Hi my loves!! 💕💕💕 soooo many more wedding diys to create! Make sure you leave your thoughts down below about the table signs & programs!! 👇🏾

@ritathmpson4185

2 жыл бұрын

Hi🤗KAYLA I NEVER HAD A WEDDING, BUT MY OPINION IS YOU GOT THIS❗YOU, AND MARKUS ARE DOING A GREAT JOB❗👍🏽🙏🏽💞👰🏼🤵🏼

@YoungLadyBusiness

2 жыл бұрын

@@ritathmpson4185 thank you boo! 💪🏾

@Theeluvlli1

2 жыл бұрын

What a beautiful wedding to come! It will be memorable. 💕

@roshelleroberts2996

2 жыл бұрын

@@YoungLadyBusiness kayla where is my invitation? Didn't see mine in the mailbox 😔

@roshelleroberts2996

2 жыл бұрын

Congratulations on a new beginning

I like Marcus's idea of just rounding the top edges. It's a nice compromise & still looks super cute without spending more $ and making extra work for you.

@YoungLadyBusiness

2 жыл бұрын

Thanks hun!! We haven’t totally decided yet but I agree this would be a good option!! ❤️

Not sure if you would like this idea. I would punch two holes in the top of the table number card (get them back to back so visible from both sides) and attach to the stand with the leftover fabric from the invites. I think that would bring the number slightly lower and create some visual interest! Love everything you have done so far!!!!!!

@demaraann9626

2 жыл бұрын

Yes! I was thinking this too! I felt like it needed something added. Love the hole punching idea

@nikkiwright9940

2 жыл бұрын

Great idea!

@Listen2me400

2 жыл бұрын

Was thinking the same.

@charlottenakedi861

2 жыл бұрын

Love the idea

@Danajanene

2 жыл бұрын

Like this as well. I can see this swaying in the wind and it stays on. Where as the other might come off in a strong wind.

For your table signs I would punch 2 holes and add metal rings to slide onto the stand. If the color is off maybe you can spray them the color that you want. As for the fans go get the smaller tool and round the edges. Although all your options would look nice, to me every detail matters. I DIYed my wedding and it was very tedious but in the end I'm flattered how everything turned out! Best wishes Kayla!🙏🥰

Thank you for letting us in your wedding planning

@YoungLadyBusiness

2 жыл бұрын

Of course hun! 🥰

Baby girl , I am soooo “ super-duper “ excited for this wedding to take place!! 😁👏👏👏👏

@YoungLadyBusiness

2 жыл бұрын

Lol!! Yasss! I’m super duper excited too girl!! 💖💖💖

@lifeisbutadream3598

2 жыл бұрын

I love all the ideas!

1. Round all the corners and get a smaller rounder 2. Try to make a template that's a little longer for the table stand and use a off white, cream, or tea stained paper so the look is not so harsh and still print them. 😉

For the fan round out all 4.... for the number table punch 2 hole at the top with a punch holder and put ribbon on there to tie on.. Make sure the card stock is cut not showing the white on the edges. You can use a paper cutter... it would be much nicer than you doing it with scissors.

Your uploads bring me soo much joy and happiness. Thank you for bringing us into the wedding planning as the plus one

@YoungLadyBusiness

2 жыл бұрын

Yaaay! So happy you’re here boo!

I don't usually comment however I wanted to say, congratulations Kayla and Marcus on your wedding! I hope it's everything you guys ever dreamed of ❤❤❤

Sparklers are great 👍 don't forget to have a safe place to put the hot/used sparklers afterwards, I was at a wedding and the hot sparklers ignited the brides veil ❤️‍🔥

Hi! All of the deco were cute but I feel like a cutting machine would've helped you a lot with most if not all of the projects. The table numbers would look so cute with a burlap fabric like others suggested with maybe iron-on/htv or reg vinyl would look cute. Can't wait to see how everything turns out 💕

@YoungLadyBusiness

2 жыл бұрын

Thanks boo!! 💕 I have a cricut, I really need to dive deep into its capabilities. I’ve only ever made vinyl labels using it.

I actually love the square edges of the program fans. It looks really crisp.

@YoungLadyBusiness

2 жыл бұрын

It’s really not bad at all! 💕 I like it too!

This is a moot point but I would used the cricut print then cut feature for making the curved fans, the seed packets and the table stands. I would go with rounding just the tops of the fans leaving the bottoms square. You get the clean pro look without the headache. Though I really like the look of all corners rounded. Doing just the top gives a very similar vibe. And someone suggested putting the cardstock on a piece of burlap (very affordable fabric) for the table stand. But for the DIY but beautifully executed look I would definitely be putting my cricut to more use! Congratulations!

