DIY Mountain Board - How to make

Making a homemade DIY mountain board by bent laminating plywood, scrap metal tub and some 10” tires from Harbor Freight. This isn’t a homesteading or practical project, but it was a ton of fun and a good way to develop my skills further. If you like this project, here are a couple more that you may like that involve laminated wood. The first is a pallet wood axe handle project and the second is making a Curvy Board for my daughter. I hope you guys enjoy and please consider subscribing for future updates about DIY, homesteading and other random projects☺
Here is a link for the pneumatic tires, it's an amazon one and I'll receive a small commission if you buy via the link. But search around and you might find a cheaper source as well:)
amzn.to/2iTe6R7
Pallet Axe Handle
• Axe handle with pallet...
Curvy Board
• Making a curvy balance...
Music in my videos is sourced from the KZread Audio Library and my brother in law, Trey Harris. Credits are as follows:
First song: Not To Cray by Huma-Huma
Last Song: Plastic Or Paper by Wes Hutchinson

Пікірлер: 1 000

  • @AlDano
    @AlDano6 жыл бұрын

    I like this. I am currently building this but got confused when I noticed the trucks went up and down but didn't swivel. Then after I watched the vid again, I realized you put them on the kick plates so they move on an angle creating the swivel. Otherwise the thing wouldn't turn. Thanks. Can't wait to finish it.

  • @CxStark
    @CxStark7 жыл бұрын

    i cant believe you made trucks so cool man

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    thanks for watching and I'm glad you liked it CX:)

  • @themagicpickle03

    @themagicpickle03

    7 жыл бұрын

    Cx Stark I know right I can't find any other video with diy trucks

  • @50FTY
    @50FTY4 жыл бұрын

    lucky kids to have such a great father,,, beautifully made board...

  • @BenBrandt22
    @BenBrandt227 жыл бұрын

    Very cool. I don't skateboard, but that looks stable enough (and fun enough) that I could see myself trying. Nice work on the mechanics, looks very clean.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Ben! Joe

  • @Jason-TheChad-Muska_circa1995

    @Jason-TheChad-Muska_circa1995

    Жыл бұрын

    Most definitely not. But I understand why you would think that because as you said you don't skateboard. I've been skating for 30 years now as if it this year. I still surf and snowboard even though I am 37 years old. Still skate very a few times a week. I also ride my electric skateboards probably three or four times a week on average and have built a few mountain boards but not like this The boards that I have built are near replica of the BajaBoards. But instead of $6,000 it only cost me about $2,900 because I built all my own battery cells and printed my own ECS's and BMS's. No I'm not trying to like belittle this guy because I think it's cool that he built this And it is by far more than most men of these days can do so I commend him for trying. But in regards to being a safe or comfortable board to ride at any high speeds whatsoever is in an accurate assumption. Anything over about 17 mph on that thing and you're getting it to territory where you could get seriously hurt on it even if you know what you're doing

  • @geocape7060
    @geocape70604 жыл бұрын

    You can build anything. Very impressive.

  • @modelrc9500
    @modelrc95007 жыл бұрын

    No words to describe how genius this is 😛

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much P Skillz! joe

  • @user-sz4cu8mj4x

    @user-sz4cu8mj4x

    7 жыл бұрын

    Hello liked your video, I want to repeat something like that, could you give me the blueprints? Thank you very much in advance!

  • @afrimavzii4849

    @afrimavzii4849

    6 жыл бұрын

    Александр Котов

  • @niumakeita3130

    @niumakeita3130

    5 жыл бұрын

    +Afrim Avzii vgfrttffcggg jfvvytr5576ý7777yyui0

  • @arkalam6377

    @arkalam6377

    5 жыл бұрын

    k7

  • @shaneharris2355
    @shaneharris2355 Жыл бұрын

    I love that you built everything to make this board a reality. Thanks sir sharing. Hoping I can build one of my own soon for wind boarding. Keep you posted.

  • @blucation6060
    @blucation60609 ай бұрын

    Awesome! I had skateboards as a child, I wish I had one of those. Multi million dollar idea!

