We have used the kzread.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

It would be helpful if you listed the parts and where to get them along with a schematic.

@religionisapoison2413

Жыл бұрын

Thinking the same thing. Trying to build one with lifepo4 battery... Charging at a hotel AC or 12v DC

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

@wrenchingvids

2 ай бұрын

@@religionisapoison2413 See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Very professional build. Have fun stay safe.

I built something very similar, using the exact same Husky toolbox, but I out the battery in the bottom and all of the output stuff in the middle box. Very cool stuff!

Great build! Thanks for sharing.

Thanks for adding the link for the charge controller. I ordered one received it in 3 days and it works like a charm it is hooked to my Harbor Freight 100 amp folding suitcase solar and charging a 100 amp 12 volt lithium battery.

Nice build!

Please make a video how you build your power station. I want to build one my self. 😊😊😊 Thanks and more power!

@mikejack9796

Ай бұрын

it very easy once you know what you doing how run wire etc 🥰🥰🥰🥰😇😇😇he do very good job

Wow..! AWESOME setup..!

Pretty fantastic build

Currently looking into building a set up like this. Thank you for the video and the explanation through out. Just wanted to let you know i appreciate you. Thanks again.

@wrenchingvids

Жыл бұрын

Thank you!!! Let me know if you need any help.

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Thanks for posting the build. For truck camper, van the use of a DIY portable power station allows for greater 12 volt DC, 120 watt output than the typical Bluetti/Goal Zero/Jackery of the same watt/hour battery size. In my opinion, a 120 watt DC output doesn't cut it for some of the larger and better off road 12 volt DC portable air compressors. With an Anderson connection output port - the output can easily be 240 watts, which is more than enough for current surge at air compressor start up.

Great post, going used leaf acid battery and that is it for now, many dollars for upgrade.

That little battery monitor is really nice for the price, I just got one.

Pretty cool

Very quality build. I did something very similar using a different case. I was trying to figure out the battery monitor screen. I might have to pick that up.

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Awesome ⚡️ 👁 ❤ IT!

Put a thermal temperature switch in for the fan comes on when it wants to

Really NICE job, Nick. Yes, I know about having polarity reversed on those push-in connectors and frying a device. Ugh. Next time I build one of these I'll used the 2-pin connectors with the threaded collar connector. Suggestion: Have 2 fans, one on the opposite side, exhausting air. Also, when you can afford it, get a LiFePO4 lithium battery. It weighs a third of Lead-acid, and lasts twice as long. I'm looking forward to getting a DC fridge like yours.

@wrenchingvids

Жыл бұрын

Thanks! This is a lifepo4 battery, 50ah

@1painter4hire

Жыл бұрын

That's a very expensive battery he has in there I believe.

@wrenchingvids

Жыл бұрын

@@1painter4hire yes, battery alone was about $300

Nice.

Thank you for a really good informative video. I like the noco charger set up. Could you please tell me what model charger you have and the accessories that you bought to get it working through the lid, thank you

Good job! New subscriber here.

😊😊😊nice build am building my own 3000 watts pure sine wave am going have 4 out let 110 AC volt with 15A breaker switch for each out put and cooling fan usb port with 12 way fused block water proof with solar charger etc 😊😊😊

That looks awesome on the go electric battery on the go, do u have a list. I would like to make one. Thx from Texas

nice to add an led light or 2.. drop in a rv stereo/ speaks! .. 50 amp connector for engine jump?

Fabulous!!!! I’m curious how much the whole unit weighs as well as how much say the battery weighs on its own? I take long multi-state, thousand mile motorcycle trips with my wife, her dog while pulling a small cargo trailer so I’m constantly looking for ways to save on weight. While also being able to have and use certain things that run on electricity is ideal. I purchased a Jackery unit but it did not seem to last very long for what we needed it for. Also how much do you believe you put into this system in terms of money? Thanks!

I have the same mppt solar charger. One review on Amazon had a picture of the solar controller after it caught on fire. That mppt solar controller gets very hot. I was afraid it would cause some kind of damage. I am using a Lensun 20a waterproof mppt solar charge controller to charge my two diy battery builds. One is 640wh (12v 50a Lifepo4) The other is 1280wh (12v 100a Lifepo4)

@wrenchingvids

Жыл бұрын

Strange things happen, but it mostly likely caught fire because it was hooked up backwards. This controller doesn’t have polarity protection in it. In my experience, it produces almost no heat and that’s charging at about 8 amps. It’s always been room temp to the touch.

Excellent presentation and well described! Just a minor point....Can I respectfully suggest you move the camera more slowly...I got dizzy the way it chopped and changed! Keep up the good work!

@wrenchingvids

Жыл бұрын

Heard. Thank you!

do you have a circuit breaker for the main fuse box? i put one on mine because it's a massive 120AH battery and i thought it would be better safe than sorry.

