Thanks for stopping by, If you have time you can check out my new range of Eggs here www.etsy.com/shop/bensworx

@liamkinley672

2 жыл бұрын

finally able to order an egg. when ever i had extra $$ you would be sold out. now to not so patiently await its arrival. 😁 also, will you bring the nebulla egg back in the future? q

@skylastudioz

2 жыл бұрын

BRILLIANT!!! Absolutely Stunning!!! What a gorgeous project to bring in the new year!!! I can't afford any of your eggs... I would buy several if I had the ability... My situation is unique... I can't just "go get a job" I'm not a felon, I am new to USA, I am a legal immigrant but cannot legally work yet. Still doing the lengthy legal process... It's hard.

@liamkinley672

2 жыл бұрын

@@skylastudioz one day you will be able to own one of his beautiful eggs i have been obsessing over owning one for over a year.

@skylastudioz

2 жыл бұрын

@@liamkinley672 🥰

@BensWorx

2 жыл бұрын

Thanks Liam 😊 yes I’ll make some more Nebula eggs soon 👍

I have spent more time watching you then my son today... he's two... he's also enthralled.

I love the new new name for the new pressure pot .

@BensWorx

2 жыл бұрын

Thanks Jimmy

@jimmyanderson5725

2 жыл бұрын

Queen was a great 👍 band . And the graphics for it so cool Ben.👍☝️

the little jellyfish and snorkel bubbles were a great surprise

@BensWorx

2 жыл бұрын

Thanks Liam 😊

Love love love the tribute to Freddie Mercury’s Under Pressure! It’s perfect! The project turned out awesome 👏. Well done!

I really like the new side narrations. It’s different and new. This turned out great!

@BensWorx

2 жыл бұрын

Thanks Mate

You did a perfect job of conveying motion in the water. It feels like I’m really seeing someone dive at night.

Hi everyone, thanks for stopping by, I can’t wait to show you this one!

@veneraberens4653

2 жыл бұрын

SPECTACULAR BEN AS ALWAYS 😀NOT YELLING ALMOST COMPLETELY BLIND

@BensWorx

2 жыл бұрын

@@veneraberens4653 THANKS VENERA

@veneraberens4653

2 жыл бұрын

@@BensWorx I JUST LOVE WHAT YOU CREATE DAILY

@adammakesstuff2225

2 жыл бұрын

Any chance you would have some details on that little sander you use? Looks like a great tool to add to the collection

That's great, Ben. It was inspired to display it the way you did. I couldn't make the premiere but I still wanted to watch. Bill

@BensWorx

2 жыл бұрын

Thanks Bill

Beautiful with the bubbles and jellyfish.

I hate having to wait, counting the minutes

Very cool project. Naming the pot Freddie was great, and such a laugh when you said you were sticking it in him, classic

@BensWorx

2 жыл бұрын

Thanks Jarrod 😊

Now we’re getting back to the stuff I like. Fantastic Ben

@BensWorx

2 жыл бұрын

Thanks Mate

Wow Ben...just Wow😁 Edit; Great tribute to Mr. Mercury.

it's like the diver is under ice... what an amazing effect. great piece

@BensWorx

2 жыл бұрын

Thankyou

Love this one. Maybe one day you can do one with a ship under water that looks like its been sunk. Love this channel

@BensWorx

2 жыл бұрын

Thanks Mate

I like seeing you invest in yourself. Well done on the new equipment.

@BensWorx

2 жыл бұрын

Thanks Rebecca

As a diver, this is so cool!

Absolutely STUNNING Ben!

Craftsmanship!!👍👍

That looks sick! Bummer you couldn’t have both of the divers there since divers actually dive in pairs. I love Freddie! Lets put him to good use!

@BensWorx

2 жыл бұрын

Thanks Nate

Some cool updates to the shop lately--Freddy, the 3D printer, the orbital sander, the live calypso band playing while you work...

@BensWorx

2 жыл бұрын

Thanks Gordon 😊

That's brilliant Ben, even the shape kinda looks like a fish 🐠 Wonders will never cease what you will come up with next 👍

@BensWorx

2 жыл бұрын

Thanks Lorraine 😊

It turned out amazing! And so did Freddie LOL

beautiful underwater-themed lamp, Ben

@BensWorx

2 жыл бұрын

Thanks Glenn

Very clever name for your pressure pot. This is beautiful

@BensWorx

2 жыл бұрын

Thanks Melissa 😊

Spectacular as always Ben!

