DIY statue and collectibles display case! Vol.1 Quick and cheap!
Ойын-сауық
** UPDATE!! THERE’S NOW AND UPDATED VIDEO TO THIS FORST “HOW TO” VIDEO. PLEASE FOLLOW UP THIS VIDEO WITH VOL. 2 TO MAKE THESE CASES FASTER, EASIER, AND CHEAPER! **
In this video we will be discussing how to display your statues in a in impressive way for minimum cost with things that can be found from the hardware store and Amazon! This is the DIY display case!
Here are all the thinks you need to complete this display case for yourself.
www.homedepot.com/p/Edsal-60-...
www.homedepot.com/p/OPTIX-36-...
www.walmart.com/ip/Mainstays-...
www.amazon.com/gp/product/B01...
www.amazon.com/gp/product/B01...
www.amazon.com/gp/product/B07...
Пікірлер: 336
This was an amazing video...learned more in the past 20 mins than the past 3 months of watching these type of videos
Thank you so much for making this. I’ve got the Sideshow 1/3 Venom on order as my first statue and have been stressing about how to display. This is going to be great. Thank you!!!
Went out and bought the 72×48 in version of this case and its easily going to be able to hold all of my bigger pieces. So happy I stumbled apon your video. This is going to change my life.
@BogleArts
4 жыл бұрын
SuperWheatley happy to help
Thank you for taking the time to make an extensive video explaining the whole process kindly and thanks to the good Adam Prince for his great contribution, a very humble person who always helps
This is so cool - I’m gonna do something similar without the acrylic (just don’t like glass myself) and turn the bottoms into drawers/cabinets for storage so I can have all of my statues at eye level. Thanks for this!
Much respect to you sir. Great job with your display. I wish I was gifted like you in craftsmanship. I may have to work some overtime and pay for someone to do something like that for my display. Thanks for sharing!
Bro you're a godsend something on the market like that would cost five to seven hundred bucks maybe even more
@BogleArts
3 жыл бұрын
idiosinkratik and yet it’s half of that amount. Glad the video helped!
@metroidcypher
3 жыл бұрын
nah more like 1k to 3k
@shroomgod1990
2 жыл бұрын
A display like this is 1,600 before taxes and shipping
Thank you so much!!! I bought these shelves (also inspired by Adam) but I haven't dressed them up yet because I wasn't sure what to do about the edges. Your vinyl idea is brilliant. The display looks amazing.
@BogleArts
4 жыл бұрын
thedarkside0fmars thanks a lot dude! I’m pretty stoked with how it came out. If you need any help or suggestions just holler
Wow, I was looking at Moducases but they are so expensive. This is a great DIY cost effective option and they look GREAT!! Thanks for posting this!
Dude this is a rad idea!
Very clean & classy. Also badass collection
Great video! Shelves look great!
Dude! Thank you so much for all these great tips on making one of these! I just finished mine and it came out great!
@BogleArts
3 жыл бұрын
Hell yeah!
Thank you SO SO much for doing this video!!! I've been researching how to display my 1/4 statues and this is something I am going to definitely consider, it's beautiful!
@BogleArts
4 жыл бұрын
Heather Condon thanks! Definitely the best bang for the buck. Let me know if you have any questions!
Thank you so much for sharing this. I can’t wait to make this, this will work great for my prime 1 berserk statues
@BogleArts
3 жыл бұрын
That’s currently what I’m using it for too! Good luck!
That's so awesome! I have been thinking about making a shelf display similar to this! I guess our creative tattoo artist minds think alike! Phenomenal job!
@shroomgod1990
2 жыл бұрын
These look almost as good as Moducases for a fraction of the cost. The statue community are extremely knowledgeable when it comes to this. I got many ideas from the communities on Facebook but KZread is just as good
I'm an absolute DIY noob, I've never built my own stuff before, but I've been recently collecting figures and a few statues over the past year and a half, and am about to (hopefully!) get my own place in a month or 2 so I've really been wanting to get a nice display for my stuff (I've unboxed nothing yet haha) I remember looking around for DIY displays because of course customizing your stuff is the best way to get what you want, but all the other things I saw about were a) suuuuper difficult and very long to build and/or b) not exactly what I was looking for. But what you've got here is like perfect. I want something pretty big with acrylic windows around 3 or 4 sides so I can get a nice view of my statues and this is like... perfect for me. And it seems just so damn easy to build and put together aswell! This has gotten me pretty excited to try working on something like this sometime next year. Thanks for posting this. It's the first nice custom clean looking display on KZread that I really really really like and seems very doable even for a noob like me.
