using? I am always having noise problems in my KZread videos. 🙏

@JasonRobertsVideo

29 күн бұрын

Glad it was helpful! I use DaVinci Resolve EQ on every video + sometimes noise reduction/voice isolator effect. :) :)

@Fuat_Ulu

29 күн бұрын

@@JasonRobertsVideo Thanks man a lot. Wish to have a common broadcast on KZread when my Channel becomes as popular as yours. You are the King 👑of the Audio+Video.

@JasonRobertsVideo

28 күн бұрын

Wow thanks so much, that is very kind of you :) :)

Thanks for the video, very clear and detailed. 👍Well done! I just subscribed. I didn't set the mono safety and placed it too high near the collar, so the entire video's audio was ruined. I wonder where to attach it on the shirt at a perfect height and make it INVISIBLE.

@JasonRobertsVideo

8 ай бұрын

Thanks. To make fully invisible you'd have to use a lav mic, run it up under clothes and tape to torso/chest area. Can also try to put with magnet on outside and mic on inside of shirt but you would still see the magnet on the outside.

@mattandyan

8 ай бұрын

Thanks Jason. @@JasonRobertsVideo

Got a Sony ZV-E10 a few days ago as well as the Dji 1tx and when I tested it it worked on camera and sd card. But when I began recording my actual content, no sound on either. What may have happened? Is there a MUTE button that I may have hit and don’t know?

This was super helpful, thank you!! I’m planning to use both microphones simultaneously for a podcast, and I’m wondering if using stereo mode means my voice would be heard on the left ear only and my co-host's voice on the right ear if that makes sense? Wouldn’t that be a bit weird for the listeners? Thank you 🙏

@JasonRobertsVideo

4 ай бұрын

Thanks. Yes, you would need to use your video editing software to make both sides of the stereo signal go to both speakers/headphones. You also might get some "bleed" where you hear the other person in the other mic as well.

Just got the DJI mic and your video was very helpful. Two basic questions: should the transmitters and receiver be turned on when charging in the case, and do all lights on the charger case glow steady when fully charged. Thanks.

@JasonRobertsVideo

Жыл бұрын

I don't turn my receivers/transmitters on/off specifically before I put them in the charging case. The lights go out when fully charged on the case.

Very informative! Thank you! I My voice sounds muffled when the mic is clipped on my shirt. What am I doing wrong? :(

@JasonRobertsVideo

4 ай бұрын

Thanks! Do you have the fluffy wind protector attached? Are you wearing underneath clothing? Do you have the low cut enabled feature enabled? Are you wearing it upside down? All these things could cause muffled sound. You could also try EQ when editing like I show in this video: kzread.info/dash/bejne/jGxtrKN_m8zOoto.html

Hey Jason, very useful video, can i use the DJL with a webcam, example logic tech Brio? Cheers Liam

@JasonRobertsVideo

10 ай бұрын

Hi! that's a great question, I haven't tried that but it might work if whatever software you're using can select a separate mic from the webcam video

@ljscalemodels526

10 ай бұрын

@@JasonRobertsVideo thanks for getting back to me

thanks a lot for explaining 👍. i bought the "single" transmitter bundle last week and was disappointed from the mono sound. (When watching my first Osmo A4 video without microphone on TV with soundbar, i noticed a nice stereo effect from a car, driving from right to left.) So i ordered the 2 transmitter bundle for better stereo sound. Mono is boring. Do you know maybe how to create stereo effects? with kind regards

@JasonRobertsVideo

11 ай бұрын

That's a great question! The transmitters have omnidirectional microphones which means they pick up sound from all directions so if you have 2 next to each other you wont get a big dramatic stereo effect - you could experiment of course with having them face different directions. You can also create a stereo effect by keyframing/automating the pan setting in you video editing software.

Thank you for this video! Please tell me if you updated the receiver firmware? My receiver has slightly different settings menu, probably less options than you showed. So maybe the reason is that my firmware is old, but idk. Also I noticed that if you attach transmitter in the center of your t-shirt and then start rotating your head while talking and recording, then it becomes a royal PITA to correct the volume level in the post processing, because every time you turn your head left of right, the volume drops.

@JasonRobertsVideo

5 ай бұрын

You're welcome - yes it was probably a firmware update.

Hey Jason, thank u for this video! I am currently trying to livestream live gigs from a befriended singer, however the sound isn’t really the best.. I tried everything with different transmitter and receiver gains. Do you have an idea for me how I can livestream her concerts with good audio.. which settings are good? Receiver -8, Transmitter -2, idk... Thank u!

@JasonRobertsVideo

2 күн бұрын

Hi! I haven't used it for that scenario but what I suspect is that the actual physical microphones may be being overload with loud live gig music. If that's the case then the other settings wont help because the sound is too loud for the microphones. You could try putting the mics at the back of the room and see if that helps but it still may not sound the best. Sorry can't be of more help.

So helpful, thank you. Can you mount the receiver on the camera any other way, if I did not have the cold shoe option?

@JasonRobertsVideo

11 ай бұрын

Thanks so much - unfortunately no there are no mounting holes which is a shame - you could get a cage or l-bracket for your camera that has a cold shoe mount and do it that way

@watzmaaname

11 ай бұрын

Will have to get a cage then. Thank you again for your time.