All I can say is wow!

@BensWorx

2 жыл бұрын

Thankyou

Although I was a huge fan of "Frank the Tank" Freddie is so cool. Love it bro

truly are an artist

Awesome. Glad you’re back

I legit thought this was a community post from dope or nope for a second cause they just did a video on resin art 😂 Can’t wait to see this one!

Ben that is one gorgeous piece of work !

Almost midnight here in the uk and struggling to stay awake-hurry Ben lol 😜

@BensWorx

2 жыл бұрын

Hang in there mate 😂

Awesome job Ben looks great and should do another batman project again

This is awesome Ben, welcome back! My son said Freddie is a "neverending dad joke" haha

Absolutely awesome Ben glad to see you doing well take care and stay safe and warm god bless.

I think this is one of my all time favorites!!

Can’t wait to see it. 👍

Lovely piece. Your work is so different and creative. Keep up the great work.

I love it! Turned out so spooky and cool like the ocean really is

@BensWorx

2 жыл бұрын

Thankyou 😊

Woah! That machine that made the divers is so cool!! Makes me want to watch how it’s made 😅 End result is amazing, per usual!

Holy cats man! Excellent work! Turned out incredibly!

@BensWorx

2 жыл бұрын

Thankyou

I really like how this one looks and turned out! I do miss the detailed, longer videos though. But awesome nonetheless! Can't wait to see what's next! Take care!

@BensWorx

2 жыл бұрын

Thanks Mate

@DBitowf

2 жыл бұрын

@@cap5856 to each their own, I like the longer detailed videos because I like learning from them and Ben's channel is the first resin/wood working channel I ever watched. He's Entertaining and quite skilled. Fun to watch no matter what though. So I'll be watching regardless.

Amazing! What a lovely idea for a lamp. Thanks for sharing. Take care.

Hi Ben, I enjoy your videos, you do such interesting projects with resin. I noticed the ultrasonic cleaner you used for cleaning your 3D prints. I'm not sure if you are using isopropyl alcohol, methylated spirits or water for the cleaning (as there are some water washable printing resins). If using isopropyl alcohol it can be a fire hazard/explosion risk due to the alcohol vapors. As the ultrasonic works, the vapor can ignite if there is any faulty wiring on the machine itself or nearby. This is especially true if your machine has a heating function. An easy solution for this is to fill the metal bin with water, then put your prints in a plastic ziploc bag with the alcohol and seal it. The vibrations go through the water and into the bag without the risk of vapors escaping. I just wanted to let you know as I've been researching about ultrasonics for my own 3D printing needs. Keep up the great work!

Brilliant project. Those little glass beads were a smart addition. They really do look like bubbles.

@BensWorx

2 жыл бұрын

Thanks Angi 😊

The new Clear Series is awesome Ben

@BensWorx

2 жыл бұрын

Thanks Mark

I'm so fascinated by those 3D printers. It's amazing what they can do.

Sry for all my comments lol. You should definitely put the cut piece on the lathe. And I really like the cove/cave area for the diver. Very cool. One of my favorites

I'd love to see you pull off a DragonBall. Love your stuff. 👍👍

That is impressive!! I love it! Great job, Ben!

@BensWorx

2 жыл бұрын

Thanks Mike

Idk if "stick it in Freddie" is the best transitional phrase here

@cptrikester2671

2 жыл бұрын

Was going to make a similar comment, but you got there first. 🤪🤣😳

That looks so cool! Especially once you turned the lights off and the unpainted burl was basically invisible

@BensWorx

2 жыл бұрын

Thanks Mate

Absolutely stellar buddy

Nicely done Ben!

I laughed so hard when you showed freddy. That's awesome. Cool video. Enjoy your day.

@BensWorx

2 жыл бұрын

Thankyou, you too!

Freddy is a perfect name! ❤ Love the diorama!! 🥰

Magnificent !!!!!!!!!!!!!!

@BensWorx

2 жыл бұрын

Thanks Jerry

I just wanted to say that this channel is still extremely underrated. But I'm sure you will grow much bigger one day! You deserve so much more! The content is amazing and your works are literally breathtaking! Just absolutely amazing job with this piece too! Wish I could have an art pieces like that on my table. I must check out those amazing eggs too! They look phenomenal! 👍

That looks really cool.

Wow, that's super cool. I'm impressed with how well you were able to pour multiple layers of the "water" resin without the witness line between each pour showing. Hard to mix each batch of resin the exact same color like that.

