DIY Nissan 370z Differential Cooler + Gear Pump!! Don't spend $800 when you can spend only $200....
Автокөліктер мен көлік құралдары
Welcome back to another episode 🤩. Today we are installing my Differential (gear pump & oil cooler) on to my NISSAN 370Z. This install is to make sure that my NISMO GT-PRO diff is always happy! If you plan on doing a diff cover change (Z1 Diff Cover) or even upgrading to a better diff (NISMO GT-PRO). While you are at it you might as well save yourself some time & do these few small installs for your 370z. Doing all this will definitely make the life of your Diff much longer especially if you are going to ABUSE it like ME! If you have a 370z and wanna see more installs please check out my channel down below. ↓↓↓↓↓
Don't forget you could come and see the car live @Localcarfest SHOW!!!
Saturday, November 23rd, 2019
10:00am-4:00pm
264 Mariah Circle, Corona, CA
FREE TO SPECTATE FOR EVERYONE 😎
OVER 360 CARS WILL BE @ THE SHOW 😎
3RD YEAR IN A ROW OF SELLING OUT 😎
CAN'T WAIT TO SEE ALL YOU GUYS THERE! FIND ME @ THE SHOW FOR FREE THING'S!!
DON'T SLEEP ON IT!! 1ST COME 1ST SERVED 😉😎
ALSO ↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
♕ SUBSCRIBE: / @triggam
♕ 10% off "Soul Function" braces use my code ☞ Triggzz10
☞ www.soulfunction.com/
Subscribe here for build updates on my 370Z. As well as how I manage to afford all these expensive car parts💰.
♕ / @triggam
⇢⇢⇢⇢⇢ FOLLOW ME ⇠⇠⇠⇠⇠
♕ Follow me on instagram:
☞ / notrigga
♕ Follow me on SnapChat:
☞ @notriga
⇢⇢⇢⇢⇢SEND ME STUFF⇠⇠⇠⇠⇠
44260 Apis rd, Temecula, CA 92592
▶︎▶︎▶︎▶︎▶︎ Mod list for today's install ◀︎◀︎◀︎◀︎◀︎
10 ROW OIL COOLER
6AN REDUCER (2X)
6AN 90 DEGREE FITTING (6X)
STEEL BRAIDED LINES
SEA FLOW (GEAR PUMP MD:SFGP1)
HOME DEPOT BRACKET
TAPE
GREASE
LIGHTBAR WIRE HARNESS
ANGLE GRRINDER
IMPACT DRILL
REGUALR DRILL
Пікірлер: 73
Great vid! Be nice to hear what you are saying in some instances throughout the process. Thanks for sharing this with the community!
@TriggaM
4 жыл бұрын
Yes i thought about it as well. Some parts of the video If I wasn't to speed up I would be stuck with like a 20min video. For a yoyrube under 1000 subs thats a bit too long. But please if you have any questions reach out to me in insta @notrigga I would be more then happy to help
That Triggaspec hardware was on point
@TriggaM
4 жыл бұрын
Hell yeah🙌
Splashing air too much creates air bubbles and it froths up and causes more heat... as long as the cooler and pump can keep up you're all good...
@TriggaM
Жыл бұрын
3 years now, no issues. Since it's buttom fed it line is always full no matter what fue to case have more fluid then it would normally now. But yeah I haven't had any issues. It's been all positive and when needed diff cools down really well
awesome video man, You just saved me like 800-1200 bucks. Was about to buy a kit then I saw this video
@TriggaM
3 жыл бұрын
Yes sir 🙌🙌 I actually soon might be offering this kit as whole to sell. Seems demand are high. But that will be in a month or so. Since I need to source all parts again
Well done video you made it all look easy, even made this video look easy to make ! Great!
@TriggaM
Жыл бұрын
Very easy.. just take your time and make sure to wire eveything up correctly.
Cool vid.... Planning the same mod on my 350z and came across this. 😎
@TriggaM
4 жыл бұрын
Thats how we do it baby #keepsaving!! Stoked to see what you do. Shoot me some final pics so I can share on instagram 🤪
great idea bro!| looks sick too!
@TriggaM
Жыл бұрын
Thanks man. Works flawlessly
Very cool I want to do this for my 350z
@TriggaM
3 жыл бұрын
Very easy and effective
Just use 90-110 weight oil , with the slick stuff
Why did you peel the nylon back??
@TriggaM
4 жыл бұрын
For best fit! I coulda possibly pushed them in. But just wasn't feel it. Ether way it works. Been driving on it for a min no issues. Plus after diff maintenance soon. I'm heat wrapping all the lines too
Oh this is great
@TriggaM
6 ай бұрын
Works amazing
Great video man
@TriggaM
3 жыл бұрын
🙌🙌🙌🙌
Great video, very detailed. I have all the parts gathered, did you have any issues with clutch material clogging your pump? I too have a brand new nismo 1.5way. Super expensive lol
@TriggaM
Жыл бұрын
Nope, never had any issue You have to run break in fluid at 1st with normal same grade fluid. When broken in change to nismo fluid. I have two of these diffs, one in my 240sx and other in my Z
@vh45de240sx
Жыл бұрын
@@TriggaM oh ok, thanks for the info.. I was wondering about a break-in period because my diff came with 2 quarts of oil. I won't run a filter either.