@YoungLadyBusiness

2 жыл бұрын

Thanks hun! 💕 I need to up my cricut game. 💪🏾

I Love Everything That You And Marcus Are Doing For Your Wedding 💕💕💕💕

@YoungLadyBusiness

2 жыл бұрын

Thank you boo! 💕

I would fold burlap around the stands (cut pointed ends) and attach the card stock table numbers to each side.

K loved the uniqueness of the invites 🔥Those fans are great just the way they are 💯Love the favorites in the wagon👏🏽You are almost there🙏🏽

@YoungLadyBusiness

2 жыл бұрын

Thank you hun 💕

YAY! New video!!! Side note girl…I love your wedding bands but I do have teenie suggestion since you guys are very DIY and doing tons of projects there’s this website I bought my husbands “work wedding ring” at…it’s called enso rings and they’re all silicone wedding bands …my husband loves Star Wars so I got him one from that collection…& they also have ladies bands…just a suggestion so you don’t tarnish your beautiful rings 🥰

@YoungLadyBusiness

2 жыл бұрын

Oooo!! That’s good to know bc we be working hard & would hate to mess these up!!

@Nina.Y

2 жыл бұрын

@@YoungLadyBusiness omg yes girl! Don’t ruin your rings! Gotta keep them shiny & cute ☺️

@alisalaska1786

2 жыл бұрын

For real. My husband is a computer engineer and his ring gets dinged up SO fast, still. Soft metals are the best to get, but they do damage easily. That is one plus of getting your ring locally is that they will polish it and such whenever you need without a cost.

@mermaiddiyartist8119

2 жыл бұрын

😂 Star Wars. That’s cute. Need to get these

@Nina.Y

2 жыл бұрын

@@mermaiddiyartist8119 😂 yes my husband is a man child lmao jk but they have other types of rings that was just one he can wear everyday to work without ruining the expensive one ☺️ you should check them out!

I totally commend you and Marcus for putting so much Love and Effort into Everything that you do. Your entire story is like watching a Hallmark Romantic Movie and every time that you vlog, we get to sit in the front roll VIP section. Your wedding is an Absolute Labor of LOVE that you two will cherish forever!

Use your extra envelopes from your seeds and fold the closure over the bar..That would use something you already have 🧡🧡🧡🧡

Kayla I enjoyed watching you do your wedding DIYs and everything turned out great.

We have our weddings on the same weekend! Congratulations girl 🥰💍

@suzanneweary9739

2 жыл бұрын

Congratulations!

@YoungLadyBusiness

2 жыл бұрын

Okay! Congrats hun 💕

For the table numbers, I think you could grommet them and put a couple rings in those 2 holes and slide the rings on the rod

What a wonderful vlog. So much to do. So nice of you to share. Thanks for taking us along.

I actually think your table markers are very cute. Simple , clean , perfect!!

@YoungLadyBusiness

2 жыл бұрын

Thanks hun! 💕

You are so sweet to take the time to show your planning I’m really excited to see it all together

I would have done all the cutting with my cricut using the print then cut feature. It's honestly so easy! These are the perfect little projects that make having a cricut so useful!

@YoungLadyBusiness

2 жыл бұрын

I need to do a KZread search on how to do it all bc honestly I have a cricut but never use it.

@lelaglover1791

2 жыл бұрын

@@YoungLadyBusiness I love my cricut!! All the projects you did today could be done on one!!….and it would have been streamlined too, like instead of you doing the envelopes for the seeds in the printer 1 by 1 you could have had the cricut draw your message on as many that could fit on a mat at time. I love this type of stuff 😂😂😂😂

I love the DIY Project ♥ Your Wedding is Definitely going to be absolutely beautiful

Hi Kayla and Marcus, I love your wedding bands. Thank you for bringing us along, as you plan your special day. You are so creative, Kayla. Make sure that you are also getting plenty of rest too.

Kayla EVERYTHING looks great. I wouldn't round the programs and just use them as they came out. They look perfect. Cricut needs to sponsor you as you could definitely use their machine for your DIY's. I can't wait to see it all come together.!!!!

