This looks so therapeutic

Amazing tutorial video with patience I clearly do not possess. I envy you guys that are able to do this DIY and save loads of $$$ in the process 😢.

@tesbros

Жыл бұрын

We believe in you 😊

Wow! Amazing video save lot of money. Thanks for shared

Amazing vid bro.

Perfect i was thinking to ask you if you have It with no sensor. Thanks

Great tutorial. Hope you are offering PPF for the s/x too like the chrome delete.

@tesbros

Жыл бұрын

We will!

I always see of on black looking like a Matt color . Does the of make it look like that or is there a gloss clear as well?

I bought a can of color matched Rustoleum oil based high gloss paint and touch up the bumper as needed. Cost $12.

Somehow I missed seeing some trapped water under the PPF before sealing the edges. It appears to be about a half teaspoon. Will it evaporate in the sun over time?

@tesbros

Жыл бұрын

It should within a week or so

@tesbros do you guys make the PPF on 3M? I saw your video on that and it looked like the 3M was superior.

@tesbros

Жыл бұрын

We found that Avery is very comparable. 3M is fantastic product. We found that our customers has had very high success with Avery so we like using it for our kits.

My brother installs these pre cut covers and charges about $400 to$600 per hour for install. I believe his last job was $1200 in material and 3700 for labor. But he was done in about 3 hours

@adamgen1236

Жыл бұрын

I think your brother is BSing you

@paulg8065

3 ай бұрын

@@adamgen1236$4500 is a great deal for full PPF in my area. $5000-7500 is average.

Would it be a good idea to wax the area after washing? I suppose the question would apply to PPF prep in general.

@tesbros

Жыл бұрын

You should not wax after prep. You want the paint to be in its most original form with no coatings for the ppf to adhere properly. You can ceramic coat after installation.

@rkgsd

Жыл бұрын

@@tesbros Glad I asked and glad you quickly responded!Thanks

Do you have to spray tack solution every were under the film? Or do you just use the tack solution in certain spots

@tesbros

Жыл бұрын

You spray slip everywhere under the film to make sure it "slips" around and slides into place, and then use tack when you need to flush out slip solution and "tack" something down. So yes, only for certain spots.

@saverioconca6303

Жыл бұрын

@@tesbros Thanks for the quick response. Another dumb question. If you’re only using the tack solution around certain spots on the edges does that mean the film has its own tack that eventually sticks to the car ….. what is not clear to me is what makes the film stick if you are not spraying it all with tack solution….

@tesbros

Жыл бұрын

Good questions! The film has adhesive that's activated by the solutions and squeegeeing. The tack just gives it that extra stick which is really needed when you’re stretching. With only slip when stretching, it might stay but it doesn’t grab as aggressively.

@saverioconca6303

Жыл бұрын

@@tesbros thanks 🙏 I think I will give it a try your video was very good. I just bought the 2023 model y AWD can you recommend a film. Also we’re can I get the two solutions that was not clear do I make it or buy it? Thanks again

@tesbros

Жыл бұрын

Congrats! You can buy our front ppf kit here - tesbros.com/products/diy-front-protection-kit-ppf-for-model-y - and it includes the bumper, fenders, headlights/foglights, mirrors, and hood, along with the solutions and everything you need to complete the project. We use Avery Supreme Defense PPF in our kits. You can also check out our free course that walks you through everything (this video is a part of it) here - courses.tesbros.com/courses/diy-front-ppf-kit-for-tesla-model-y/

About how long would you say it takes to complete this for the bumper? And how long for the whole Model Y?

@tesbros

Жыл бұрын

1-2 hours for the bumper. For the front kit (bumper, fenders, mirrors, headlights/foglights, and hood), it'll take 8-12 hours. For the entire Model Y, I would double that time at least. It would take 2-3 days for a full wrap realistically.

@GungleJeorge

Жыл бұрын

​@TESBROS very realistic numbers. Now I understand why pro wraps are $$$ for the time and skill.

Tesbros, It looks like you offer the full front ppf kit for Model Y. Will you be offering full body kit?

@tesbros

Жыл бұрын

Yes! We will this year. If you already have the front kit, there will be an option to purchase the rest.

@photai5375

Жыл бұрын

Thank you for the quick reply. I’m going to hold off on buying since I will not receive our Model Y for another 2-3 months.

@maicg01

Жыл бұрын

Wow! Amazing video save lot of money. Thanks for shared 👍

How long after install can you remove the contamination? I just did my hood ppf and it is perfect except for one piece of dust in the middle of the hood.

@tesbros

Жыл бұрын

That’s not an ideal location since you would have to remove most of the film to get it out. Honestly, I would leave it if you can live with it since you risk more contamination, bubbles, stretching and glue lines by lifting it up. Especially as I see this message was from 30 min ago, I bet it's pretty tacked down already. The dust spot will dissipate overtime!

@tesbros

Жыл бұрын

However, if it's a big issue for you, email us a support@tesbros.com with photos if you have any more questions or want to see about getting a replacement piece.

@FrederikSua

Жыл бұрын

@@tesbros appreciate it! I'll see how it settles in the next couple days and if it's still pissing me off I'll get in touch. I love the tutorials and your guys support is awesome!

Next video Can you explain without using the “go ahead”?

@paulg8065

3 ай бұрын

Then some will go behind instead

Do you guys sell the matte PPF kit, can’t find it on your site? Thanks!

@tesbros

Жыл бұрын

No, not yet. When we sell the full PPF kit, we’ll offer the matte option!

@mmpressey

Жыл бұрын

@@tesbros You know how much time for the full kit? I see on the site there a advertisement for it.

@tesbros

Жыл бұрын

@@mmpressey we only offer the front kit right now (bumper, mirrors, fenders, hood, headlights and fog lights). If you want to purchase this now and then the rest of the full body kit when it comes out in a few months, we’ll have that option!

@mmpressey

Жыл бұрын

@@tesbros I got you. Only thing is, depending on the price of the matte I'd want that.

Where can I order ppf front bumper? Please send link

@tesbros

Жыл бұрын

Here is the Model Y front kit with everything included: tesbros.com/products/diy-front-protection-kit-ppf-for-model-y Make sure you select whether you need sensor cut outs or not. If you ONLY want the front bumper, you can buy individual parts here: tesbros.com/products/diy-front-protection-parts-ppf-for-model-y

Is this matte or gloss?

@tesbros

Жыл бұрын

This was installed in matte to make it easier to see in camera without a glare.

$800 dyu more expensive than the shop😂