Honestly, I like the Detolf display and lighting, it’s bright and looks amazing side by side.
@BogleArts
3 жыл бұрын
Agreed but can’t hold what I’m currently collecting
Just wanted to say, I've been going crazy looking for a way to display my Pure Arts Assassin's Creed statues that are huge and your video is pure gold! Definitely saved me tons of money. Earned a sub.
@BogleArts
3 жыл бұрын
GamerThumbTV thanks! Please share the video when you can do others can get on board! Good luck with the build
@GamerThumbTV
3 жыл бұрын
@@BogleArts most definitely. Once I get everything together I'm doing a room tour video and I'll make sure to shout out your channel!
This is sick!
Been looking at some new display ideas and this is def on my list of ideas now. Just subbed. Thinking about getting into some statues now. Keep up the great content!
@BogleArts
3 жыл бұрын
Marie C thanks!
Appreciate this video. Was sent to me by a buddy and I just ordered everything for 3. Can’t wait to start setting them up. I’ll have lots of empty space in them but not for long.
@BogleArts
3 жыл бұрын
Glad it helped dude! They really are the jam for the cost
Wow awesome job I’m happy for you ! Love the idea of covering the Velcro...shelving is one of the most important things in the collecting hobby and I believe this is one of the best ideas especially for the low cost ! Hopefully more people will do the same thanks for the shout out mannnnn ✌🏼
@BogleArts
4 жыл бұрын
Adam Statuehunter thanks a lot for all the help dude!
@AdamAdam-wp9qk
4 жыл бұрын
BogleArts your welcome!!
Props for this video man! I just made my own case and LOVE it! Linked you up in my video 🙌🏾🙌🏾
awesome! thanks for showing us!
Wow that vinyl borders sold it to me! Congrats bro! 🔥
Great video.
I used the acrylic glass attached with sticky Velcro after watching this and my display looks so good! Thank you for the great tips! 😁
@BogleArts
3 жыл бұрын
Absolutely! So glad it helped
Love this and just got to say that those Maul and Savage statues are awesome!
@BogleArts
2 жыл бұрын
Thanks literally just sold them haha
Great video! Keep posting stuff like this!!!
Hey man, I just want to thank you for sharing this , I made a couple tweaks but you brought my collection looking beautiful.
@BogleArts
Жыл бұрын
My pleasure
You deserve way more subs. Really appreciate this + your second video!
@BogleArts
2 жыл бұрын
Thanks very much
Awesome man! Thanks for sharing.
Hey! Thanks for this video as I have watched it several times when waiting for my muscle rack setup. I didn’t go through with the plexi and the velcro, but I am going to get the lights and hide them the best I can between the shelves.
Mate, just found your channel and this video is a godsend! Thanks so much for uploading this video, going to help me so much now I'm off to watch Vol 2
@BogleArts
2 жыл бұрын
Glad it helps
Awesome vid, great details and explanation. The outcome is incredible for the price
@BogleArts
4 жыл бұрын
mrbaloche I couldn’t agree more. Definitely the most bang for the buck
Love your videos man
@BogleArts
3 жыл бұрын
Thanks for watching!! Stay tuned!
@geekroomlife5850
3 жыл бұрын
@@BogleArts def will do, collection while miles ahead of my collection, ours is in the same vein
Fantastic. Great information thank you
Great video tutorial 😎👍 very informative
Awesome set up. Definitely going to go with this. Especially since I collect 1/4 scale statues along with hot toys and my deltofs aren’t enough anymore. Been looking for a new set up.
@BogleArts
4 жыл бұрын
Marcos Solorio I did all this bc I was in the exact same situation. So glad I could help. Share and tell your ppl!
Awesome
great collection
Hi, I bought the Edsal 72Hx36Wx18inD black shelves from depot. I also bought the same LEDS from Amazon you got. I mostly will go get Acrylic glass at homedepot this weekend plus the tape to cover the holes on metal bars. I cant wait to add my PF wolverine by sideshow in there. It will look sick as yours!!!😁
This is good. I've been vainly trying to come up with a closed cabinet way to display figures and Lego sets, and I CANNOT BELIEVE what display cabinets cost. This still isn't cheap, but it's a lot cheaper.
Amazing! Going to watch the updated video as well. +1 sub!