Very nice work, Ben. Really loved how it turned out. Glad you have better luck than I do. If it had been my project, the crack would've been right through the diver.

@BensWorx

2 жыл бұрын

Thanks Mate

BRILLIANCE

Awesome work. Being a SCUBA diver myself. This piece really resin-ates with me 😉

Hi Ben my friend! Ben you made a masterpiece! I absolutely love anything to do with water and the ocean. You can add this to my long list of favorites. When you ask at the end of the year what our favs are, you just know I'll mention this one! Give Nicole a kiss on the cheek for the beads. They really look good. They add great detail. I'm sorry you had to cut some off. But it doesn't take away from it's beauty!

@BensWorx

2 жыл бұрын

Thanks Tracy

Yo Mr. Ben I really need dat Stay Safe And Stay BLESSED Fam

@BensWorx

2 жыл бұрын

Thanks Mate

This is a fun one!

Just going to get my ☕ this will be good 😁👍 Loved it lit in the dark and it looked like only the water bit existed, so cool..... and Thank you.

@BensWorx

2 жыл бұрын

Thanks Alison 😊

I like that! Well done!

Beautiful!!!

great piece, cant wait to see what u do with the offcut...

Once again amazing work Ben!

@BensWorx

2 жыл бұрын

Thanks Kevin

I love watching you do your art. Thank you very much

As always another great project. I love it great job.👍🙂

@BensWorx

2 жыл бұрын

Thanks Mate

Love this one really cool

This is my favorite of your pieces. This is beautiful! I love the details in it too!

Yo, this looks awesome bro … Keep em’ comin dude! 😎👍✨

I legit laughed out loud when you turned the pot around and played the snippet of Under Pressure 😆 As for the chunk you cut off... More keychains like the 30 minute challenge one you did a while back? Or... I don't know enough about working with wood and resin to know if this would work, just how thin can you cut and polish it? Because if you *could* slice that super super thin it would make a gorgeous bookmark.

As a scuba diver myself, I love this one. Very beautiful.

@BensWorx

2 жыл бұрын

Thanks Ed

Heck yeah sir looks great 👍

This project looks soooooooo good! Nicely done!! I was wondering, what do you do with all the wooden stirring-sticks? You should make something with them. Throw them in a glass/container when you are done using them. That way you add one/two each time you do a resinproject.

I JUST love that beautiful underwater-themed lamp, Ben!! 😃 Great job as usual!! 😃

@BensWorx

2 жыл бұрын

Thankyou 😊

Wow! The effect of the beads was so cool. I love your attention to details. This is a stunning piece, Ben!

Awesome first job of the year👍

@BensWorx

2 жыл бұрын

Thanks Allan

Another great project Ben!!

@BensWorx

2 жыл бұрын

Thanks Holly

Great work. I am April Fool 1983 s. Mother .we all love your work..

@BensWorx

2 жыл бұрын

Thankyou 😊

Absolutely beautiful!!

@BensWorx

2 жыл бұрын

Thankyou

Hi Ben! Quick tip- if you don't wait for full cure and do a second pour while first one in gelatinous stage- you won't have a visible seam and you won't need glue to have your objects in the middle, they will stick when placed on top of fresh resin. I use this all the time (I do it for a living) and recently I had to make huge cylinders with resin printed corn, cucumber, tomato and potato 1 to 1 scale. I used resin with 1 week cure time for 1kg pours so it won't warp, boil or crack, and still had to do it in 3 pours. There were no seams visible because I didn't wait for full cure, just made sure it's hard just enough to hold my objects in place. And for large pours like this you can use tabletop epoxy with longer cure times- 3, 5 or 7 days, depending on your volume. It won't warp or crack.

Nice work congratulations👏

That came out beautiful, Ben! Love it!

Love this one! Great job Ben!

@BensWorx

2 жыл бұрын

Thanks Joe 😊

Wow, this is maybe my favourite project you've ever done. Inspiring stuff!

That came out awesome!

@BensWorx

2 жыл бұрын

Thanks Eric

AMAZING WORK! Even when something doesn't work right you find a way to make it work. That's why I love your channel!

@BensWorx

2 жыл бұрын

Thanks Mate

OMG I CANT WAIT FOR THIS, I ALREADY KNOW ITS GONNA BE OUTSTANDING!!

wow had no notification, two days late, but worth it well done

Looks great.

This is very beautiful work like the little diver swimming really cool

That is so cool!