  • @NazarenoMorelli
    @NazarenoMorelli6 жыл бұрын

    Genius! Congratulations from Argentina! Is very cool!

  • @bo0tybandit
    @bo0tybandit7 жыл бұрын

    Now time to put a motor on it, great project and video.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    haha... yes, but that might be past my skill level...lol! Joe

  • @GLTHM_

    @GLTHM_

    7 жыл бұрын

    Nope u can do it!!

  • @Warcraft5555

    @Warcraft5555

    7 жыл бұрын

    it's just a research thing :) , everyone can do it

  • @Tomas970506

    @Tomas970506

    7 жыл бұрын

    Dude do it! And if it works Im gonna make one myself!

  • @bo0tybandit

    @bo0tybandit

    7 жыл бұрын

    My buddy made one that ran off of alcohol and damn that thing was fun. He's a mechanic so im sure it was easy for him. This 49cc engine looks promising for those that aren't mechanically inclined such as me. www.bikeberry.com/49cc-flying-horse-5g-pull-start-bicycle-engine-kit-4-stroke.html?gclid=Cj0KEQjwsO6-BRDRy8bsxfiV2bkBEiQAF8EzKHE_lmqkSgUy7T-M8UB_9RHqK3P_FdSDB79KTe6acV0aAqjE8P8HAQ

  • @mikejones3769
    @mikejones37697 жыл бұрын

    So much craftsmanship in one video, awesome !

  • @willyanjulio3969
    @willyanjulio39696 жыл бұрын

    Congratulations on your work! I'm Brazilian and I really admire the style of doing it yourself! a big hug

  • @MelancholicSaiko
    @MelancholicSaiko7 жыл бұрын

    FIRST TIME WATCHING A BUILD WHERE THE GUY MAKES THE TRUCKS TOO, IMPRESSIVE AS FUCK

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much ClevexKGB! much appreciated:) Joe

  • @M3iscool

    @M3iscool

    7 жыл бұрын

    Yeah, I was very impressed by that as well.

  • @wizzkidvlogs4415

    @wizzkidvlogs4415

    6 жыл бұрын

    ClevexKGB same

  • @nayeemalikhan16

    @nayeemalikhan16

    6 жыл бұрын

    youtu.be/addme/nNTXI1gsrzXH0ISmZRargle-p7eDLA

  • @bharatale559

    @bharatale559

    6 жыл бұрын

    Slka bott

  • @natewalker7064
    @natewalker70647 жыл бұрын

    Blew my mind with the trucks

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Nate! Joe

  • @alexisoliviernormand2832

    @alexisoliviernormand2832

    7 жыл бұрын

    Nate Walker

  • @backwoodztech9461

    @backwoodztech9461

    7 жыл бұрын

    homesteadonomics what size square tubing did you use? And what strength springs did you use?

  • @eraldoaliu4490

    @eraldoaliu4490

    7 жыл бұрын

    Alexis Olivier Normand

  • @marcossoto2018

    @marcossoto2018

    7 жыл бұрын

    Nate Walker HUDMRTO😄🌷😢😍

  • @ammarjr6117
    @ammarjr61173 жыл бұрын

    This man can build every thing 🔥

  • @Cactusworkshopchannel
    @Cactusworkshopchannel7 жыл бұрын

    TOTALLY awesome!!! I wasn't expecting you to make the tracks as well and it blew my mind. total thumbs up!!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Cactus WS! Joe

  • @vinofarm
    @vinofarm7 жыл бұрын

    Great video and great project! Now you just need to add a motor.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Vino Farm! Yes, a motor would make the uphills much easier:) Joe

  • @julzchar1055

    @julzchar1055

    6 жыл бұрын

    Vino Farm I agree

  • @adelmehdi6174

    @adelmehdi6174

    5 жыл бұрын

    yep

  • @hamzasboui1073

    @hamzasboui1073

    5 жыл бұрын

    .

