good job Mr.Robert Kocian

@RobertKocian

3 жыл бұрын

Thank You very much :-)

Que acabamento top !!!

Best youtube vid I've seen in awhile, nice effin job!

@RobertKocian

5 жыл бұрын

I think there is a hundreds better DIY videos on youtube. But Thank You very much :-)

@Allrounder77860

Жыл бұрын

kzread.info/dash/bejne/k4lmksuEg5mdgtI.html

Parabéns pelo trabalho👏👏👏👏✔️✔️✔️

Супер , цікаве рішення . Дякую за відео 👍

Спасибо!!! Очень понравилось!!!

Buen video. Buen trabajo

@RobertKocian

5 жыл бұрын

Děkuji moc :-)

Very impressive, may i please ask, how does those skateboards go right and left while driving them ? 🤔 a normal skateboard is light, so it can be controlled easily, what's about these kinds ?

@phoenixcreations94

2 жыл бұрын

Well, i got it, u just lean to the side u want to go to, and ur weight will change the direction, cool

I admire you man

Do the trucks need the angle (on the frame) in order to turn? \_______/ Inspired by your video Buying square tube today!

@RobertKocian

5 жыл бұрын

Trucks has to be angled for turning. How to do it, it's up to you. Good luck :-)

Nice fabbin! Can you tell us what blades you use in the chop saw and angle grinder. They look to cut like butter. Thx from boise,ID.

@RobertKocian

4 жыл бұрын

It just looks so simple. Speeded up movie. Saw blade is basic included with cutting saw. And classic metal cutting discs for angle grinder. Material is mild steel. :-)

@Allrounder77860

Жыл бұрын

kzread.info/dash/bejne/k4lmksuEg5mdgtI.html

Amazing

Ciao volevo chiedere se poteva mettere il modello 3D come immagine così posso provare a riprodurlo e anche le misure grazie comunque sei un fenomeno complimenti

For a complete noob, what reading material/ subject , etc should I learn, in order to fully understand how to make this and beyond ? Any information would be greatly appreciated

@RobertKocian

5 жыл бұрын

It's just a handmade by the style trial and error. It's not nuclear physics. First, find out if someone did something similar before. If it works, use it.

Hello, Congratulations for the realization, do you have the plans if you don't mind? Thank you.

@RobertKocian

5 жыл бұрын

Hello and Thank You. Yes I have. In last video about building will be published complete documentation. I hope I will succeed during May.

@valentincabanes5711

5 жыл бұрын

@@RobertKocian Thank you for sharing!

Big master!

@RobertKocian

4 жыл бұрын

I don't think so. Thank You.

Hello Robert, obgd for the help only one more thing you could pass me the exact sizes of the peneus and bead bean.

@RobertKocian

2 жыл бұрын

Hello. Tyres are 2.50-4, rims 2.10-4. "bead bean" sorry, don't understand

Possible measurements of the need after your ear

hello friend, do you have the projects you used in the video?

Hi, is the mild steel strong enough in your opinion? Also, are the tubes 40x20mm?

@RobertKocian

3 жыл бұрын

Hi, this is the only weak point photos.app.goo.gl/1wmW3HR9HcC9JuZg8 Others are OK. Square tubes are 30x20x2. Steel board is very heavy.

@Androidfan44

3 жыл бұрын

@@RobertKocian thanks Rob. Here's another design that intrigued me. The single tube in middle may decrease the weight, do you think? Secondly, is it possible to resolve the weak point in the design. Is it material strength or design issue? kzread.info/dash/bejne/dGx_r9lycbDeYJs.html

What program you use for sketching?

@RobertKocian

5 жыл бұрын

Autodesk Inventor

просто суперрррррр

I think that wheel on terrain can't slide as a snowboard on snow, so what about braking?

@RobertKocian

5 жыл бұрын

That's right. This is just basis for electric design. There is a motor brake now.

Mr Robert i have a situation, i don't find exact motor you were used in the build KEDA 63-64 190Kv brushless Outrunner 10S 2000w, couls you pls recommend me which are compatible, thanks in advance

@RobertKocian

3 жыл бұрын

Hello, yes I noticed that KEDA is no longer produced. Search on ebay, aliexpress, banggood etc "brushless motor 6364 200kv" It has same (very similar) parameters as KEDA. Unfortunately, the difference is in the diameter of the shaft. KEDA had 8mm shaft diamter. Other motors have 10mm diameter. Be careful on this. I also recommend checking the spacing of the mounting holes if they match with KEDA.

@tejnamburu7409

3 жыл бұрын

@@RobertKocian Thank you so much for quick response

where did you get the springs?