Thanks dude this video was exactly what I've been looking for. Definitely going to try it. Super cool to get the answer I've been looking for from someone also in Louisiana
@BogleArts
3 жыл бұрын
SinisterXpr oh yeah? What part of LA are you in? I don’t know to many other Louisiana based statue collectors
@SinisterXpr
3 жыл бұрын
@@BogleArts Lafayette. Yea same dont know of many. So im glad i found your channel.
Dam, that’s one if the nicest displays I’ve seen
BIG THANKS FOR THIS IDEA!! Actually I have thought of this before: having a steel rack and acrylic glass sheet. However, I don't have any idea on how to put the glass into the shelf and not to stick it permanently for me to freely add/change/remove the figures inside. Thank you for giving me these ideas. This I think is a cheaper option than the glass cabs! 😁
@carlosviramontes9785
2 жыл бұрын
Use strip magnets or regular magnets
Oh my God, thanks for sharing this diy video with us here on KZread. I think there's a lot of Action figures collector that can use this video to do the same to display our collection. I think if it's possible I would like to buy the acrylic panels a bit thicker for stability but man think is a cool project to do. Again thanks for sharing
very informative! thank you!
Great video..I was actually looking to get this garage shelves also..lol
Enjoyed the video!!
@BogleArts
4 жыл бұрын
Batman Statue Collector thanks!
Great work bro... love it
@BogleArts
4 жыл бұрын
Radd Titan thank you for the kind words! Big fan of you guys
Thank you bro, I have the same shelving units and been trying to make them look better and came across your video on a Facebook page. Definitely know the humidity problems I'm in the New Orleans area too but anyway awesome collection you got, keep up the great work and videos
@BogleArts
4 жыл бұрын
djchaos2685 hell yeah man always glad to hear from a local.
Nice. Love the video man. Ive been meaning to make a display shelf for my figures. Can’t wait to try this one out
@BogleArts
4 жыл бұрын
Yoshi Ookami let me know how it goes!
@yoshiookami7939
4 жыл бұрын
BogleArts will do! Question: how well does this set up keep dust out?
@BogleArts
4 жыл бұрын
Yoshi Ookami particularly well
Thanks for this. I have been struggling to figure out a cost-effective way to manage my expanded 1/4 scale statue collection. I'd mostly done 1/6 and 1/12 figures for years, but this is going to be great for displaying the statues and protecting them from a particularly unpredictable feline....
@BogleArts
3 жыл бұрын
Plastic Slacks Toys literally protecting my piece from the same threat. A cat. Lol glad it helped.
Nice video dude. Given me some ideas for my set up. Might have to put in some step platforms for smaller figures and collectables 🤔
great set up brother im gunna try my hand at it in my next build in my 1st bulid i had just a half shelf instead of using curtains tho for the back i used pvs foamboard to give it more of a solid looking back its cheap and can be held on with some double sided tape thanks for the video
Thanks for this DIY video! I have the industrial shelves and was thinking of how to get the acrylic glass to mount. Where did you get the vinyl wrap at? I didn't see a link to them posted. I was also thinking of a way to get magnets to stick the acrylic glass, and glue the opposite magnet to the metal shelves so they could just mount on and off easily then cover it up with vinyl.
@BogleArts
4 жыл бұрын
ActionJackson83 the website is Uscutter.com there’s a screen shot of the website in the video. Sorry thought i added the link.
Dope video but it would of been better if you showed the whole process while you talked over
Very useful ..!
Much appreciated, thank you!
@BogleArts
4 жыл бұрын
Tru Savage anytime!
Great video brother with great information
@BogleArts
4 жыл бұрын
Andre Wilmot 👍🏼👍🏼
Your the man!
Hi can i ask? Is the vinyl you use to cover the acrylic glass in front is same to like electrical vinyl tape? Thanks! Nice display case also
Brilliant idea and very cost effective 👍. Just 1 thought, instead of using velcro on the clear sheet, have you try using magnetic strip instead?
@BogleArts
3 жыл бұрын
There are some people that have used magnets. However the Velcro acts like a hinge on a cabinet door when you open one side. With magnets you have to take the entire glass off every time. The hinge method with the Velcro has certainly seem to be the best way so far. Again you can do magnets but it is more difficult to manage when getting into the cases.
Thanks for the vid!
