Thank you so much for this great video! This will help so much. I did not know about the safety tracks. Recorded my 1st video at 0db transmitter and 0db on receiver and definitely had to fix it in post which took way longer.

@JasonRobertsVideo

11 ай бұрын

Thanks Neil! - hope you're future recordings go better :)

@Neilthegarageguy

11 ай бұрын

@@JasonRobertsVideo thank you!

@JasonRobertsVideo

11 ай бұрын

You're welcome :)

Fantastic checklist. This is the mic I use (and love), and I’m certainly guilty of making some mistakes when in a rush. Thank you!

@JasonRobertsVideo

11 ай бұрын

You're welcome - glad to help! :)

FANTASTIC! Liked and Followed! Well done.

@JasonRobertsVideo

10 ай бұрын

Thanks so much! - glad you liked the vid :)

Thank you for the video! I made most of these mistakes during my first test ride using the DJI mic.

@JasonRobertsVideo

8 ай бұрын

You're welcome :)

Hi! Does the receiver gain affect on the resulting audio for the iphone connection?

I revisit this video every time I do a shoot. Thanks again!

@JasonRobertsVideo

11 ай бұрын

You're welcome!! - thanks :)

Any settings for capturing the effects with 1 transmiter ???

Thanks for these great tips.

@JasonRobertsVideo

11 ай бұрын

You're so welcome - thanks :)

Great Video!

@JasonRobertsVideo

11 ай бұрын

Thankyou :)

Great help. Thanks.

@JasonRobertsVideo

8 күн бұрын

You're welcome! :) :)

Brilliant, thanks very much!

@JasonRobertsVideo

2 ай бұрын

No problem Benjamin! Glad to help :) :)

What is the best way to use the dji mic only as a "recorder" device ? I am mostly too far away from the camera so i want to use the back up recording only. When i do so do i have to set the reciver in to the camera an check my gain levels etc. or has this no impact to the backup recording of the transmitter? So could i leave my reciever at home ? :D, or should i go for a different external recorder? I hope you understand what i mean :D

If I was using 2 transmitters 1 to record the sound of an engine and 1 for the exhaust would I put them as Mono tracks? thanks

@JasonRobertsVideo

8 ай бұрын

You would need to choose stereo if you wanted to edit them separately.

@em1860

2 ай бұрын

But if you do choose stereo, then you'll want to be sure to convert it to mono in post.

@JasonRobertsVideo

2 ай бұрын

Correct :) :)

I am getting some sort of interference using LED lights and possibly camera Wi-Fi. It just happened recently and I have a lot of devices in the chain. I connect my tascam X8 to the DJI receiver and I connect a wired road microphone to the transmitter. I did update the DJI Mike yesterday but every video I recorded in the past 2 weeks has been robotic and horrible sounding

Very informative video thanks so much, I have one question, if you can indulge my ignorance. How do you reduce clipping if you are not using the receiver and the Mic 2 is blue toothed to the DJI action 4?

@JasonRobertsVideo

3 ай бұрын

This tutorial is for DJI Mic not DJI Mic 2 and I don't have an action 4 to test on I'm afraid. You could always use 32-bit float backup internal recording on DJI Mic 2 transmitter to help prevent clipping.

Thank you so much for the All-in-one tips video. I wish to buy DJI Mic. But I found a lot of content saying DJI Mic has audio sync issues. Have found any issues with DJI Mic?

@JasonRobertsVideo

10 ай бұрын

My pleasure! I have heard people say that too but I've never experienced it, I mostly use the audio from the receiver and not the internal recording unless there was a need to do so. I also heard that a firmware update had fixed a sync problem but I can't confirm if that was the case, sorry. I estimate I've made about 50 vids now using the DJI mic and I've never had a sync problem.

What are some good db numbers to always have the transmitter and receiver on?

@JasonRobertsVideo

10 ай бұрын

There is no one "right" setting it depends on a number of things like how loud people are talking etc. I have my receiver gain at +6 on a Sony a7S III

Thanks for the tips. What transmitter and receiver gain you usually keep?

@JasonRobertsVideo

9 ай бұрын

No problem, I thinks is about +4 transmitter and +6 receiver with safety channel active

@gagansuie

8 ай бұрын

@@JasonRobertsVideo what is safety channel active? is that a setting in the receiver?

@JasonRobertsVideo

8 ай бұрын

It's a receiver setting - check out my user guide for in-depth details: kzread.info/dash/bejne/ZmeXq7Nxia6-aNY.html

Thanks bro. I have tried to do all the above but I still get some level of white noise on my sound whether the gain is high or low.How can I eliminate the white noise on my audio?I have been recoding in a very quiet room but I still get the white noise

@JasonRobertsVideo

7 күн бұрын

Are getting the white noise with just the transmitter internal recording?

Hi, i use the dji mic only to capture my exhaust sound, i got a really loud exhaust so i already tried to put the receiver gain and transmitter gain on -12, but i still get very bad audio with microphone volume on +12, will putting the mic volume on -12 solve this problem? looking forward to your feedback, would really apreciate it thanks!! love the vid!!

@JasonRobertsVideo

4 ай бұрын

Even with -12 if a sound is way too loud it might overload the microphone built into the transmitter so -12 won't help if that is happening. Try moving the mic further away from the exhaust and also -12

How should i use the two transmitters if i am doing ASMR for massage, one mic on each arm - Should they be in stereo?

