DIY SPRINTER VAN-How to install VELIT 12V DC Air Conditioner unit
Тәжірибелік нұсқаулар және стиль
Here is the link where we bought the unit from. This is not a sponsored link.
www.mobilesolarconsulting.com...
thank you for watching. Please consider subscribing to my channel. I appreciate your support.
#vanconversion #diy #outdoors #sprinter
@bochuonoutdoorsvanbuild
Пікірлер: 9
I installed a Velit recently as well. A couple of things I learned on the install. When you install the studs into the AC unit you should use the supplied nuts to lock the studs in place then use the nylon locking nuts to secure the AC to the cross members. The other thing that I did was to re-route the power wires by pulling the wires into the case and drilling new port holes on the side for the wiring harness. The wires are pretty short when left outside of the unit and this made it much easier to connect to the wiring harness with fuse boxes. The mesh panel pops out easily to give access to the case. I'm still trying to figure out how to wire this so that I can use a Bluetti so I haven't tested it yet.
@BoChuonOUTDOORSVANBUILD
Ай бұрын
Thanks for the tip Jason.
Thanks Bo! Good info.
I installed Velit to my van. It is great A/C unit !!
Nice to see that even the pros make mistakes! Good install, Bo!
@BoChuonOUTDOORSVANBUILD
Ай бұрын
🤣🤣
I need help with the AC installation! Thanks
@BoChuonOUTDOORSVANBUILD
11 күн бұрын
Bchuon66@gmail.com Please email me
@BoChuonOUTDOORSVANBUILD
11 күн бұрын
Please email me bchuon66@gmail.com