@RobertKocian

4 жыл бұрын

here: bit.ly/2klkw2u from our Czech local board shop.

Can I get these blueprints emailed to me?

zdravím, odkud a jake mate pruziny? Taky se chystam na vlastni stavbu :) dik za inspiraci

@RobertKocian

5 жыл бұрын

Ahoj, pružiny jsou normálně z nějakého mountainboard shopu. Hledal jsem, jestli třeba v Alcomexu nebo nějaké jiné pružinárně nebudou levnější. Nebyly. Vychází to všechno podobně cca 500,- za 4 kusy. Dnes bych ten board možná udělal s trochou míň železa. Je to dost těžké. Cca 15kg jen základ bez pohonů a baterky.

@SuperZelenina

5 жыл бұрын

@@RobertKocian Super, diky, tech 8km jak rikas, jsi ujel na autobaterii, tzn 12V? Jaky planujes pohon do budoucna a jakou baterii ?

@RobertKocian

5 жыл бұрын

@@SuperZelenina jasně na normální autobaterku 12V 60Ah. Ale těch 8km jsem nejel až do vybití baterie. Napětí klesno na cca 11,5V. Auto šlo potom normálně nastartovat. Zatím mám vyhlídnutý LiPol 6s 20Ah Turnigy z HK. Mám tam RedBricky 125A na maximálně 7s baterku. Motory KEDA 63-64 190KV Brushless Outrunner 10S 2000W taky z HK. S lepším esc by se dalo vyšroubovat napětí až na 10s a tím to zrychlit. Ale jestli s 12V (3s) to jelo cca 15km/h po rovině, tak pokud to s 6s pojede kolem (do) těch 30km/h na zlámání noh a ruk mě to bude bohatě stačit. S baterkou ale ještě vyčkávám, až jaké naměřím hodnoty odběru proudu, aby to snesla. Původně jsem chtěl vyrobit pack z Li-Ion 18650, ale elektro komunita mě lámala do Li-Pol. Zatím ještě stoprocentně nevím, čím to nakrmím. Přál bych si dojezd kolem 20km. Je to ve vývoji :-)

@martindzurik7478

5 жыл бұрын

@@RobertKocian Ahoj, pekne si to tu rozpisal, ja mam este otazku , kolko zubove mas tie kolieska na pohon a odkial si ich objednal, je to 15mm siroky remen? vacsie kolieska som nasiel len 10mm sirka z ali bit.ly/2vTvCOe , a este ako ovladas tie 125A esc bezdrotovo ?, ja som nasiel na ovladanie na ali len tento komplet ktory neviem ci nebude slaby bit.ly/2Lzr6Py

@RobertKocian

5 жыл бұрын

@@martindzurik7478 Ahoj, až teď jem si všimnul, že tvůj koment byl ve spamu. Asi kvůli těm odkazům. Řemenice jsou z eBaya. Jsou to HTD 5M 72 zubů a 12 zubů. Šířka řemene 15mm. ebay.to/2Ektd3G ebay.to/2WYvGbl Ovládání se jmenuje Nano 2.4GHz mini remote controller taky z eBaya. Je to jen vysílač a přijímač. Jestli ten komplet nebude slabý? Po rovině na asfaltu rychlostí chůze to asi stačí. Ten můj má odběr do kopce 15% na asfaltu cca 70A při 6S baterce.

Solo le faltaba gritar : wiiiiiiiiiiiiiiiiiiiiiiiiiiiii !!!

WOW

Hi can i have a copy of instraction.tnx

👍👍👍

what is the length of this spirale ?

@RobertKocian

5 жыл бұрын

You mean truck springs? 62mm without load.

How can I buy your board? And if you could, what is the price? I'm from México

@RobertKocian

4 жыл бұрын

Hello, sorry You can't. It's just inspiration with documentation on web for own build. I'm not manufacturer. This board is not perfect. A lot of errors. Mainly weight.

@israelrch

4 жыл бұрын

@@RobertKocian ok thanks, nice job

Are those tires air or hard tires

@RobertKocian

5 жыл бұрын

Air. Tire valves that are visible are real. No fake :-)

Hello! Thank You for this video, but can you give the dimensions of each part or drawings? Congratulation! You are the first person to make such a video on KZread! I`m from Russia, and my level of English is bad). Thank you in advance!

@RobertKocian

4 жыл бұрын

Hello. Don't worry, my english is total terrible. Thanks for G translator :-) Did you read video description?

@corbicheat1814

4 жыл бұрын

@@RobertKocian Plans?

