The right word to describe this piece of art is..... "WOWWWWWW" congrats

Thanks for the tip on them inside brackets.

Love love the toy box. And thank you for the tips.

WHEN ATTACHING THE HINGE TO THE TOP, I SAW A LADY USE DOUBLE BACK TAPE, KNOCK THE PINS OUT,DRILLED FOR SCREWS,REMOVED TAPE ADD SCREWS,DRIVE PIN BACK IN. WORKED WELL

Great build. I've been wanting to build a toy box for my granddaughter and I really like your design. Thank you for sharing.

@Bretts_Builds

7 жыл бұрын

thank you!

Outstanding design and execution

Good job, easy to follow. Great tips!

Just found my next project! Always love your videos!

@Bretts_Builds

7 жыл бұрын

thank you! Best of luck with your build!

Great work and nice results.

@Bretts_Builds

7 жыл бұрын

thank you!

great video, and great idea for the feet, not seen that before, just about to build a small stand (box / table) for my brother in laws new cylinder fish tank. thanks for posting from Garry in the UK

@Bretts_Builds

5 жыл бұрын

Thanks Garry!

Really good mate, great advice all throughout. Great video.

@Bretts_Builds

7 жыл бұрын

thanks!

Beautiful build!

@Bretts_Builds

7 жыл бұрын

thank you!

Great work and well instructed

@Bretts_Builds

6 жыл бұрын

Thanks!

Man that looks awesome great craftsmanship! Stay Blessed!

@Bretts_Builds

6 жыл бұрын

Thank you, you too!

Great work! I really benefited from watching.

Very nice!!

Awesome toy chest. I built something similar for my daughter and struggled with the lid supports too.

@Bretts_Builds

7 жыл бұрын

Thank you! Also glad I'm not the only one out there, I was wondering if it was just me haha

Great job!

@Bretts_Builds

7 жыл бұрын

thank you!

Love it !

Spot on !

Love the method of making the feet! Great looking project. New subscriber here!

great video and great work

@Bretts_Builds

7 жыл бұрын

thank you!

complimenti Brett. . . . . bel lavoro

Great video!

@Bretts_Builds

7 жыл бұрын

thank you!

Отличный сундук!!!!! Такой я еще не делал, обязательно сделаю для дочери)

Like it. Good Job!

@Bretts_Builds

6 жыл бұрын

Thank you!

Subscribed before even seeing the video just for the HP shirt.

Nice toy box. I think the gap between the lid and box is beneficial so your kids fingers have less odds of pinching

@Bretts_Builds

7 жыл бұрын

thanks! yeah it was a last minute add on by the client so I wasn't able to grab video of it but it was just a bit of precision work with the jigsaw and a good bit of sanding haha

Great job on the legs

@Bretts_Builds

7 жыл бұрын

thank you!

nice and perfect 👍

@Bretts_Builds

7 жыл бұрын

idk about perfect but I do my best haha thanks for watching!

Mate, an absolutely top job. I'll be making one of these for a customer. If I was to make one criticism, it would be the exposed pocket holes. I'll be filling them in with a bit of putty. But, overall, I think it turned out fantastic. Keep them coming mate.

@robwhoa

5 жыл бұрын

Built By Chris could you design with the pocket holes on the outside and cover with the trim work? In other words, a plywood box with the pocket holes on outside, and finish the outside with trim which would cover the joinery?

Very nice.

@Bretts_Builds

7 жыл бұрын

thank you!

Very Nice

@Bretts_Builds

7 жыл бұрын

thank you!

excelente!

@Bretts_Builds

7 жыл бұрын

thank you!

I made them legs today for my sons toy box What a brilliant idea and you right a lot of dust. Mine was made out of MDF Thank you Brett great video All the best from Ireland

@Bretts_Builds

7 жыл бұрын

thank you for the kind words, hope the project turned out great!

Did I miss the part where you make the gap between lid and front/sides of box. is it just routed. great job

Let me tell you awesome video... I saved it and subscribe to your channel I love making things I'm going to build this for my daughter

Beautiful work. Do you have a rockibg hirse video?

muito bom valeu

Hmmm I finally followed Robert's advice and took woodprix instructions. It's great for beginners, and has some advanced stuff too.