  • @AlymerKiteboy

    @AlymerKiteboy

    5 жыл бұрын

    No no.... you need to add a KITE!!! 😁

  • @Fentertainment
    @Fentertainment7 жыл бұрын

    Good Job, How are the bearings holding up in the wheels?

  • @prithvirajkanne3629
    @prithvirajkanne36296 жыл бұрын

    Awesome Last few seconds were awesome Daughters are God's direct gifts.

  • @wraith696969
    @wraith6969695 жыл бұрын

    Wish I saw this sooner!!! Love your truck design!!!!

  • @JackmanWorks
    @JackmanWorks7 жыл бұрын

    Super great, I love the DIY truck!!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Paul! sorry for the super slow response... I went on a week long camping trip and just got back a couple days ago... fun trip though:)

  • @PermacultureHomestead
    @PermacultureHomestead7 жыл бұрын

    nice project Joe.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Tory! Joe

  • @MarkyShaw
    @MarkyShaw7 жыл бұрын

    Excellent job!! True craftsmanship. That thing is beautiful. You make it look too easy!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much! It was a super fun project and totally more fun than I expected too:) glad you liked it and thanks for watching! Joe

  • @marcosfunky
    @marcosfunky10 ай бұрын

    This suspesions is doing ok. It looks like it takes fine turns. Great job.

  • @theantichrist6524
    @theantichrist65245 жыл бұрын

    You did a great job on nailing the side to side steering it still looked like the springs were not strong enough would you tell me the compression strength of the springs I would have used 60 80 pound springs I weigh around 200 lbs

  • @jadea7
    @jadea77 жыл бұрын

    Love the build, currently building one of my own. I even have the same Harbour Freight wheels. Question what size threaded rod did you use to mount these and is there a commercial one available? Cause I don't own a welder. Or is it possible for you to build and sell it to me?

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks for checking it out Jadea... I believe it was 5/8" rod. that's what the bore size is listed as on the HF site. Unfortunately I don't sell these things as most are just one of a kind projects that I do for fun. But if you can find a buddy who has access to a welder it's not that hard to make. I'm not a very good welder... so it can definitely be done. As for commercial rods... I'm not sure if they are or aren't available Anyways, hope that helps a little:) Joe

  • @andrel1449
    @andrel14497 жыл бұрын

    Wow indeed u have a golden hands! Thats what i love about people who make their own stuff not buying stuff from big corporations and putting more money into the greedy bastards pockets! Keep up the good work and much love form Estonia!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Rep! Great to hear from Estonia! Joe

  • @rloach067
    @rloach0676 жыл бұрын

    this is super cool! thank you for sharing!

  • @lylekobberstad8571
    @lylekobberstad85717 жыл бұрын

    That is just bad Ass! I've seen other channels make boards but I've never seen anyone make the trucks to go along with it. Can't wait for the pallet wood parachute harness build. ;-)

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Lyle! Yes, the parachute harness is gonna be a difficult one... might be my last video;) Joe

  • @aruns714

    @aruns714

    5 жыл бұрын

    @@homesteadonomics lol😂

  • @summervibes2738

    @summervibes2738

    4 жыл бұрын

    I found this skateboard on Amazon. Check it out: amzn.to/36zTpTt

  • @victorcastillo9068
    @victorcastillo90687 жыл бұрын

    CAN YOU PLEASE TELL ME ABOUT THE MEASURES OF TRIPLAY? (WIDTH, LONG AND THICKNESS) I WANT TO DO ONE LIKE YOU DID... THANK YOU SO MUCH

  • @artyshefartsy
    @artyshefartsy7 жыл бұрын

    Amazing. I've made my own board before, but I've always bought my trucks. It didn't even occur to me that I could make my own trucks!! Thanks for this awesome video!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Glad you liked it Gabby! joe

  • @KentuckyHomesteadFarm
    @KentuckyHomesteadFarm6 жыл бұрын

    If I could like this twice I would, Always love your projects man!!