@YoungLadyBusiness

2 жыл бұрын

I have a cricut. Two actually!! Maybe I should actually learn how to use it. I’ve only ever made vinyl labels using it 🫠

Hi sweetie, I love ALL your ideas! I think you and Marcus are awesome separately and such a beautiful couple! I can't wait to see everything come together. My vote for your fans is all rounded edges. Blessings and a lifetime of happiness together!😍

@YoungLadyBusiness

2 жыл бұрын

Thank you boo! 💕

Awesome rings for two awesome people 😘😘😘

@YoungLadyBusiness

2 жыл бұрын

We love them 😩

Round the top and add a ribbon to the stick and the table number at hobby lobby would be perfect 🥰

I like the round tops with square bottom for the fans. For the table numbers, I actually think the small ones at hobby lobby were better, won't take away from the decor. LOVE the seed packet idea, don't mind if I steal that for when I hopefully someday get married. 💗💗💗

I’m so glad your sharing these beautiful moment’s with us

🌟🌟For the sparklers you might what to designate a specific section far enough away from the tent or your exit path, you can decide. I would definitely have designated guys to light them and run away from them. They are huge and you don't want any accidents. I would definitely not give them to guests to light. Just a thought to be cautious with that. So excited😀🌟🌟

@patpeters6331

2 жыл бұрын

Excellent suggestions! Safety first!

Thank you for letting us see your wedding is going to be so pretty

You are doing a great job. Can't wait for the wedding!!! Thanks for sharing.

Live them the top bottom like this with the square ages. Its nice too.

Hi Kayla, so many great ideas. The wedding planning is going great, thanks for sharing. The grandma in me says "be careful with those sparklers"! Can't wait for the big day😍🥂

Love everything that you're doing I enjoy this video a lot please keep up the good work. Stay blessed both of you

All the DIYs look so good. Can't wait to see how everything comes out. I think the rounded top corners look fine

I love the idea of taping the envelope to the paper for the printer!! I love all of your decor! It is going to be a beautiful wedding!!

Kayla time is drawing near...so happy for you and future hubby 💞

@YoungLadyBusiness

2 жыл бұрын

Soooo happy toooo 🥰💕💖 thank you boo!

I can hear ALL the excitement in your voice! The day will be perfect. Enjoy EVERY SINGLE moment (even the ones that weren't plan).

You are doing a fantastic job with everything. So excited for what’s to come.

@YoungLadyBusiness

2 жыл бұрын

Thank you 💕

So awesome and cute how much y’all are DIYing!! Adds an intimate and personal touch

I really like all of your wedding DIYS and for the wedding program/fans I like option #2 congratulations

🥰❤️❤️❤️❤️❤️ I can’t wait the wedding is going to be beautiful 😍

You're rings are BEAUTIFUL 😍!! I'm so happy for you and Marcus ❤️!!

I love just the top rounded. It looks super timeless and elegant.

How exciting!! I love your style, it’s going to be so magical 😚 I would say attaching tags to each sparkler is overkill 🤪 just one big cute one on the container you put them in. I love the seeds idea! Also, random, but I planned a date with my hubby on the same day of your wedding! 😝 y’all enjoy yourselves😋🥰

@YoungLadyBusiness

2 жыл бұрын

Right!! I’m thinking the same thing 💕 awwww! That’s sooo cute ! 🥰🥰🥰

Watching this video, all I could do was smile--from beginning to end. Wishing you two the very best of everything that's good.

@YoungLadyBusiness

2 жыл бұрын

😊😊😊 awww, now I’m smiling! Thank you for such sweet words!

You are doing so good doing the things yourself saving alot of money and to me yours look so much better. Thanks for sharing your ideas with us. So happy for the both of you.

Option 3 and fabric for the table numbers. The stand is really nice, but you can go for the smaller stand too.

Everything looks beautiful 💐 Thanks for sharing 💕

Love all the diy projects, your wedding going to be beautiful 💐🥂

@YoungLadyBusiness

2 жыл бұрын

Thank you hun 💕

Broke my finger trying to get here 😆 🤣

@YoungLadyBusiness

2 жыл бұрын

Yay!! Thank you for being here my love!

Kayla your DIY looks FABULOUS 👌 YOU are so talented. Great video today and thanks for sharing .

yess option one is exactly what i was thinking ! no reason to make it harder and looks just as cute ! i love all your wedding ideas !

Everything looks so beautiful, and you are good at crafting, your wedding is going to be beautiful and professionally done ✔❤

@YoungLadyBusiness

2 жыл бұрын

Thank you hun! So sweet 💕

Round the edges get a smaller paper rounder

@YoungLadyBusiness

2 жыл бұрын

Thanks hun! 🥰

Omg all of these ideas are so cute and creative ! You make me want to get married all over again. Congrats ! 💕

Thank you for taking us shopping with you. Love your rings. I will continue to watch the rest of this later. Take care. 💒

@YoungLadyBusiness

2 жыл бұрын

Thank you boo! 🥰

@Jennie-wm3qj

2 жыл бұрын

@@YoungLadyBusiness awwww so cute!!! 🙂

I really love how the program cards turned out! The rounded edges are so cute💗

Wow you have got a lot to do.loved the invitations.🥰👍

Everything is so beautiful. I’m always truly amazed at you two. My husband and I are not a DIY people at all but you always give ideas and inspiration. I say the rounded edges for the fans.

