DIY Volkswagen Passat CC Audi Skoda Seat VAG Strut Mount Bearing Replacement

Автокөліктер мен көлік құралдары

Hello guys! In this episode we will replace the strut mount and the strut mount’s bearing on a Volkswagen Passat CC. Obviously it is dangerous to drive in a car with defective strut mount bearings. In addition to the safety aspect, there is an economic incentive to replace defective strut mount bearings. Over time, they will cause consequential damage to other parts of the suspension ,- and thus additional and unnecessary repair costs for the car owner.
Disclaimer: The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle. Wannabe Mechanic and any sponsors of this video assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Wannabe Mechanic recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Wannabe Mechanic, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Wannabe Mechanic.

Пікірлер: 27

  • @TheDIYWorkshop2020
    @TheDIYWorkshop20204 жыл бұрын

    I would like to thank all our viewers out there for supporting our youtube channel. Welcome Malaysia to the Wannabe Mechanic family!Many more videos coming up every week ,so stay tuned!

  • @luismaya7073
    @luismaya7073 Жыл бұрын

    Very good job, I appreciate that you actually took the time to tell us the specs, what to torque everything. Thanks

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    Жыл бұрын

    thank you for watching and for your comment Luis !Take care!

  • @martinszama382
    @martinszama3823 жыл бұрын

    Thank you !! I like you using budget tools Parkside like most Diy mechanics in my country:)

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    3 жыл бұрын

    Thank you for your comment! Where are you from?

  • @martinszama382

    @martinszama382

    3 жыл бұрын

    @@TheDIYWorkshop2020 Poland but living in UK Ireland.

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    3 жыл бұрын

    A lot of fans in Poland✌

  • @sopapanturu2778
    @sopapanturu27784 жыл бұрын

    Very good.

  • @paulc3735
    @paulc37356 ай бұрын

    pretty straight forward.

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    5 ай бұрын

    Thank you for the comment!

  • @MadLin-hj4tr
    @MadLin-hj4tr4 жыл бұрын

    Felicitari!

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    4 жыл бұрын

    Mulțumim pentru abonare!

  • @ejsgarage
    @ejsgarage4 жыл бұрын

    Very VW nice video. I love VW. I just subscribed to your channel.

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    4 жыл бұрын

    Thank you EJ! It means a lot coming from another content creator

  • @deividaslidik3176
    @deividaslidik31767 ай бұрын

    Great video!

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    6 ай бұрын

    Thank you so much for the comment! It will help our channel grow.🤗

  • @tpgmadara
    @tpgmadara3 жыл бұрын

    Salutare ! Se aude un trosnit când virez stânga pe loc , este posibil ca problema sa fie din rulmentul flansei ?

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    3 жыл бұрын

    Foarte posibil. Roagă pe cineva să asculte de afară . De asemenea poti suspenda masina, dai roata jos si virezi stanga-dreapta. Ar trebui să se simtă o vibrație în arc dacă ține cineva mâna pe el. Acea vibrație se transmite de la rulmentul flanșei.

  • @aleksandars88
    @aleksandars883 жыл бұрын

    Why they put arrows on struit mount? It looks the same from any side

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    3 жыл бұрын

    Hey Aleksadars88! They have to face the driving directions of the car (forward and backwards) and if you check the position of the holes for the bolts holding the struts there is only one possible position.

  • @game4alaughman

    @game4alaughman

    4 ай бұрын

    @@TheDIYWorkshop2020very confusing the arrows…. Do you put across left to right. Or front to back ?

  • @BCRichWarlock08
    @BCRichWarlock08 Жыл бұрын

    Do you need an alignment afterwards?

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    Жыл бұрын

    Hi! No need for alignment.

  • @denisveste3890
    @denisveste38903 жыл бұрын

    care sunt simtomele >?

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    3 жыл бұрын

    Salut, Denis! cel mai des este vorba de sunete asemenea unor trosnituri pe partea cu pricina atunci cand virezi pe loc. La început mai ușoare și mult mai zgomotoase pe măsură ce trece timpul.

  • @celiachristian2107
    @celiachristian2107 Жыл бұрын

    What if the arrows don't line up when it is being bolted up? Will it cause the springs to turn and make noise?

  • @TheDIYWorkshop2020

    @TheDIYWorkshop2020

    Жыл бұрын

    Honestly, Celia , we never got it wrong so we wouldn't know. You suspect that it may have happened on your car? Did you change the strut mount recently?

Келесі