  • @letsplaygamesofhistory2003
    @letsplaygamesofhistory20037 жыл бұрын

    Great work! Now send it to braille, they skate everything :)

  • @issaacxxx6202

    @issaacxxx6202

    7 жыл бұрын

    Are you kidding??? I love braille, but they break EVERYTHING!

  • @nikhilnakwal3526

    @nikhilnakwal3526

    7 жыл бұрын

    chintu type gt9e

  • @unknown5306

    @unknown5306

    7 жыл бұрын

    OMG do it!!!! Braille skateboarding is awesome!

  • @douaapretty5255

    @douaapretty5255

    6 жыл бұрын

    Ben Bowman123 kidnappé

  • @timvandenberg8178

    @timvandenberg8178

    6 жыл бұрын

    Aaron wil heelflip the five with it

  • @GeorgLesk
    @GeorgLesk7 жыл бұрын

    wonder if one could add a windsurfing-sail to that ☺

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Now that's a cool idea! we do get the winds up here for sure! Joe

  • @GeorgLesk

    @GeorgLesk

    7 жыл бұрын

    Yea, please try it! I would love to see that in video!

  • @_m5738

    @_m5738

    6 жыл бұрын

    مقطع زراب

  • @lachiedixon410

    @lachiedixon410

    6 жыл бұрын

    People already do with kites

  • @FlyingNinjaSquirrels
    @FlyingNinjaSquirrels7 жыл бұрын

    This is awesome! I've been wanting to do something similar but didn't quite know where to start and now I do!! Thank you

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Glad you liked it FNS's :) Joe

  • @davidlee50
    @davidlee507 жыл бұрын

    freak in awesome! As I used to do my paper route on one of those, it reminds me of all the fun that can be had. Thanks.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Awesome! thanks for watching David! joe

  • @lalansharma2

    @lalansharma2

    4 жыл бұрын

    Hi

  • @timberray9572
    @timberray95727 жыл бұрын

    Just wondering, could you use ratchet straps as a way of clamping?

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    I actually used ratchet straps on my curvy board video which is made of the same identical wood that this was... but in this case it was just easier to use the other clamps as last time I ended up getting a bunch of clue in my ratchet mechanism...lol

  • @iplaygamz435

    @iplaygamz435

    7 жыл бұрын

    how much does it cost for the materials

  • @booboothefool3342
    @booboothefool33427 жыл бұрын

    you should make a really detailed article on how to make this

  • @coen8323

    @coen8323

    7 жыл бұрын

    Eli Pineda you're watching it

  • @cooperhowz2
    @cooperhowz2Ай бұрын

    That's pretty cool. My son would like that.

  • @jgamble482
    @jgamble4827 жыл бұрын

    This is so friggin awesome! I need on of these... with a handle ... and seat. Got busted knees...

  • @tonyaberg735
    @tonyaberg7357 жыл бұрын

    great work looked at the entire video, and I got interested in that myself if I would actually say the same of course, if valid would like to ask how long brought skate board is and how wide🤓😇🤘😁

  • @wiesartist4724
    @wiesartist47247 жыл бұрын

    you should make this electric

  • @shailendrapandit440

    @shailendrapandit440

    6 жыл бұрын

    WIESARTIST yeah he should motorize it to get all the fun

  • @shailendrapandit440

    @shailendrapandit440

    6 жыл бұрын

    Samir Faras why

  • @ConnorWeller

    @ConnorWeller

    5 жыл бұрын

    @Samir Faras why?

  • @Caniballe
    @Caniballe2 жыл бұрын

    This was INSANE! Congratulations, man!

  • @allenu6295
    @allenu62954 жыл бұрын

    That was pretty awesome.. My son is 11 and asking to buy a skateboard, If we work on something like this I think he would use it more. Plus he would be the only kid around here with something like this.