@BogleArts
4 жыл бұрын
Joshua Bulger II anytime! Hope it helped
I personally, am starting a Broly collection. So, the figures themselves vary in size. So I've been having difficulty trying to settle on a great display case. I really like the museum light idea, and will probably use the curtains for the floor and walls of the cases. Any recommendations would be great
just stumbled on your video looking for ideas to display my ever growing collection thats still all in boxes. out of curiosity did you think about mounting acrylic with magnets?
Lighting took me a bit I'm about to do the velcro but I notice we have the exact same case lol so I see around 21:01 you also have this lip on yours, did you just cut a strip in half to make it 1/2 inch approx to put on the top and bottom? Cause that lip is small and when I tried to mock place the strip it totally hangs off that.
@BogleArts
3 жыл бұрын
I would let half the tape hang off the edge of the acrylic and used a razor blade to trim it. Hope that helps
@sixscalemafia
3 жыл бұрын
@@BogleArts thank you great idea, the alternative was laying it flat and tryin to cut that would be a pain in the butt. thanks again, it's slowly coming together :)
The shelving unit i am looking at is 72H X 48W X 24D . Do you have any suggestions on what fabric to use ? My concern is that if i use two of the ones you posted it wouldn't look as clean with a divider line . Any advice would be appreciated .
@BogleArts
2 жыл бұрын
You can find wider fabric at a fabric stor e
Would you be able to install risers ? As well as adjust the middle shelf. I think this would be perfect for 1/6 scale figures and I was looking for something to showcase quite a few figures at once. Also one more thing as far as the lighting goes would you recommend these same style lights for what I’m going for ? Or would you say maybe the led strips in the cool white colorwith the V style paneling ?
@BogleArts
3 жыл бұрын
Risers would be a great idea. And you can use all of the shelves for a smaller figures I just took some out because mine are larger
Wonder what’s best using the magnet tape or the Velcro for the acrylic
Thanks I'm going to do exactly what you did but for my consoles.
thanks for the info
Great video! You just got 1 new subscriber :)
Yo, sorry for all the questions. I received the LEDs you posted link at Amazon today and I tested them to see if they all work. I did noticed a small yellow ball type reflecting off the mini LED to surface..do yours have that issue, I mean it isnt that bad, but just checking if all are like that.
@BogleArts
2 жыл бұрын
I didn’t experience that
How is the dust? with this dose a lot get in?
I don’t want to do the acrylic just a preference but I love the idea. What exactly can I use to get a black trim look and cover up the holes in the metal?
@BogleArts
3 жыл бұрын
Not sure. Maybe glue magnets to come kind of strips? The acrylic is Important to cover the edges but I think you can think of something. Just have to be creative
@andrewmeans49
3 жыл бұрын
Wondering I could just use some black tape..
You mentioned some concern about moisture? I am also in the south, my wife and I have a private toy museum at home. I would recommend investing in dehumidifiers, (one per room) to maintain a dry environment. We keep ours running night and day to help protect our collection.
@BogleArts
3 жыл бұрын
Open By Chance awesome advice thanks!
Ive ordered the sideshow 1/6 jabba the hutt figure so i need a big space. The freaking thing itself is 32” long. Moducases are out of the question as the cabinet for that figure alone will set me back £400, AND i have to wait 6 months for it. Then theres my bajillion hot toys figures to house too. Probably looking at £2000+ for a set of Moducases. Your video has given me so many ideas. Im pretty confident now i can whip up a sleek new display for under £500 which will house EVERYTHING. Thanks for the video. Thumbs up from me. 👍
@BogleArts
3 жыл бұрын
Thanks for the response!
hey, mate, im doing an acrylic panel for a case i have, gona go with velcro, would polycarbonate work ? the panel needs to be 36inch by19, do you think 3/16 inch thick is thick enough ? . and if polycarbonate not good, would you tell me what type and thickness do you recommend for my project. Thanks
@BogleArts
Жыл бұрын
So I don’t know what polycarbonate is but my glass is 1/8” thick and it’s perfect.
This is awesome needed something to display my elder scrolls and Zelda dbz collection needed one that would be an entire wall size could always lift stack and add some type of rubber mount or something to have the corners connect as an idea.
Where did you get the standing ones and lights ?? Need one for my knife collection
Curios if you take cost out of the equation if you would do another acrylic panel on the back instead of doing the fabric? Have you noticed any dust or anything in the case with using the fabric, or any other disadvantages?
@BogleArts
3 жыл бұрын
No dust what so ever inside the cases
Also is it necessary to get the extension cord for the lighting?
