I live in a country where it is difficult to buy filament, however there are lots and lots of bottles available for free. I am trying to build a filament extruder. I'm on an extremely limited budget. Your video is the best one yet. After watching it, the task doesnt seen so scary. Thank you.

@inventions654

5 ай бұрын

Great, thank you and good luck!

nice design, thanks for sharing

Use a bicycle pump and attach a nozzle at the mouth with the cap. Pressurize and slowly heat up.

😀

Muito bom!

Thnx

Well, i got a cutter with the machine i traded months ago, but never managed to cut straight and acceptable lines with any of the cutters i had... 100% i will make it automated, so the fila maker machine will pull the line to cut it (slow, but more accurate) but i would need the Perfect cutter for it... The one i got is similar to this (but sadly no rod to hold the bottle) but never really worked out. There comes the problem you mentioned at the end, the bottles. We dont really have straight bottles (didnt even see any in our stores) but using heat is ruining the process, or a part of the bottle if you ruin it by accident, and some of the crap shit EU bottles cant even manage the heat so the bottlecap will fly off literally.... :D

real voice ,can the music

Hi, do you have a link to your STL for the bottle cutter? I would love to use your design, looks great.

@inventions654

10 ай бұрын

Hi, yes I have it, but I'm still tuning it, when it's ready I can provide it. But that's in the next videos. Now I'm running a little late and I'm tuning the printer, so my work on the PET bottle cutter is getting longer.

@michaelrussell5586

8 ай бұрын

Just post the STL… we are dying to give your model a try LOL. If you are like me, I won’t get back to it for a year. Love your video!

do you have the stl files public?

Уже есть вариант с шестеренками для настройки ширины ленты .

hey, could you send me the nozzle your using? because ive tried drilling a nozzle but the drill bit kept breaking

Bom dia brohter, excelente o conceito, mas está faltando o link do STL! Ajuda a gente aí vai! :)

@inventions654

8 ай бұрын

Thank you for your interest, the whole concept is still in the design phase :-) I'm working on another video, but there's still not enough time for it :-/ :-)

Dear sir, how can I overcome that the bottle creeps up and the strip gets smaller and smaller, even a weight on the bottle did not help

@inventions654

4 ай бұрын

Hello, I think this is the mentioned problem. In other words, the bottom of the bottle is not straight and is very crooked, or the tape guidance is generally bad.

Oh PET like P E T cutter... I was looking for something else.

Can you please share the stl file of the bottle cutter?

@inventions654

8 ай бұрын

Thank you for your interest, the whole concept is still in the design phase :-) I'm working on another video, but there's still not enough time for it :-/ :-)

@AtlantisRouTou

4 ай бұрын

Always welcome drive.google.com/drive/u/0/mobile/folders/1dZt_md5HvzvhJHkd0jt-X09GqNWF04Xx?pli=1

1.75 mm nozzle how to get

bonjour je cherche le fichier merci

Це український канал? Щось не зрозумів)

@inventions654

9 ай бұрын

це не український канал, ти що не зрозумів?

@smertrusne3156

7 ай бұрын

- Головне щоб не пацакідорський.

@inventions654

7 ай бұрын

Вибачте, але я не знаю, що таке пацакідорський? :D

@smertrusne3156

7 ай бұрын

@@inventions654 - Один з варіантів називати русскіх.

@sabovruslan

7 ай бұрын

@@inventions654 якщо б зрозумів то не питав би 😉