  • @arturofernandez894
    @arturofernandez8947 жыл бұрын

    you can post it a electric motor? sorry for my english wecause i'm from Spain

  • @sanjayrajoriya8871

    @sanjayrajoriya8871

    4 жыл бұрын

    Arturo Fernández eyru

  • @zzzfrshans7842
    @zzzfrshans78427 жыл бұрын

    from where did u get these wheels

  • @lachiedixon410

    @lachiedixon410

    6 жыл бұрын

    There golf buggy wheels

  • @michaelbragg6527
    @michaelbragg65277 жыл бұрын

    Awesome! I love it! Always enjoy these projects! Thanks for the walk through. I just might have to make this one day for my kids.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Michael! It was a fun one... you're kids will love it! Joe

  • @greekgamer95
    @greekgamer957 жыл бұрын

    You have an amazing mind! Keep Up the Good Work!

  • @luzolivares6568
    @luzolivares65687 жыл бұрын

    send it to braille

  • @maxirvine6759

    @maxirvine6759

    7 жыл бұрын

    Luz Olivares before that put an engine on the back 😂😂

  • @deakemarschall2992
    @deakemarschall29927 жыл бұрын

    Great build. Looks almost bullet-proof. But come on, show us the bloopers. We all know you took a header or three on the first runs. :)

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    hahaha... my co-worker wanted me to ride it with the welding mask on... not sure if you've seen that video but there is a major blooper in that one. But actually I never did crash really bad... a few stumble offs but nothing crazy:) But this probably wont be the only 'wheeled' thing I make... so maybe a good blooper will come up soon enough....lol:) joe

  • @BEEP_BEEP.
    @BEEP_BEEP.7 жыл бұрын

    love it bro I have looking how to build my own trucks for over a year and I came up on this video of yours thanks bro a lot I appreciate your video

  • @moacirveigantt6477
    @moacirveigantt64776 жыл бұрын

    muito bom...ficou incrível!!!!

  • @mariosskr8490
    @mariosskr84907 жыл бұрын

    where did you find those wheels

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Harbor Freight:)

  • @hyperhektor7733
    @hyperhektor77336 жыл бұрын

    now add an electric motor and its nearly perfect :D (maybe build a folding version so it size is like a briefcase)

  • @summervibes2738

    @summervibes2738

    4 жыл бұрын

    I found this skateboard on Amazon. Check it out: amzn.to/36zTpTt

  • @yourneighborhoodxenos

    @yourneighborhoodxenos

    4 жыл бұрын

    @@summervibes2738 get outta here with irrelevant links

  • @summervibes2738

    @summervibes2738

    4 жыл бұрын

    @@yourneighborhoodxenos suck it

  • @ismaelp.dominguez1972
    @ismaelp.dominguez19727 жыл бұрын

    Eres un crack !! Mola mucho lo que haces !!! gracias por compartirlo !

  • @peem1244
    @peem12446 жыл бұрын

    Super vid and super board. I think i'd fit a handle to one end so i didn't need to carry it. Keep up the good work.

  • @alanballos6162
    @alanballos61627 жыл бұрын

    amazing! next is to upgrade add motor(electric or gas)

  • @somethingsfishy2695
    @somethingsfishy26956 жыл бұрын

    Who seen Naruto? 7:27

  • @LiquidBaphomet

    @LiquidBaphomet

    5 жыл бұрын

    😂

  • @Niphiz
    @Niphiz7 жыл бұрын

    Awesome board!!!! And also the turning system is awesome,AND built from scratch

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Teo! It was totally a fun project that I wasn't sure would turn out... but end the end it worked better than I expected:) Joe

  • @andreidavid4978
    @andreidavid49787 жыл бұрын

    This is awesome because its completely homemade,board and trucks.👍👍👍

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks for checking it out Lazau:) Joe

  • @Brandon_eh2
    @Brandon_eh27 жыл бұрын

    Don't push with your front foot but you can do whatever

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    haha... I'm not a good skate by any means...so mongo it is;)

  • @Brandon_eh2

    @Brandon_eh2

    7 жыл бұрын

    Ok

  • @user-iw1ml3oo7z

    @user-iw1ml3oo7z

    7 жыл бұрын

    كيف تفعل هذا الكولاج لقداععجبنى

  • @lionking1925
    @lionking19255 жыл бұрын

    My brother literally just broke his knee on one of these things last week

  • @catlost11

    @catlost11

    4 жыл бұрын

    nanai

  • @626Godfather
    @626Godfather7 жыл бұрын

    Moving into my first home.. Can't wait to get into building these types of projects in my garage.. Also, you can add a piece of metal to the nose to act as a bumper/handle to carry that thing back up..