Great job! I built one with a 30A batt and it runs my 47w ICECO fridge for 7 hrs before the fridge shuts down for low v. Something to think about… how does the box vent that hot air when recharging on AC? The fan is just a current draw. I would move the AC charger out of the box and let solar do the charging and dump the fan. Deletes two items. Just a thought but great job!

@wrenchingvids

10 ай бұрын

Thanks. I’ve been using it for over a year and hot air or the fan is not a problem. Yes the charger gets a tad warm when in use but nothing to be concerned about. And the fan, I could have left it out. It’s switched, so not always running but when it is on it’s only like 0.1a draw. I installed a 20amp dcdc charger in the truck that does 90% of the charging now. Runs my fridge and everything else for 2-3 days with no help

@stewartperry7797

10 ай бұрын

@@wrenchingvids nice. That’s one of the best box builds on the tube. Yea, we all add extra stuff we don’t need and more.

Nice build. The biggest thing I would have done differently is to have a main breaker instead of a fuse. If you're in the middle of nowhere and blow a main fuse, do you have a spare?

@wrenchingvids

Жыл бұрын

No but I have supplies/equipment in my tool kit to make a temporary repair if needed.

Greetings Nick! Nice looking portable solar generator. What is the brand of the MPPT controller? What is the model number? I am interested in knowing more about it.

@wrenchingvids

Жыл бұрын

Thanks! Here is a link to it. Happy to answer any questions. Allto Solar Intelligent 10A MPPT Solar Charge Controller,10 Amp 12 Volt Solar Panel Regulator with Digital LCD Display + Temp Sensor + Charging Level for 12 Volt Wet Gel AGM Lithium LiFePO4 Battery a.co/d/jkgEE6F

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Great video awesome job, anyway to get parts list?

@wrenchingvids

7 ай бұрын

I don't have a parts list but if you need any help i can explain stuff and link you to various parts. nmproia@gmail.com

that very nice build love it 😇😇😇😇 well i build my own but i have 20Amp breaker switch for my 110 A/C out so my inverter not will wrong with it the breaker will just flip like breaker that in house

@wrenchingvids

Ай бұрын

Nice!!!

@mikejack9796

Ай бұрын

@@wrenchingvids Thanks not finish yet or i will post video not have all like that guy what i need hard to get

@mikejack9796

Ай бұрын

@@wrenchingvids 🥰🥰🥰🥰thanks not finish building it yet need more things then i post video

Do you have a parts list for the build? I like the display with percentage and draw/charge display you have (but could not read the make/part). Thank you.

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

@sexyjoker2007

Ай бұрын

@@wrenchingvids Thank you kindly sir. Great build, working on mine now. Stuffing Battery charger/tender in there as well, to male 120v port. This way I can shove the extension cord in there and keep it at the ready.

That fridge has a compressor? I thought most of those smaller, portable ones use thermoelectric cooling through peltier effect. Added after the fact: Oops, I guess I have some reading to do. I just found a car refrigerator with similar form factor that uses r134. Alrighty then. The one I found claims to be thermoelectric so that's even more confusing.

Dude why don't you have a bullbar?. Also how did you get a 200 series in the US?

Wow ! That's a great build Man ! Impressive 👍 Would you consider building one of those to sell ? I don't think I'm smart enough to do it, without destroying something. Thanks 👍

@wrenchingvids

Жыл бұрын

Thanks!!! I’ve been strongly considering building them to sell because it was so much fun to make. Where are you located?

@1painter4hire

Жыл бұрын

@@wrenchingvids sorry for wait, I'm in IL 60014 . Thanks

@wrenchingvids

Жыл бұрын

@@1painter4hire send me an email. Nmproia@gmail.com

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

What size fuses do you have for the USB and cigarette

@wrenchingvids

Ай бұрын

Most automobile applications run a max of 12 amps in those types of outlets. So I put a 15 amp fuse on them

Hi, why do you move your fridge off your battery when you are charging the battery using your noco plug in charger? tia

@wrenchingvids

Жыл бұрын

So the fridge draws about 4.5 amps and the battery charges at 5 amps. If you have the fridge plugged in to the battery while its charging, it’ll never charge up. It’ll just stay at whatever % it’s at. Think like if you had a bucket with a spigot on it and kept that spigot open as you fill the bucket up with the hose.

@alutious

Жыл бұрын

@@wrenchingvids gr8 thx. My charger said to not charge the battery under a load. Lead acid and smart charger. If I had to I could attach the positive to 1 battery and the negative to the shunt and turn the shutoff switch to the bus. But I wud rather connect the charger to the buses. I guess it works off of voltage. I wonder how it works with solar also feeding the bus bar?