My daughter will be born in a few weeks, and I was looking for a nice chest to make her, and this is amazing. Thank you so much for the video!

@Bretts_Builds

7 жыл бұрын

Thanks for the kind words man, best of luck on your build and best wishes for you and the family!

I wish I had half of these tools

Bravo molto bello quando avrò un figlio penso che lo farò anche io.. :-)

@Bretts_Builds

7 жыл бұрын

thank you!

absolutly fantastic job but you should have filled the pocket holes inside the box as me personally think u should have filled em before painting

The feet are great!!

I am worried about the weight of it using 3/4 inch plywood, if I change some of the demensions would there be any reason I couldn't use 1/2 inch plywood instead. also I like to have it 21 inch deep instead of 15 inch deep. would I have to widen the pieces you add to the external sides.

I love your project, it is very pretty at the end. I am sure Lily loved it. How could I make the legs larger?

@Bretts_Builds

6 жыл бұрын

Thanks! If you'd like to make the legs larger, I would recommend using a much thicker block so you have more material to work with. If you just need them taller, just use a wider board.

Gran trabajo, saludos

@Bretts_Builds

7 жыл бұрын

thank you!

@elizabethgarcia732

6 жыл бұрын

Marcos Lopez hsndfif

Nice job. Do you like the dust deputy?

@Bretts_Builds

7 жыл бұрын

thanks! yeah it does a good job. I might upgrade down the road but this is perfect for light use in a small space

What type of plywood did you use

Hi! I love this toy chest, do you think if I wanted to add a cushion on top to also make it a bench would it support weight? Or should I not do that?

@Bretts_Builds

7 жыл бұрын

Hey there, thank you! yeah you can definitely sit on it.

@marimarbles

7 жыл бұрын

Brett Withjack thank you so much

What are the measurements of the lid?

Great video - but the music is a tad too loud: makes it hard to hear your voice at times!

Hi Brett, great toy chest! Would you happen to have the measurements and plans written out as I would love to make this! Thanks so much!

@Bretts_Builds

6 жыл бұрын

Hey thank you! The box portion (not including height from the feet) was 20" tall, 18" wide, and 38" in length. Hope that helps!

@pianonut814

3 жыл бұрын

He writes it all out before he starts cutting and building but it looks like it’s majority one sheet of plywood other than legs but I’d have to watch again and write it out

Do you have a link to the closing hinges you used?

@Bretts_Builds

3 жыл бұрын

Here ya go! www.amazon.com/dp/B07V1MS4F9/ref=cm_sw_em_r_mt_dp_J00EDZE9WFH6GY5ZT0W9

Hi, great build. I'm going to try to build something similar as a christmas gift for my niece. Question: Where did you buy the lid supports?

@Bretts_Builds

6 жыл бұрын

Hey there, thank you! You can pick them up at any local home good store like Home Depot or lowes.

@Mithien

6 жыл бұрын

Thanks. I'm from Norway and my local stores of that type does not carry anything similar. I need to order the lid supports online, so I was hoping you'd have any kind of name/brand/product sheet/whatever so I can search online for something similar.

Please clarify, when cutting the legs on the miter saw, what is the dimension from the first 45° cut to the 90° cut?

@Mingomya

4 жыл бұрын

He said one inch

where did you get the hinges from?

@Bretts_Builds

7 жыл бұрын

Home Depot or Lowes

What is that jig you use for the pocket screws?

@Bretts_Builds

6 жыл бұрын

Kregg Jig

After watching several times, I noticed that the finished chest has a gap between the lid and front/sides. ? How was that done?

@pianonut814

3 жыл бұрын

He said in another comment he had some precision jigsaw work to go about an inch down and sand the heck out of it. Apparently the customer asked for it after the build part of the video was filmed

How did you get the gap at the lid ?

@pianonut814

3 жыл бұрын

He said in another comment it was a last minute addition after the build video. He used the jigsaw to dip about an inch and sanded it down

Great build, but that is not furniture grade ply.

No, 10 minutes of that damn music is all I can stand.

Mine works too. I used woodprix plans and build it without any problems.

nice video but pls kill the music

Great simple project. PLEASE lose the music. I ended up muting about five minutes in.

Lovely bit of work but please lose the music

Just get rid of the music it is irritatingly loud and, to be honest, is like bubble gum for the ears.