You make it very easy to make the job very difficult.

@unclejediisampsonii3624

2 жыл бұрын

Yes, good job but you made something easy, very difficult to understand

Greaaaaaat

What was the mechanical design advantage to having the schedule 40 PVC 16mm inside the Schedule 80 32mm pipe? Was this just to act as a flow restrictor - without creating smaller holes? [almost like an ebb and flow system]

@2lefthands

2 жыл бұрын

Yes, just the flow restrictor.

buenisimo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@2lefthands

2 жыл бұрын

Thank you!

great

@2lefthands

3 жыл бұрын

Thank you for watching.

Szia! A közepén lévő kis 5 rétegű cső és a 40 es PVC cső közötti összefüggést nem nagyon értem. Elmagyaráznád?

@2lefthands

3 жыл бұрын

Szia! Ha csak egy sima cső lenne benne, akkor az alsó rész vizes lenne a felső meg száraz. Ezért van ez a speciális cső kialakítva, hogy fentről lefele fokozatosan telik meg a cső vízzel. A legtöbb víz felül folyik ki ami a gravitáció hatására lefele mozog a toronyban.

How does the watering system work..Sorry for being Dumb

What do you call that grey glue thing?

@2lefthands

3 жыл бұрын

PVC glue

Is that a grinder you use to cut the lines?

@2lefthands

2 жыл бұрын

Metal Cutting Disc / Angle Grinder Disc

Whats all the grey pipe you were making for?

@2lefthands

2 жыл бұрын

Irrigation? :)

Nice work there! subbed and liked! Where i live this 2mx200mm pvc pipe costs 154 euros or 157 dollars. I am curious about the price you bought it?

@2lefthands

3 жыл бұрын

I bought 20-25 euros.

@hlibbabo7285

3 жыл бұрын

@@2lefthands Thanks alot! Yes, we are always getting robbed here in Iceland.

@atomizer2665

3 жыл бұрын

@@hlibbabo7285 160mm sewer pipe is a lot cheaper (£23/3m here in the uk) You can also use 150mm or 200mm rigid pvc ducting which has a 1.5mm wall but its very sturdy once you have formed the pockets.

@sasahezina8959

22 күн бұрын

Zdravím neuvolňují se z trubky nějaké škodliviny nebo jedy do jahod zdravím z České republiky

Waou

@2lefthands

5 ай бұрын

Thank you!

MONEY CREW🤘🏿🤘🏿🤘🏿

@2lefthands

5 ай бұрын

Thank you for watching.

Was würde das kosten wenn sie für einen das bauen???coole Idee 💡

@2lefthands

2 жыл бұрын

Thank you.

Way easier if you hold the heat gun longer really heat it then stick bottle all the way in 1 time. You are making a lot more work for yourself

@2lefthands

5 ай бұрын

Thank you for watching.

You need to put what measurements you are using on the video.

@2lefthands

3 жыл бұрын

Please, check the description. :)

@atomizer2665

3 жыл бұрын

The slits are a quarter of the circumference, approx 157mm. You can save a lot of time if you make a template out of thin card, basically cut a 100mm x 650mm strip of thin card. Wrap it around the sewer pipe and tape the join to form a sliding cylinder. Mark the middle and end positions of the slots on the top and bottom edge of the template .The top and bottom slots will be staggered. To use the template simply align the template edge with the starting line and mark the 4 slots, slide the template up and rotate it so the slots you just drew on the tube align with the slots on the bottom of the template. You can now draw next row of slots using the top edge of the template. Rinse and repeat until all the slots are marked. If you have more than one tower to do you can transfer the template by sliding it off the tube onto an end plug.

Nem lenne egyszerubb egy csepegteto rendszert belerakni? Azota hogy mukodik a torony? Van update video?

@2lefthands

5 ай бұрын

Kösz jól működik, igaz már nem eper van benne. Mivel nincs nyomás a rendszerben ezért szerintem a csepegtető nem működne, de ki lehet próbálni.

@Zsolt67

5 ай бұрын

@@2lefthands mit sikerult még termeszteni igy?

@2lefthands

5 ай бұрын

Különböző zöldségek, saláták (madár, rukkola), fűszernövények, feleségem használja sok minden van bennük.

Że zwukłymi otworami wygląda lepiej nie traci rura kształtu

@2lefthands

2 жыл бұрын

This is very strong pipe.

ни чего не понял

@2lefthands

5 ай бұрын

Watch the part 2 : kzread.info/dash/bejne/dp2TlJamfKfIfso.html

pretty video. whopee. It would have been nice to HEAR what you are doing and why. The video doesn't explain jack about what you are doing, how it helps, what it is for. Not a blasted thing. I've seen lots of youtube videos about hydroponics and my wife and I would like to get into it. But cut the cutesy wootsey music and explain things..... You give a list of materials. But no instruction about how to use them, what to do. Nothing. Why not put a link to download the instructions and drawings? Failing that can you email a how-to or actual instructional information? or am i supposed to have cosmic powers to understand things?????

@2lefthands

2 жыл бұрын

Sorry, I don't like speaking. I show how to used materials in the video.

@escapegoat3472

Жыл бұрын

@@2lefthands don't worry. It's clear what is happening. It's your video. Make it the way you want. Good stuff. Subscribed.

And the worst: TEN Thumbs. regarding your hair color, you must be much smarter than you showed. I fear for the worst.

@2lefthands

3 жыл бұрын

:D