Yes i have two 100 solar panels

What shunt and meter are you running I’m in the process of building me a setup kinda like yours

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

@uncledanny7

2 ай бұрын

@@wrenchingvids do you know when the kit will be available again

@wrenchingvids

2 ай бұрын

@@uncledanny7 The listing had some issues, but I think it's working now. Everyone's patience is much appreciated while I figure all this out!

@uncledanny7

2 ай бұрын

@@wrenchingvids it is working now I will be ordering one in the next few days thanks for doing the leg work for us on this

@wrenchingvids

2 ай бұрын

@@uncledanny7 sounds good! Nmproiaamazon@gmail.com if you need any assistance

Any low voltage shut off as to not drain the battery all the way? it will kill a non deep cell battery pretty quick.

@wrenchingvids

Жыл бұрын

This is a deep cell battery. It also has its own BMS that cuts itself off if capacity gets too low.

@davidreynolds731

Жыл бұрын

@@wrenchingvids nice! Do you have a link? I’m looking to build one to put on my Dewalt tough system set up in my work trailer, for charging my tool batteries without using the generator in neighborhoods, but will be charging it off my trucks trailer accessory power wire.

@davidreynolds731

Жыл бұрын

@@wrenchingvids I’ve killed several batteries running the trailer lights off them and forgetting to shut them off is why I mentioned it, I had to add a low voltage shut off to them.

@wrenchingvids

Жыл бұрын

@@davidreynolds731yep! This is the battery www.renogy.com/lithium-iron-phosphate-battery-12-volt-50-ah/ And this is the DCDC charger I use www.renogy.com/12v-20a-dc-to-dc-on-board-battery-charger/

In the process of planning out a power box... I see a lot of these with fans to ventilate, seemingly just to keep the charger inside the box while charging without getting too hot. Is that the only reason for ventilation? If so, I think I'm going to opt toward simply storing the charger in the box, and when time comes to charge the battery, I'll simply pull out the charger and leave it out when charging since it'll be plugged into a wall anyway at that point and doesn't need to be portable for that duration. I'd rather have a little more protection from the elements with no fans and holes as this will be on the boat.

@wrenchingvids

8 ай бұрын

Yep just for the charger! Not needed if you won’t use the charger inside the box.

@roberthance1187

8 ай бұрын

@@wrenchingvids Made sense to me. Thanks for the quick response!

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Hey everyone! I know this has taken way too long, but I've created a DIY kit that allows you to build your own portable power station! I'll go through and post the link on all the comments so you can view my Amazon page. This Amazon listing is actually my own and not an affiliate link so any purchases made go directly to me! These kits are assembled by me, in my own home and shipped out to you. I'll eventually get them in the Amazon fulfillment system so they will have Prime shipping. Thanks!!! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Do you have a parts list?

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

How much does it weigh?

@wrenchingvids

Жыл бұрын

Weighs around 18 lbs

What’s the benefit of this over ready made?

@wrenchingvids

Жыл бұрын

Repairability and expandability. If something breaks, like say a port or the screen, you can easily very cheaply replace that part. If you want to add more usb ports or another 12v socket, you can get them on amazon for $10 and install it in 5 minutes. If your battery wears out(which would take years), you can throw a new one in in a matter of minutes.

@_morgoth_

Жыл бұрын

100% customizable to your specific needs!

2 months later, still waiting on the list parts!!!!!!!

@wrenchingvids

Жыл бұрын

Yeah, sorry. One of these days I’ll get time to sit down and collect all the links!

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Can I get the parts list?

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

@JamesTremblay

24 күн бұрын

@@wrenchingvids the kit is unavailable and I don't see an individual component list

@wrenchingvids

24 күн бұрын

@@JamesTremblay yeah no one purchased for over a month so I took it down sorry

What’s the cost?

@wrenchingvids

Жыл бұрын

About $450

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

Why not just put all the amazon link there?

@wrenchingvids

Жыл бұрын

Thanks I will work on that

@dmfrdmfr8132

Жыл бұрын

Looks Nice…list would be cool…

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp

😵 Love the details of your video. But not liking the handheld phone video, bouncing around hard to follow and not get dizzy...🤪

@wrenchingvids

Жыл бұрын

Thanks

Turn your mic up.

@duanebodrick3227

Жыл бұрын

Great video, but we can't hear you

@wrenchingvids

Жыл бұрын

Turn your volume up

All these videos are meaningless and help no one. I have this here, and this here blablabla.

@wrenchingvids

4 ай бұрын

Meaningless..... like this comment?

Soooooo, where's the part list brother...just make a diy of this video..

@wrenchingvids

Жыл бұрын

I’m about to start making another one with double the capacity and will make videos documenting the process with parts as I go along

@wrenchingvids

2 ай бұрын

See my comment above! www.amazon.com/dp/B0CZSMRFQT?ref=myi_title_dp