Hands down, one of the best setups I've seen yet! I love how you designed it so that you can remove the grinder for cleaning.

@mrtjcoleman

10 ай бұрын

Not my idea I just copied what I seen on here. I'd like to use a different motor one that won't shutdown from over heating from it running to long

nice job. One of the only ones I've seen where you can remove the grinder for cleaning.

Gd pm sir idol,iam watching from Phil.🇵🇭 Thanks for your tips I try to use tricks making pellet for my small RABBITRY ♥️🙏God Bless sir

Are you happy with the size 22 grinder? Do you have any videos of you using it? I am ready to pull the trigger and getting the 880 motor from harbor freight, it has a much heavier motor and spins a little bit slower. I’m up in the air over a # 22 and a # 32. Any suggestions?

@mrtjcoleman

3 ай бұрын

I apologize for the late response I'm just now and seeing where you come in and on the video. I will say that I'd like to set my setup but the only issue with it is that those Motors aren't necessarily made to be continuously running for a long period of time they will overheat and shut off until they cool down even though it does have a fan on the back side of the motor. I do plan to add a fan in the base under the motor and hopefully that will cool it down as it's running. That grinder has been perfect with no issues

@mrtjcoleman

3 ай бұрын

I do have video of me using it I'm just not sure how to add a video for you to see it

Идеальная система для тех, кто занимается винокурением на пророщенном зерне. Бытовые мясорубки плохо справляются с помолом мокрого солода. А Ваша система подойдет замечательно.

Great job, that looks fantastic, thanks for the idea of harbor freight motor.

@mrtjcoleman

2 жыл бұрын

Be sure not to overwork the motor it will overheat and shutdown until it cools down

@jimswanny1193

2 жыл бұрын

How long is to long to over work it? I will be doing like 12 lb of pork but at a time or the same amount of chuck

@mrtjcoleman

2 жыл бұрын

@@jimswanny1193 throughout that process you'll want to shut it down maybe after 20 or so mins and let it cool down you can feel the motor casing as you're using to for hotness once it starts getting pretty warm then shut it down

@jimswanny1193

2 жыл бұрын

Thank you very much i really appreciate it. Is there a reset or does it just need a rest. I will keep an eye on it, good looking out.

@mrtjcoleman

2 жыл бұрын

@@jimswanny1193 just let it rest

👀👍

How much kw is this electrical motor?

@mrtjcoleman

3 ай бұрын

I'm not exactly sure how many kilowatts the motor is. But I purchased the hoist from Harbor Freight so you should be able to find the information on their website or the manufacturer's website

Great video, can you send a link to the motor. Thanks

@mrtjcoleman

Жыл бұрын

www.harborfreight.com/880-lb-electric-hoist-with-remote-control-62854.html

@solowjumper

Жыл бұрын

@@mrtjcoleman I found a lift motor with a speed of 32.8 ft per minute. Do you think that would work??

@mrtjcoleman

Жыл бұрын

@@solowjumper if it's a lift .otor it should be fine that don't rotate to fast

@solowjumper

Жыл бұрын

@@mrtjcoleman one last thing, do you have a video of your grinder in action ? Thanks

What was the cost of the motor?

@mrtjcoleman

2 жыл бұрын

Around 100.00

@rickx1621

Жыл бұрын

To pay $100 for the motor & who knows how much for the grinder... LIKELY cheaper to buy a used meat grinder... you THINK?

What size of socket did you use..