@JasonRobertsVideo

9 ай бұрын

WOW! that is a question I never thought I'd get!!! haha Good question though. Stereo mode will give you the ability to mix each "arm's audio" separately when you edit your video if that's what you want. I would do some tests before recording your first real ASMR massage recording.

I want to pass audio in my dji mic to Steinberg audio interface. I use rode vxlr adapter to connect the trs output in the wireless mic and the xlr input in the audio interface. I use the interface to create a better audio using Pro Tool. But when I tried this method there is a little noise in the output. I tried the all the way to fix it. But I can't. Is this Rode vxlr adapter compatible with DJI wireless mic?

@JasonRobertsVideo

7 ай бұрын

Haven't used vxlr so don't know - I also did this video on DJI Mic noise kzread.info/dash/bejne/Yp-Yw7ywZ67Ocdo.html

why is my audio full or random high pitch crackling sounds? its plugged into my Digital SRL. i was in a static car and had the mic a few -db on the gain settings

@JasonRobertsVideo

6 ай бұрын

Don't know - do you get the same noise if you use the internal recording on a transmitter? If not then it might be RF interference or possibly a fault audio cable from the receiver to the camera. If the internal audio files are also crackling then you may want to contact DJI support.

WHY DOES the Stereo only record , and Outputs in one Speaker While the MONO setting plays output in 2 Speakers ??

@JasonRobertsVideo

6 ай бұрын

Stereo outputs to 2 speakers if you are recording on 2 transmitters - if you are using one transmitter then you will only get it on one speaker.

Hi there. I just got the DJI mic and love it, I did a quick test using stereo to record an audio podcast but I can hear a distant voice in the other persons mic and vice versa, am I doing something really stupid? lol

@JasonRobertsVideo

16 күн бұрын

If they were sitting near each other then each mic is probably picking up a bit of the other person talking

@DudeOnADualMotor

16 күн бұрын

@@JasonRobertsVideo hmm ok, maybe I need to play around with the gain, I mean both were probably 6-8ft away from each other, a rough distance of two people sitting at a table together, I thought it would be enough distance, sorry for being that guy man lol

@JasonRobertsVideo

15 күн бұрын

No worries! - we're all on a learning journey that never ends : :)

I got the 1x tx 1x rx bundle but cant buy a single tx to make it stereo...fml

@jasonrobertsvideo thank you! Wondering if you can help with this issue I’m having, everything is fine and showing up as working when I record, but when I take the receiver out of my phone, the video hasn’t picked up audio from the actual mic, only from the phone - do you know how to fix this please?

@tree3111

7 ай бұрын

maybe you can ask dji support for help

@deathzone5893

7 ай бұрын

I have that problem too but it only happens to me sometimes most of the time the camera picks up the audio but other times it dosen't. I always have the audio to be saved into the mic it self but it takes so much time to drag the audio from the mic and replace the audio while editing the video it's so frustrating when that happens.

Jason I have been watching some of your videos relating to DJI mics. I know you have a deep knowledge on this, but I also know you are not a DJI technician. I have had one for a year it went back for a receiver issue then return after 5 weeks. ThT aside I have a particular issue with the unit now and after 6 weeks of messages long winded delays with DJI I still cannot get this resolved. I wonder if and fully understand if not, would it be possible for you and I to have a tele phone call or better still a messenger or WhatsApp video call and see if I have set something wrong or if DJI need to stop the flimflam and take the unit back in. Something they seem reluctant to do at this time. Kindest best wishes Paul Paul apps

@JasonRobertsVideo

11 ай бұрын

Hi Paul sorry to hear you're having problems - for additional help you can also try the DJI forum here: forum.dji.com/forum.php?mod=forumdisplay&fid=129&filter=typeid&typeid=773

What mode should we be using while recording with two transmitters? Like in a two-people podcast setting.

@JasonRobertsVideo

10 ай бұрын

In that instance probable stereo so you can mix each persons levels in post

@Bill_Sonya

10 ай бұрын

@@JasonRobertsVideo thank you!

@JasonRobertsVideo

10 ай бұрын

No problem :)

Important Video, i wish i watched this earlier....

@JasonRobertsVideo

5 ай бұрын

Thanks - glad you found it :) :)

@marcmccomas

7 күн бұрын

Same. I recorded three lengthy videos via my iPhone with my DJI mics and was shocked at how muffled my mic was the entire time 🫣

Oh yeeeah, I had that mistake with gain at the concert😢

@JasonRobertsVideo

7 ай бұрын

Sorry to hear that :(

My man has a hand game better than Slick Willy.

@JasonRobertsVideo

11 ай бұрын

Haha, I have no idea what that means but thanks for the comment!! :)

Nobody is telling perfect arrangement of this mic😂

@JasonRobertsVideo

4 ай бұрын

Not sure what you mean but thanks :) :)

@kfbsyedanwarsclasses2323

4 ай бұрын

@@JasonRobertsVideo Receiver setting Transmitter setting At what db

@JasonRobertsVideo

4 ай бұрын

That's because there isn't one setting that is right for everyone - check this video to learn more: kzread.info/dash/bejne/mJl5utuQmMy2fKw.html