@JasonRobertsVideo

11 ай бұрын

You're welcome :) Good luck with the mic :)

Would love to know what software you use to edit the recordings? I couldn't find any information online regarding it and if you think they'd be good for podcasts? Cheers.

@JasonRobertsVideo

Жыл бұрын

I've used both Premiere Pro and DaVinci Resolve to edit audio from DJI Mics - watch this vid to see how to use safety track in Resolve: kzread.info/dash/bejne/gp-Lq5iboteads4.html

Thanks for your superb videos! Is it possible to record both to the receiver and both transmitters - in stereo - for maximum safety, in case some audio source fails? How? If not, which is the best way to ensure backup tracks in stereo? I'm using this for podcast interviews, mainly me and another person in the same room. Will use it for Skype interviews later on. Cheers!

@JasonRobertsVideo

8 ай бұрын

Hi and thanks! - the receiver itself does not have any internal recording - just the transmitters. You can connect receiver to camera to also record audio into it at the same time as internal recording on transmitters.

@MattiasIndyPettersson

8 ай бұрын

@@JasonRobertsVideo Ah, I misunderstood! Thanks for letting me know.

@JasonRobertsVideo

8 ай бұрын

No worries!! :) :)

Nice review! I have a one quick question Did it ever get dropped due to clumsiness? As it is tiny in size, so was concerned if it would withstand 3-4 feet of accidental drop.

@JasonRobertsVideo

11 ай бұрын

Hi, never dropped it (yet) but it is not described as "shock proof".

@mechanizer007

11 ай бұрын

@@JasonRobertsVideo Thanks. How tough you find removing the adapters from the receiver? Sometimes, I feel I am putting too much force on the receiver when holding it to remove the adapter. Was it normal for you also during the initial days?

@JasonRobertsVideo

11 ай бұрын

Yeah they can be a bit stiff and I think if DJI make a v2 they should make a stronger feeling adapter. I haven't broken one (yet) though, I just make sure I go slow and careful! :)

Hi. I have a question that I'm hopeful you can address. Two years back, I acquired a DJI Pocket 2 camera as part of the creators bundle, which included a wireless microphone. Now, I'm keen on utilizing that very same wireless mic with my Sony A7SIII camera in specific scenarios. Could you please guide me on how to connect it to my Sony camera? I'm wondering if DJI produces any separate receivers that are compatible with these mics, or if there are any generic alternatives available. Your assistance would be greatly appreciated.

@JasonRobertsVideo

Жыл бұрын

Hi, I've never used a Pocket so I don't really know much about it sorry :(

What do you mean when you say “if your signal in your camera is very quiet?” This is when you are talking about the receiver gain. What is a good number to have on the receiver gain?

@JasonRobertsVideo

10 ай бұрын

I think I meant if even with a high receiver gain your camera input is still too low then increase your camera gain. There is no one right setting for receiver gain as it also depends on what your transmitters are set to and how loud the person is - I think I have mine at +6 on a Sony a7S III

I just purchased one today and I didn’t have a magnet. Am I missing something? I didn’t get the combo kit just the individual.

@JasonRobertsVideo

Жыл бұрын

Not sure about the individual ones but I would have thought they should come with magnets - I would reach out to DJI or who you bought it from and ask. Hope you get it sorted as I use the magnet all the time for attached to t-shirts.

Probably asked often but what are the best ideal receiver gain and transmitter settings?

@JasonRobertsVideo

9 ай бұрын

There's no one ideal setting, it depends on how loud the person talks, how far the mic is from the mouth, whether or not you are using a separate lav mic, what camera & settings you are attaching to: I think I'm currently +4 on transmitter and +6 on receiver.

@damononthehill

6 ай бұрын

are you setting your camera recording audio levels to 1 or 0? or like 5? my a7iv goes from 0-31, you said as low as possible, but I'm looking for a specific range. thanks! Love the video! @@JasonRobertsVideo

@JasonRobertsVideo

6 ай бұрын

Hi and thanks for the thanks, I don't have an a7iv so can't give you a specific number sorry.

Does the audio still sound good outdoors?

@JasonRobertsVideo

4 ай бұрын

Yep - I've made loads of vids outdoors with it :) :) Just fit the wind fluffy if it's windy and maybe if it's super windy wear it on the inside of a tshirt

do u use this in weddings?

@JasonRobertsVideo

6 ай бұрын

I don't record weddings but you could use it depending on what you wanted to do

Hollyland lark max DJi mic ou Rode pro com 32 bit?

@JasonRobertsVideo

10 ай бұрын

Hi - DJI mic is not 32 float (hope I read your question properly!!)

@CSEVENTOS

10 ай бұрын

@@JasonRobertsVideo Lark Max Hollyland or Rode Pro? Rode Pro has 32 bit float.

@JasonRobertsVideo

10 ай бұрын

Hoping to get some units to test as I have not tried those - but 32-bit float would be great to have sometimes! :)

time stamps pleaase

@JasonRobertsVideo

11 ай бұрын

Hi! So sorry I thought I'd put them in!!! I'll get right on that!! :)

@gamewavelondon

11 ай бұрын

@@JasonRobertsVideo btw can you pug the receiver into a Bluetooth speaker aux and hear the mic input?

@JasonRobertsVideo

11 ай бұрын

In theory yes as long as the speaker has a mic level input socket