DIY vibrating table
Тәжірибелік нұсқаулар және стиль
Production of a small vibrating table for casting vibrocast paving slabs
This table was made for the manufacture of a small volume of paving stones and paving slabs.
He coped with his task perfectly, the tile turned out without air shells and even with gloss on the front part.
The table itself did not fail, the motor did not fall apart. Article stroimasterskaya.ru/articles/1769
Of course, for industrial needs, the table area is needed more, and the motor is more reliable. It’s better to take a real vibromotor. But this is completely different money :(
#vibrating_table #DIY #design #do_it_yourself #how_to_do #concrete_casting #paving_slabs #vibration_casting
See the same way as I did the deep concrete vibro-compactor (vibrator) - • Internal vibrator for ...
Music
Composition - Renegade Jubilee
Posted by The Whole Other
Пікірлер: 16
For a small volume of sidewalks, you can make a temporary vibrating table, which later is convenient to use as the basis for a workbench. The motor for this design is better to fix separately, not on the movable part of the table. Then the motor will last a long time, and it is best to use a special vibration motor.
Good idia
What is this for friend?
nice video .. I will make one .to cast some stainless steel fibers refractory panels for a wood burning stove . place the fibers in the mold and pour the refractory slurry over then vibrate the slurry through the fibers .
@Clever-Bill
3 жыл бұрын
I wish you everything worked out in your business!
putting the off set on the motor pulley will just knock the bearings out!
@Clever-Bill
4 жыл бұрын
Of course, it is better to set the off set on a separate shaft and connect it to the motor through a belt drive. In my case, the bearings remained intact, the motor did not break, and I fulfilled my task by casting the required amount of tile.
Fancy chair
Plz I want molds help me
@shameervkh7524
3 жыл бұрын
iam help 9447910644
आपका वीडियो बहुत अच्छा रहा है मुझको मशीन वाला
@Clever-Bill
3 жыл бұрын
धन्यवाद
Hello sir
@Clever-Bill
2 жыл бұрын
Hello :)
@ssdwonder4324
2 жыл бұрын
@@Clever-Bill sir apke paver block ke factory hay kaya ?
@Clever-Bill
2 жыл бұрын
@@ssdwonder4324 Unfortunately, I do not know the technical parameters of the motor, since they were absent on the engine. The motor is not fast.