Thank you for bringing us along with you on y’all journey.

I pray that you record your whole wedding ceremony ❤️❤️ I know it gonna be absolutely stunning

For the table markers, you should use fabric and stitch it together. You can use a dowel slightly larger than the table marker stand and fold the fabric over that and sew the seam. Then you can cut it to the shape you desire and do iron on designs

Kayla I'm so excited for your wedding just looking at you doing your own invitations. You did a great job. Yes I think getting a hold puncher for the numbers table is a good idea. Can't wait.👰👰👰

Hello Kayla, you are doing a good job with the wedding things but the fans should be rounded bottom and top looks undo with just the top done and the sparkles don't need any signs just put them in a bucket and let them know what to do because what ever sign you put on them will only just burn up don't give yourself extra work to do.

Option #3 for program fan. Replace table number stands with smaller number holders.

@YoungLadyBusiness

2 жыл бұрын

Thank you hun! That’s honestly exactly what I was thinking !!!

Your doing amazing for your wedding 🌸 love all your ideas

I am happy for you and Marcus love you both! Marcus I am excited you allow us to be part of the wedding planning. You are so authentic, natural , down to earth. You are a beautiful couple. Blessings, blessings blessings! Can't wait for the wedding!

i agree with Marcus regarding the fan... i think the table numbers look good but do what makes you happy.

You're so much fun and creative!! So glad that I subscribed to your channel Congrats to you both!!🎉🎉

As a DIY budget bride, seeing you do all of these at home gives me hope! They all look amazing and are giving me so much inspiration for my wedding 😊 I hope marriage is treating you & Marcus well ❤️

Kayla and Marcus I am so proud of the work you guys have done to make your house into the home both of you ❤. You guys have taken Wedding Decor to a whole other level. While I know you guys have spent a boat load of money 💰, I know you saved a ton by doing so many things yourselves. God's continued Blessings 🙏 ❤❤.

Hey love you all .what a beautiful young couple putting so much love into your first home what memories you will have to share with your children when you decide to become parents. Marcus has some serious skills both of you do.

Kayla your doing a good job making your wedding invitations.

So cool watching everything come together

Is am sooooo excited for you guys. You guys are so gorgeous together.

I think the rounded edges are sooo much better! Great job planning your own wedding! I know it’s stressful but your doing so great Kayla!!!🥰😉

It's the cake cutting practice for me!!! That was funny 😁

for the fans, with a pencil, lightly trace the rounded corners using a template made from a blank or discarded cardstock then hand cut the bottom corners.

I think lanterns on the reception tables would be so romantic!

Definitely option 3, looks the most professionally done if that is what you are going for!!

Hello Kayla🤗 I really enjoyed watching you shopping and you are so talented. I love option 1 for the program fan. What a great idea. I can't wait to see the wedding. 💕🌸

The rings are beautiful I love how y'all pick that out it looks nice on your finger you go girl

Can't wait to see how it turns out!!!

I am speechless! This video left me in awe, just like you and Marcus’s engagement video. Thank you for sharing all this with your subscribers. Marcus and Kayla…everything is beautiful, so loving, just perfect! I don’t know y’all personally, but I almost feel like jetting from Southern California to Georgia to be at this SPECTACULAR❤️MONUMENTAL❤️GORGEOUS event!!🤵🏽‍♂️💍👰🏽‍♀️

You guys did an awesome job!❤️

I like the idea of rounding all corners. A smaller paper rounder!

I got married last year so I really enjoy the wedding videos. I wish I documented all of this!

I would choose Marcus's idea. The top rounded looks great. You are very talented in crafting. I couldn't do it all. Great job! And have a lot of fun in planning your wedding further!

Hi Kyla, I love everything you and Marcus are doing for your wedding. Everything look so beautiful and I wish ya'll the best. Always keep God first

Everything is coming together so beautifully Kayla. I’m so excited for you & Marcus. All the best s always. 🤍

I'm so excited for you! The table numbers look good. I would leave the fans square. Thanks for sharing ☺️

@YoungLadyBusiness

2 жыл бұрын

Thanks boo! 💕✨

My Kayla. Number 2 is just fine. Don't sweat the small details. Have fun and enjoy!!!!!