@BogleArts
2 жыл бұрын
No it’s not
Hey, how are the LED lights holding up this whole time you have them?
Hey mate love this build doing 3 myself and a bit different one later thanks for the video just wanted to know what the thickness of the acrylic sheet cheers from downunder
@BogleArts
3 жыл бұрын
1/8” thick- good luck with the build
@shaunbradbrook2311
3 жыл бұрын
@@BogleArts cheers mate appreciate it
Hey mate looks like the extension cables are sold out. Any idea where else I could get them from?
On the acrylic sheet that you had listed does one sheet cover the sides and front
@BogleArts
2 жыл бұрын
You’ll need to two sheets for the whole case
I’m in Louisiana too aka New Orleans I just bought the Gladiator shelves 5 tier 36 in W, 72 in H, 18 in D. This is my first time ever buying these shelves I believe they’re adjustable and I won’t need all five of the shelves because I have 1/4 scale statues coming well I’ll be good?
@BogleArts
3 жыл бұрын
Yeah should be fine
Thanks for the video! its reallh clear and detaoled. Did you have to cut the acrylic or the one that u provide in the link already matches the size of the shelf? Thanks!!
@BogleArts
4 жыл бұрын
Richard Rustanto it really just depends on what shelf you end up getting for your space. But if the specs match, then no cutting required
@rivin777
4 жыл бұрын
Thanks again for the video! i went to a lumber store to help get mh acrylic cut. For the lights, did you buy the six pack and where did u place the?
@BogleArts
4 жыл бұрын
Richard Rustanto thanks! I cut the acrylic myself. I explain how I did it in the video somewhere. Glad you liked it
@BogleArts
4 жыл бұрын
Yes I bought 2 of the 6pack. One 6 pack per shelf
I just the link..but there out of stock..dang. I can always get the 72in high..but it's more expensive. Very helpful video. I'll save to follow and how I can do this as well.
Could you post a link to Adam's post? You said his was a different size. Im curious to see what his looks like.
Nice build. Can I ask a favor? Can you measure from the bottom of the shelf to the top so I can order acrylic? I'm going the route of ordering custom acrylic and shelves won't be in for another week or so. Is your shelf on the bottom option? Can it go lower?
@BogleArts
3 жыл бұрын
You can technically not use wood on the bottoms shelf and just set the statues on the floor with the black fabric giving the illusion there’s a shelf but you actually get a few more inches. The dimensions of the shelves are in the beginning of the video. As long as the acrylic is cut to the same size as the shelf you ordered, where the shelves are placed is irrelevant.
@seanehook
3 жыл бұрын
@@BogleArts Thanks. I'm tracking. I know the height of the overall unit but I need to get acrylic the exact size, So for example, the overall unit is 60" but it appears the first shelf starts about an inch or two up so I would need to order acylic at 58/59".
This looks amazing. Ima have to watch this video like 3x. It looks like a Moducase. Now the shelving unit I have is in grey. Should I spray paint black cause I do want it all blacked out with no white or can I also cover the inside with Vinyl tape making it all black? Thanks for any advice. Thanks for the great in detail video.
@BogleArts
2 жыл бұрын
I would paint them black
@shroomgod1990
2 жыл бұрын
@@BogleArts thanks man I am going to do that with a gloss black. What did you use for the backboard? Where did you get that? I’m having a hard time finding a thick black poster board that’s at least 36” wide
@shroomgod1990
2 жыл бұрын
@@BogleArts I just purchased the 2 sheets of acrylic from your link. Appreciate all the work. I can’t wait to get everything and make this cause the end product is amazing. Basically a moducase.
Cool set up man, how dust proof is it and how do you remove your statues from the cabinet?
@BogleArts
4 жыл бұрын
Ginio Guzman it’s pretty awesome as far as dust goes so far. The acrylic is Velcroed to the frame of the shelf. There’s details about that part in the video. Thanks!
What is the black trim you have on the front of the acrylic panels?
@BogleArts
3 жыл бұрын
1.5” black vinyl tape
Thanks a lot for the video. I made one also!
@BogleArts
3 жыл бұрын
Nice!
Brother I just found your channel and excited over your creativity. I found your site by searching for my daughter Lego Disney castle she made wanted to add to. Smaller version. If you have any shelves (setups)you recommend as it’s 25 inches tall x16 inches. Lastly, I was blown away by the hyperrealistic figures of Batman and Terminator ! Where the heck you buy those????