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    That's a great idea Robert! Congrats on the first home too! You're gonna love getting into garage projects... it's my hobby:) joe

  • @10yearvet
    @10yearvet7 жыл бұрын

    Awesome build! Thanks. Personally I think it is very practical for a homestead. Gotta have some fun to offset all that work. Keeps the mental state in balance.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Yes, you are very right... things like this keep my mind going... sometimes too much though...haha! But it keeps me inspired to try things a bit out of the box:) Joe

  • @benrimmer6160
    @benrimmer61607 жыл бұрын

    Hi my names Ben and I'm twelve unlike normal kids I like to build things other than sit on x box all day . I have tried to build these trucks before but I can't get it correct can you send me a truck that I can copy and put on my long board that I made if it is possible I can give you my email and we could get in contact about it Yours sincerely Ben

  • @kyleschmid4046

    @kyleschmid4046

    7 жыл бұрын

    Ben Rimmer why don't you just weld your own trucks little dude

  • @benrimmer6160

    @benrimmer6160

    7 жыл бұрын

    I don't have a welder or an of the materials

  • @kyleschmid4046

    @kyleschmid4046

    7 жыл бұрын

    take metal shop when you get into high school

  • @kyleschmid4046

    @kyleschmid4046

    7 жыл бұрын

    good luck👍👍

  • @lachiedixon410

    @lachiedixon410

    6 жыл бұрын

    Just buy some cheap ones

  • @TheCueUpBlog
    @TheCueUpBlog7 жыл бұрын

    Love this project ! It came out beautiful !!!!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks TCU! joe

  • @valveman12
    @valveman123 жыл бұрын

    Nice project and boy what a view!

  • @kjellski
    @kjellski7 жыл бұрын

    Such a cool project man, keep it up! :) fun to watch you make and explain while doing so! :)

  • @jlf1430
    @jlf14307 жыл бұрын

    Thanks, GREAT project!!

  • @user-kp7gb4hs8q
    @user-kp7gb4hs8q3 жыл бұрын

    Yeah, but can you ollie on it😁 Okay, the board cam at end is epic, love that view and 06:48🐕 is like, wow nice work. During the project my eyes got so big when I saw the 1 gallon size glue, and I was like, hell yeah. (Edit, timestamps was slightly off)

  • @axtreme17
    @axtreme174 жыл бұрын

    Wow That was challenging.But awesome.😮😮😎😎👇👇 👍👍

  • @LENHADOR-
    @LENHADOR-2 жыл бұрын

    🇧🇷 I'M BRAZILIAN, i'ts so easy i see, Like me, very good guy!!

  • @timothythegreat6294
    @timothythegreat62942 жыл бұрын

    great craftsmanship!!! awsome board man ! nice work !

  • @stuffsethmakes
    @stuffsethmakes3 жыл бұрын

    oh man, i missed this one. nice job!

  • @Migysuperfly
    @Migysuperfly6 жыл бұрын

    very cool, love the truck design. i was looking for an off-road skateboard i could use daily to get around with here in jamaica

  • @sharadnepali7188
    @sharadnepali71887 жыл бұрын

    man!!!! u make it look so easier to build thanks for the diy

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Glad you liked it Sharad:) joe

  • @sharadnepali7188

    @sharadnepali7188

    7 жыл бұрын

    i did like it man :P i have done the same with the truck i have the wheels board is full on heavy duty metal but im building electric ones its still in process

  • @sharadnepali7188

    @sharadnepali7188

    5 жыл бұрын

    Now after years later im working it on the wooden deck as you did. thanks for the great tutorial ! ;-)

  • @RYEINDUSTRIAL
    @RYEINDUSTRIAL7 жыл бұрын

    Great build! That thing turns really good. Great for tight trails and such. Great vid, Joe. Cheers!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks RI! It was an awesome fun project to do. I probably won't ride it too often but it has been fun so far!