@corbicheat1814

4 жыл бұрын

@@RobertKocian There are no drawings or dimensions on this site

@RobertKocian

4 жыл бұрын

Did you scroll the web page down?

@corbicheat1814

4 жыл бұрын

@@RobertKocian I`m sorry) Thank you!

Where can I get your drawing blue prints?

@RobertKocian

4 жыл бұрын

Video decription ;-)

Прикольно. Гуфи :) Правая нога вперёд.

Hello, can you give me the plan with the correct measurements to be able to manufacture it ??

@luisalfredomunozaguilera4416

2 жыл бұрын

There are only images, no one tells me how long each tube is

@luisalfredomunozaguilera4416

2 жыл бұрын

100 cm, 90 cm ???

What tyres are those? What diameter?

@RobertKocian

5 жыл бұрын

Diameter is 210mm. It's about 8 inches.

Merhaba bende bu kaykay dan yapmak istiyorum profil ölçülerini uzunluklarini yazabilirmisin ben çim biçme motoru kullanacağım elektrikli yapmayacağım bu konuda yardımcı olursanız sevinirim teşekkürler

Were can i get the Drawing???

@RobertKocian

4 жыл бұрын

If You can't find the drawings here, It is useless for You anyway. Would you like to bring them to your bedroom? Or click a few times? Use You brain please ;-)

the truck mounts need a strongback, that weld is in tension so it could crack

@RobertKocian

4 жыл бұрын

When weld crack , I'll deal with it. Now It's OK after about 400km. Thanks for the idea.

whre did you get the wheels?

@RobertKocian

3 жыл бұрын

In our local hardware store. Look for 2.50-4 wheel with bearing 6204 (ID20mm)

Hello Robert, I loved your work, could you pass me these project papers to me pfv? I room try to make a tbm

@RobertKocian

2 жыл бұрын

How about reading the description of the video?

@conradosantos9637

2 жыл бұрын

Obgd Robert, I'm Brazilian and I'm not sure how I'm going to buy the parts of the electrical part ... I've done some research and td expensive my salary not even for a board, could you help me sla with something the thing a cheaper site or send me a list of what I need the electrical part ... Because I want one to be able to go around hiking and

@Allrounder77860

Жыл бұрын

kzread.info/dash/bejne/k4lmksuEg5mdgtI.html

How about suspension?

@RobertKocian

4 жыл бұрын

None :-)

Me podrías mandar el la estructura del dibujo por favor

@RobertKocian

4 жыл бұрын

See video description :-(

Hello Robert, I would like to know if you sell this project?

@RobertKocian

Жыл бұрын

Come on! Read the description!

@igodealencarsimplicio8351

Жыл бұрын

@@RobertKocian ????

@igodealencarsimplicio8351

Жыл бұрын

@@RobertKocian do you no longer have this project? Sorry if I don't understand what you're talking about because I'm Brazilian

@RobertKocian

Жыл бұрын

@@igodealencarsimplicio8351 See the description under video. There is a link about build and plans. For free ofcourse. Greetings to Brazil 😀

@igodealencarsimplicio8351

Жыл бұрын

@@RobertKocian Thank you, Robert, it's a pleasure to chat with you, whenever you want to go to Brazil, you are welcome to my humble home. I'm not thinking about downloading the documents, but thanks in advance, Robert

What is the tire dimension ?

@RobertKocian

3 жыл бұрын

2.50-4

@abhijitc215

3 жыл бұрын

@@RobertKocian 4inch dia.

@RobertKocian

3 жыл бұрын

@@abhijitc215 Hello Abhijit, wheel is consist of rim (2.10-4) with bearings 6204 and tire (2.50-4). Outer diameter of the wheel is 210mm after measuring with a ruler.

@abhijitc215

3 жыл бұрын

@@RobertKocian ok thanku for your valuable reply. I want to make a skateboard please you send me the CAD drawing.

@RobertKocian

3 жыл бұрын

@@abhijitc215 Did you read the video description?

can i get.... Drawing Plz.

@RobertKocian

5 жыл бұрын

Yes you can. Be patience. In last video about testing will all documentation published. I hope during may.

@TungChuZa

5 жыл бұрын

​@@RobertKocian Thank you very much

Would you be able to send me the specs and dimensions?

@RobertKocian

5 жыл бұрын

Be patient. There is a mess in my documentation. After finishing this project, I will purge and prepare the documentation for publication on my web pages.

@jeson2597

5 жыл бұрын

@@RobertKocian thanks much appreciated

please

Hiii

That looks too heavy man.

Hell man you are cutting cutting steel with that wood blade that isn't abrasive wheel..😂🤣😂