Nice man!! Do you have any data from before and after regarding temps?
@TriggaM
Жыл бұрын
When diff fully warm and being abused. You will see about 15 to 20 degrees in heat drop when pump is on and feeding the cooler. This is a very amazing set up
👌
That was a fantastic idea... did almost the same thing on my 2000 F250 7.3... just use a 180 degree temp switch to turn on pump and fan. Kwel Diff... Happy diff!!
@TriggaM
3 жыл бұрын
Yes sir
Pump is only rated for 140 degrees - diffs operate well into the 200 degree range. Pump might not last - just a heads up. Love the video.
@TriggaM
3 жыл бұрын
Huh thats a very good point bro. I never saw that. I had to take thr system off for my stock exhuast to go on for inspection so maybe this time around il changed some things when it goes back on
@bernardwarr4187
2 жыл бұрын
@@TriggaM put the pump down stream for the oil cooler bro, not before
@TriggaM
2 жыл бұрын
It's been working flawlessly for almost 2 years now! No need for movement.
@winebartender6653
Жыл бұрын
@@bernardwarr4187 just to reply to this: oil and fluid temperature will equalize very quickly in a closed loop cooling system. Component order (radiator, pump and whatever is heating the system) does not matter.
@dylandesmond
Жыл бұрын
@wine bartender not if you run a fan 24/7. Correct order is into filtration, then cooler (running fan)and finally pump.... mine never goes over 80 degrees, I thrash mine.
Yes sir !
What was the final result of the diff cooler? Your install looks good.
@TriggaM
4 жыл бұрын
Havent put it to the full.test yet but in the next few video, you will see the whole rear come back toghther, as well as the diff installed & the cooler + pump running. Coming soon 😉🙌
@markh51
4 жыл бұрын
@@TriggaM What Temp sensor did you use. I noticed that it wasn't listed in the parts list you provided.
@TriggaM
4 жыл бұрын
It came provided with the Temperature 🌡 guage
@markh51
4 жыл бұрын
@@TriggaM OK then. Thank you.
Hey man. Did this pump hold up ?
@TriggaM
Жыл бұрын
Yes no issues yet. 4 years have passed now.
You are the best trigga. Keep up these awesome vids!!
@TriggaM
4 жыл бұрын
Nahhh you the Best bro 😉🙌🤙. Thanks for thr kind words. Shoot me a DM (@notrigga) I will send you some free sticker
Hey you put the link on other video for oil pump and for oil lines, first question the link for oil pump is when you open it it is different pictures then your pump and what length lines and size you used?
@TriggaM
3 жыл бұрын
It's just a normal gear pump. Used 6an fittings with SS lines.
@fastpubg9612
3 жыл бұрын
@@TriggaM Hello I was wondering what bolts did you use for your oil pump ?
@TriggaM
3 жыл бұрын
Self taps but now it has rive nuts for easy removal
@fastpubg9612
3 жыл бұрын
@@TriggaM Hello again I am trying figure out where did you connect the wires for you pump, where did you find the electricity for your pump because they are not long enough
@fastpubg9612
3 жыл бұрын
Did you use any extension?
Bro how much would you charge to swap out an LSD ?
@TriggaM
3 жыл бұрын
Like the internal of the pumpkin 🎃 or a complete diff swap?
@cammando117
3 жыл бұрын
@@TriggaM to swap on the vlsd to a wavetrack, I have all parts
@TriggaM
3 жыл бұрын
Can't help you. I dont do diff rebuilds. You gotta have a professional who has the proper tools! Its important that that the diff is put in thr pumpkin 🎃 correctly other wise it will cuase big time damage. Last time I check I got quotes $650 ish for installation
I'm not sure if you were drunk when you filmed this 🤣
@TriggaM
3 жыл бұрын
🤣🤣🤣 I don't drink much my dude and no hahhaha I was flying tho 🤣🤣
Any problems so far?
@TriggaM
Жыл бұрын
Not 1 issue ever
@sergiisylkov5040
Жыл бұрын
@@TriggaM thanks a lot for reply! could you plese tall, pump is running all the time or you manually switching it on? I want do the same but for manual gearbox.
@TriggaM
Жыл бұрын
Won't work for gear box I tried the design Too much work and tbh kinda useless You want that trans fluid to br hot lol in a 6 speed For the diff tho different story Especially since I have a full built diff ($$$$) And yes switch and relay So I can turn it on and off anytime I need to
No why did u pull it back ahhhhhhhhhh 😫
@TriggaM
3 жыл бұрын
Pull what back?
Your not supposed to pull the nylon back like that.
@TriggaM
3 жыл бұрын
True. Still works fine tho! But I am gonna make new lines this time. Since I got a crimp machine now
Haha rusty don’t know anything!
@TriggaM
4 жыл бұрын
He a busta
Was interesting until I learned he'll turn on his viewers at the drop of a hat.
@TriggaM
3 жыл бұрын
😈 me and rusty go way back, if you know you know 😘