  • @mikezof3690
    @mikezof36903 жыл бұрын

    Great video, great image quality thanks a lot!

  • @Retroweld
    @Retroweld7 жыл бұрын

    Whoa! That think is awesome! Excellent!!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Douglas! It's that RW branded welder that did it...lol...hopefully one day I'll be able to put your sticker on a better quality one! Joe

  • @tukoramirez8478
    @tukoramirez84782 жыл бұрын

    amazing build!

  • @USNERDOC
    @USNERDOC7 жыл бұрын

    Sweet mountain board!

  • @HoofInDenver
    @HoofInDenver7 жыл бұрын

    Wasn't expecting you to fabricate your own trucks! Nice job man!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Chris! It was a super fun project and the trucks were actually the thing I was worried about. I figured it would work but wasn't sure if it would be smooth or not... and surprisingly they worked better than I expected:) Very gushy with the first springs but the stiffer ones are much better:) Joe

  • @mykhall688
    @mykhall6887 жыл бұрын

    That's s great project. Good job.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Myk! Joe

  • @groundskeeper5292
    @groundskeeper52927 жыл бұрын

    Very nice craftsmanship. Excellent homemade trucks. I've got to do one of these.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much GK52! Joe

  • @IdRatherMakeItMyself-Net
    @IdRatherMakeItMyself-Net7 жыл бұрын

    Wasn't expecting this at all but it is really cool!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks! It was definitely an odd project... but I love em all the same. Now I gotta figure out my pallet wood parachute harness;) Thanks for watching IRMIM! Joe

  • @gabor3849
    @gabor38494 жыл бұрын

    That is soo cool! 🙂

  • @pacoaranha
    @pacoaranha7 жыл бұрын

    Loved it! Congrats!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    thanks! Joe

  • @MNTB77
    @MNTB777 жыл бұрын

    That board looks rad. Another great build!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks MNTb77! Joe

  • @Josefppaz
    @Josefppaz5 жыл бұрын

    Oh man that looks like fun thanks for sharing hahahahaha I want to build one now

  • @servicemancba
    @servicemancba7 жыл бұрын

    love it!!!! great job!!!!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much ServiceManCBA! Joe

  • @charljoubert6993
    @charljoubert69937 жыл бұрын

    What a fun video, Thanks Joe

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    It was super fun to build and ride too! Thanks Charl! Joe

  • @CamaroRick
    @CamaroRick7 жыл бұрын

    That was awesome!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks Rick! joe

  • @alainb4734
    @alainb47347 жыл бұрын

    Amazing! That's excellent! You're creative and you did a very good job. I'm interesting to do the same. Thank you for sharing Cheers, Alain from France & Switzerland

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks for the kind words Alain! Great to hear from Switzerland and France.. .would love to visit someday:) Joe

  • @trackpighilo1741
    @trackpighilo17416 жыл бұрын

    Awesome video mate kudos!!!

  • @iamremnantrc9712
    @iamremnantrc9712 Жыл бұрын

    Nicely 👍 Done!!!!!!!

  • @HighnoooonBBQ
    @HighnoooonBBQ7 жыл бұрын

    Perfekt. Klasse gemacht. Schöne Grüße aus Germany.

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Vielen Dank! Große aus Deutschland zu hören! Danke fürs zuschauen:) Joe

  • @ivandiegpontacana
    @ivandiegpontacana7 жыл бұрын

    Wow just wow!!

  • @sabribalcin1252
    @sabribalcin12527 жыл бұрын

    seriously awesome!

  • @homesteadonomics

    @homesteadonomics

    7 жыл бұрын

    Thanks so much Sabri! Joe

  • @jeffoffej
    @jeffoffej5 жыл бұрын

    Super cool build dude!

  • @user-it8xg8yk8g
    @user-it8xg8yk8g4 жыл бұрын

    amazing‼️